Hi guys i got my ultimo yesterday morning scanned all sats in use 13+19+23+28east +the dtt(soarview)and put in my official cards but to my suprise the cards don't get read at all ,one is a canaal digitaal nederland card and the other the white sly card.I was expecting the dutch card to be read no problem anyway is there anyway to activate the card readers before i go into the thirth party software wich would be very new to me.
And what is a source code the manual is talking about this will i need this for anything.
ultimo card readers not recognizing cards
- thijss
- Thread is marked as Resolved.
-
-
Are you using any EMU like CCcam or oscam, or are you expecting the card to clear with default softcam.
-
not using anything yet just the firmware the ultimo came with very new to enigma or linux so i could do with a good guidance
-
not using anything yet just the firmware the ultimo came with very new to enigma or linux so i could do with a good guidance
thijss,
heres what I recommend -
* install BlackHole 1.7.0 as your image - download from here
* install the latest TSpanel from here
* from within TSpanel, click into the 'linuxsat_support_Addons' section and install 'Oscam6059+CCcam213-Sly_UK-E2-BH' from the 'Cams - BH Oscam+CCcam with Configs' section
This will get your white Sly card working in your upper slot (once you enable Oscam 6059 / CCcam 2.1.3 as your default cam)
When you get to that stage..report back and someone can advise with your CD card!
Its unlikely you'll need the source code and to get the most out of your box you really have to go 3rd party so start reading, theres plenty of info here :)
-
thanks i'll try that could you give me a link to the TSpanel again please cause the link in above post brings me to the b.h.image too(both links)
Rgds.I asume that ccam 2.1.3 is safe
I saw a bad report on the CCCAM 2.3.0 that when your stb is inactive the cccam 2.3.0 will start sending your lines to some german ip adress -
-
got the black hole image on my ultimo and found an old cam for my c.nl card working okay now,just don't know how to get the TSpanel installed tried a few way's now,i'm must be missing some link some where.
-
follow sandmans instructions then using dcc move tspanel into temp folder on your ultimo and do not reboot
hit green then yellow button then scroll down to manual install its one out of the 2 and install it then reboot then tspanel will be in the main menu as well as green button -
not sure what dcc is but i'll give it a go in the morning and see if i can find this
-
not sure what dcc is but i'll give it a go in the morning and see if i can find this
Its an all in one program called Dreambox Control Centre!
You could also use a standard FTP client, FTP into the box and transfer the TSpanel ipk into your /tmp folder (then follow scoot's install instructions)
Report back and let us know how you're getting on....I'm just finishing a set of Irish channel VFD picons so you can take advantage of them later today!
-
I need some more info folks i'm getting lost here with all the terms for a noob like me ,what is standard FTP client or Dreambox Control Centre where would i find it and where would i run it and how would i transfer the tspanel into my /tmp folder go easy on me lads.:surrender:
-
FTP client would be tools like filezilla, total commander, dreambox control center etc, DCC-E2 Latest Version.
TSPanel file is in IPK format, so follow this tutorial, How to - Enigma2 dreambox ipk files installation.
-
still means nothing to me what do i do with these files do i run them on pc or on the vu+?
-
FTP the ipk from the PC to the VU+ with dreambox control center to the folder /tmp/ press Green > yellow button > manual install ipk package, or follow the tutorial i posted.
-
found my vu+ ip adress?
maybe this is to much for me yet? -
You will find it in your router or with dreambox control center, click search ( highlighted in yellow ).
-
thanks lads i have the tspanel installed very confusing compared to my technomates but i'm sure i learn as i get along with all of you're help of course.
and a lot of terms i don't understand yet .
Let yi know how i get on from here.
Rgds -
thijss,
heres what I recommend -
* install BlackHole 1.7.0 as your image - download from here
* install the latest TSpanel from here
* from within TSpanel, click into the 'linuxsat_support_Addons' section and install 'Oscam6059+CCcam213-Sly_UK-E2-BH' from the 'Cams - BH Oscam+CCcam with Configs' section
This will get your white Sly card working in your upper slot (once you enable Oscam 6059 / CCcam 2.1.3 as your default cam)
When you get to that stage..report back and someone can advise with your CD card!
Thanks guy's my white card is working perfect ,anyway of getting my CD card working in the second slot i want to share it with my tm's at some stage -
I will write the configs for you at some stage today, just got my own ultimo so having a play first.
-
Thanks guy's my white card is working perfect ,anyway of getting my CD card working in the second slot i want to share it with my tm's at some stage
Right just tried and noticed since i enabled Oscam 6059 / CCcam 2.1.3 as my default cam the CD card reads perfect in the bottom slot of my Ultimo
now i have to find out how to share the cards with my tm's and how to put in c-lines from my v-plugserver or is there something out there that will run the keys of open providers with emu's on the vu+'s any link's or guides lads
VU+ ULTIMO PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!