Help with Vu+ Solo 4K Tuner set up

There are 9 replies in this Thread which was already clicked 3,691 times. The last Post () by sunlight786.

  • I have bought Vu+ Solo2 4k install openAtv latest


    It have twin Dual tuner


    My dish got normal standers LNB
    I have insert 2 x input wire to tune a AND b


    I have set the tuner A&B as


    config simple
    Mode single
    Sate 28.2e



    there are some more tuners and I like to know how can I set them up so I can get maximum recoding benifits ?


    Please help me out

  • Thats great


    I have option direct from supplier that if I do not like this box then I can exchange with Vu Duo 2


    can you advise me what to keep ? solo2 4k or vu duo 2


    vu solo 2 4k only support oscam and nothing else as I been told, It also do not support Usb OptiCombo usb C tuner


    also where can i get oscam to download for this solo2 4K?

  • you can find it by searching the forum. Or if you have got the linuxsat support addon. It's the 11196 arm version.


    You can download it from there. You wouldn't need a usb c-tuner. You can get a plug and play tuner. So no need for a usb one. You can have up to 4 tuners on the solo 4k. Mine has 2sat and one cable. I'm sure you can buy the tuners separate, if you wanted to.

  • there is no success mate with these funny tuners.


    I have set tuner A&B to single.simple, 28.2e


    tuner c , d , e , f ,g , h showing not configured


    when I leave them alone then I can record more then 2 separate channels.


    if I make then as
    Advance
    28.2e
    Lnb not configured or Lnb 1


    It all messed up now.


    can some one please guide me step by step
    I am sure some one here definitely got this box with right setup.


    I d,nt think It work only with Unicable Lnb as I have standered 4 out put Lnb

    • Official Post


    I would keep the solo4k, i have both receivers and the solo4k is now my main receiver, i`m very happy with it..


    Oscam emu ALL Images mips--arm .ipk .deb



    Configure Tuner A & B, leave the rest unconfigured, they will be used automatically when you start recording more than one channels..

  • Dear Master G


    I have done exact same as you told me last night.


    when I record 2 x channels then many channels grey out( not available )


    with 2 x permanents tuners how many channels can I record freely( different frequency) while watching one freely


    Manufacture said I can record almost 6 to 8 channels with out even any issue but it,s not doing as I am hoping.



    Fixed Dual FBC Tuners:


    But before we look at that, let’s look at the Dual Fixed FBC tuners. FBC stands for Full Band Capture. This new FBC tuner, will allow you to tune into 4 different frequencies per tuner, which means that you effectively have 8 tuners inside your Solo 4K and if you have the optional twin pluggable tuner installed too, this gives you a total of 10 tuners.


    To get the maximum from the Dual FBC tuners you will need to use a Unicable LNB, this means you can choose to view / record 4 different frequencies per tuner, however using a conventional lnb as found on most current satellite dishes around the world, it is still possible to tune to 8 different tv channels, but there are some limitations to which frequency’s you can tune at the same time.

VU+ SOLO 4K PVR ready Linux Enigma2 Receiver UHD 2160p

Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!