Hi everyone
I have a Vu+ Solo 2 and just installed BlackHole 2.1.7. Then I installed CCCam 2.3.0 but it`s not working. When I use CCCam info all the servers are red. I have tryed many CCCam`s but same result. Nothing wrong with the C lines, they have been tested. Anyobe have a god answer on this?
Problem with CCCam 2.3.0 on Vu+ Solo2 with BlackHole 2.1.7
-
- Various Support
- RuneBergen
- Closed
- Thread is marked as Resolved.
-
-
Is your solo2 network connection working correctly?
-
Yes the network is all green and working.
- - - Updated - - -
Use long time before the IP comes green, and sometimes the nameserver fails and goes red. Can that be the reason? And how do I solve that?
-
Yes the network is all green and working.
- - - Updated - - -
Use long time before the IP comes green, and sometimes the nameserver fails and goes red. Can that be the reason? And how do I solve that?
Reboot your router is where i would be starting.... and also check that there are no ip addy conflicts on your network.
-
reboot like restart or press som button on the back? No conflict on my network.
-
unplug your router for a few minutes ..
Presuming you have already but :
Activate CCcam by pressing BLUE then arrows left/right to find it then OK..
Full restart box
How did you "test the lines" ?? on another box within your network?? -
I have done all that, still nothing. I tested the line in another tuner I have.
- - - Updated - - -
Also sendt a testline I have to my brother, and its green. In my tuner its red.
-
hi, have you try to re dowload another bh image and do new installation?
-
Yes I have tryed difrent BH images, and difrent CCCam.
-
Where are these C lines you are testing from???
-
They are in var/etc in the file CCcam.cfg
-
They are in var/etc in the file CCcam.cfg
What i mean is who has given you the lines??? where do they originate from??
-
I have a abonement on them, do not remember the name
-
I have a abonement on them, do not remember the name
Are these lines from payservers?
-
I do not know, my brother have fixed this for me.
-
Erm i think this maybe the real problem here.... Test lines etc only going to work on one receiver. Think you may need to re-read the rules here bud regards payservers etc...
Sent from my iPhone 6s using Tapatalk
-
The testline was just to get some fresh lines I would know worked. And I did get more the one testline and used them on my other tuner. I think my problem is DHCP/DNS, need to ask the broadband company tomorow if they problem with them.
-
With test lines you would never know what works or doesn't.... This thread is now closed.
Sent from my iPhone 6s using Tapatalk
CCcam Support Forum
Configs, discussion, downloads and guides for CCcam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!