is there any way in tv headend to add or a way to configure channel list so there in order i know with 28.2E u could go to bouquets and configure based on region but this isn't a option for dvb-c any help would be appreciated as the only way i can see atm is to manually order the channels and channel numbers
bouquets help
- krisg12
- Thread is marked as Resolved.
-
-
I don't know about tvheadend, but you can do so in E2.
You can use AutoBouquets Cable. (This is script based and uses dvbsnoop, so somone should be able to adapt it to work in TvHeadend too)
You can also use AutoBouquetsMaker. -
would i be able to use AutoBouquets Cable then back it up and use e2 to tvheadend channel list converter ?
-
would i be able to use AutoBouquets Cable then back it up and use e2 to tvheadend channel list converter ?
Don't see why not. Only one way to find out. -
seems there is no ch.list after running AutoBouquets Cable unless im looking in the wrong place in the open spa image (/etc/enigma2) any way to generate this or am i just looking in the wrong place
-
Not tried the openspa image. It should be the same otherwise cahnenl editors wont work with their images.
Are the bouquets on the receiver and working?
-
reply yes there working on the receiver but when copied them to a folder to put though e22tvh i get a path error message so tried with just lamedb and get cant find all files from E2 Ch.List but if i specify the file with all files in i'm getting a run-time error 76 (path not found)
guess it getting to the time to arrange manually :'( -
Might be worth you trying Pbnigma and use ABM before you do the manual editing.
-
you could just use dreambox edit to pull the files over ? then use to the same prog you using to send to wetek ;) nah ?
-
When using dreamedit was getting E2 Ch.List not found but using Pbnigma image and ABM i was able to get it to work with the converter apart from channel numbering so just modified them manually
Thanks for the help :)
-
When using dreamedit was getting E2 Ch.List not found but using Pbnigma image and ABM i was able to get it to work with the converter apart from channel numbering so just modified them manually
Thanks for the help :)
Replace the files in this folder to yours it should be C/programs(86)/wetel/E2toTVH back up yours first offcourse and let these over right yours
and this will resolve that issue from now on ;)
-
master G
Moved the thread from forum WeTek Play Support to forum WeTek Play. -
master G
Moved the thread from forum WeTek Play to forum WeTek.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!