090F in Oscam

There are 10 replies in this Thread which was already clicked 2,063 times. The last Post () by Spawn32.

    Hello All.


    I know this has been asked before, but i have tryed every solution that i could find in forum, but still cant get oscam to read Via**** 090f card.
    Under initialisation it says that card is not supportet! Can this be true?
    My configs are:


    oscam.server
    [reader]
    label = upper
    protocol = internal
    device = /dev/sci0
    detect = cd
    mhz = 450
    cardmhz = 2700
    group = 1
    emmcache = 1,3,2,0
    blockemm-unknown = 1
    blockemm-g = 1


    [reader]
    label = lower
    protocol = internal
    device = /dev/sci1
    caid = 090F
    ident = 090F:000000
    readtiers = 2
    detect = cd
    mhz = 450
    cardmhz = 2700
    group = 2
    emmcache = 1,3,2,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-g = 1
    boxkey = 0C******


    oscam.conf
    [global]
    nice = -1
    preferlocalcards = 1
    logfile = /dev/tty
    unlockparental = 1


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 6
    user = dvbapiau
    boxtype = dreambox


    [monitor]
    port = 988
    serverip = 127.0.0.1
    monlevel = 4


    [webif]
    httpport = 25645
    httphelplang = dk
    httprefresh = 10
    httppollrefresh = 10
    httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
    httphidetype = sh


    oscam.dvapi
    P: 0B00
    P: 090F


    Can someone please help???


    - - - Updated - - -


    forgot to write that it is on a VU+ Solo2 with openATV, and oscam_atv 1.2 10659

    • Official Post

    Try with the configs below (you may need to convert the boxkey and add boxid to oscam.server). If you have problems show us an oscam log from startup and while viewing channels..


    #### oscam.conf ####



    #### oscam.server ####

    Code
    [reader]
    label = VIASAT
    protocol = internal
    device = /dev/sci0
    emmcache = 1,3,2
    group = 1
    caid = 093E,090F
    ident = 093E:000000;090F:000000


    #### oscam.user ####


    Code
    [account]
user = linuxsatsupport
caid = 093E,090F
au = VIASAT
group = 1


    #### oscam.dvbapi ####

    Code
    P: 093E:000000
P: 090F:000000

    Sorry for my late reply. I have tried the configs, the card works with theese, but all users disconnect. anyboddy knows why??


    I dont have /dev/tty is there anywhere else i can use this?

    Edited once, last by apebk ().

    How many N:line are you using?
    Do you use the same user name and password to all peers or difrent username and password ?


    In your case , You must use device = /dev/sci0,device = /dev/sci1, and so on. Please check which card on which slot!


    good luck,

    Nope :/ sorry..
    And from the rumors they are working very hard to exchange all the 090F cards to 0940 right now, rumor is that by the end of may they will alle have been exchanged..


    Btw, Tv3 HD D/N/S worked on the 0940 until about a week ago.


    /Spawn

    Edited once, last by Spawn32 ().

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login