Hi,
Can someone advise how I flash the Vu+ Solo SE V2 via USB.
I have the USB stick formatted in FAT32
vu plus folder copied (as normal) to the USB stick.
Switched off the box
Plugged in the USB stick to the port on the back (tried both of these)
Switch the box on
The USB flashes for a second then the box boots as normal without flashing.
Am I missing a trick here and is there a different method for flashing this box?
Thanks
- - - Updated - - -
Found this so it seems like I was trying to do it right but there was a problem with the files in the image I was using. Tried again with a different image and it seems to have worked.
Code
If this is your first Vu+ receiver, you will be pleased to know, that installing an image onto any of the Vu+ receivers is a very simple process. Simply grab a Usb stick, format it in fat32 with your pc, download the BlackHole image from www.vuplus-commuinity.net (other images are available from different teams) and extract the zip file contents to the root of your newly formatted Usb stick. Once this is done, plug the Usb stick into 1 of the rear Usb ports and then power the box on.
The SoloSE will do the rest and once flashing is complete it will flash the power button on and off, to let you know that it has completed. So you simply power the box off again, and remove the Usb stick, and then power the SoloSE back on again.
It’s a very quick and simple process and typically around 1 minute to reflash.
Display More