VU + duro
camosFS 9.19
openPLI 4.0
Then I managed to get camosFS installed.
However, I get the message
Connection could not be established
no camera found
when I try to "add a new camera"
How do I set the camera up to run like this on a synologi server:
IP: 192.168.32.41
User: admin
Password: xxxxxxx
[ONVIF]
[Generic_ONVIF]
Video Format: H.264
Audio: G711
TCP
What about HD channels on 090F do they work?
Hello again
You can just cut the text and paste it here, just as I did in the worked here for years.
There is also a forum only for configurations that work, divided by cards.
You're welcome, you could post the files that works so others can use the experience? Possibly. the forum that brings together the configurations that works
[reader]
label = CD
protocol = smartreader
device = 001:004 # Your reader
caid = 0B00
ins7e11 = 15
detect = cd
mhz = 534
cardmhz = 369
ident = 0B00:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
auprovid = 000B00
worked here for years
Hi
Also has a Estar800se it run perfectly, but I also had problems with flashing.
It is important to use the right version at DreamUp. Here works 1.3.3.4 and not others.
Likewise, the image you use be specifically Estar.
I have many images to it I can send if you need a it works?
No, it dont work, nobody can solve it :(
Insert boxkey/number?
Any solution or progress?
The SD box I have picture on a Pace DS250NV
Any solution or progress?
The SD box I have picture on a Pace DS250NV
What color is your card? I have same problem
It is also very mysterious, very.
It has worked for several years with no problems, but here I could not figure out.
I have not seen the thread where it got started again. Link?
I use just one SD box for my Viasat card and have the same problem.
It fails for me to get to work even if it was activated in it and worked in SD box :(
Well the site is up again, nice :)
Unfortunately, there is nothing new here, you ever message:
user1 (093E & 000000 / 01xx / 07xx / AA: xxxxxxx2CB7ACA0F42A7557DDD353F2E): not found (43 ms) by Viasat
xxxxx158 s Viasat [***********] classD3 ins54: no cw -> Card is paired
When the card is in the server. There is a fine picture in a SD box?
Have you tried updating your card in sd-tuner?
Thinking of solution where you call automatic telephone answering.
Do not think it is correct with 86 Entitlements??for sd!
I have the full package and 78 Entitlements...
Hello and thank you.
Yes the card is in SD tuner now, here it works perfectly. It has been sitting in some days.
I do not know if the number of Entitlements is correct. The number changes actually a little now and then ..
@ nice
With a blue card? and many thanks, I'll just try sometime.
- - - Updated - - -
Display MoreHello and thank you.
Yes the card is in SD tuner now, here it works perfectly. It has been sitting in some days.
I do not know if the number of Entitlements is correct. The number changes actually a little now and then ..
@ nice
With a blue card? and many thanks, I'll just try sometime.
@ nice
I tried, it does not work. The card will not start.
I am told the card is paired with the old setup has worked?
Any idea?
81 Entitlements for Viasat is correkt
Hello again
Now I have moved the card from my Raspberry an old DM500 who have run it before.
Now there are 86 Entitlements for Viasat but my DM800 clears ever not.
Bokskey fit the SD box. Card works fine in SD boks and have a picture on, but immediately it comes in DM500 open channels not.
Unfortunately writes Oscam in the log:
user1 (093E & 000000 / 01xx / 07xx / AA: xxxxxxx2CB7ACA0F42A7557DDD353F2E): not found (43 ms) by Viasat
xxxxx158 s Viasat [***********] classD3 ins54: no cw -> Card is paired
oscam.server
[reader]
label = Viasat
enable = 1
protocol = internalize
device = / dev / sci0
caid = 093E
boxid = xxxxxxx
ins7e11 = 15
Detect = CD
mhz = 534
@ Hacked
Hello again
So, I've had time to look at it.
Yes, I'm sure boxkey is correct, it has worked long and I tried another and was told it was not correct.
I borrowed a map of a partner, it also works in a SD box with no Oscam server.
Again, I am sure boxkey is correkt. Oscam V9475
28/01/2015 18:25:22 4Bxxx8 s Viasat [smart reader] Error activating card.
28/01/2015 18:25:22 4Bxxx8 s Viasat [smart reader] init card to 369 mhz
28/01/2015 18:25:29 4Bxxx8 s Viasat [smart reader] Error activating card.
28/01/2015 18:25:29 4Bxxx8 s Viasat [smart reader] init card to 369 mhz
28/01/2015 18:25:36 4Bxxx8 s Viasat [smart reader] Error activating card.
28/01/2015 18:25:37 4Bxxx8 s Viasat [smart reader] THIS WAS A FAILED START Attempt No. 1 out of max alloted of 1
28/01/2015 18:25:37 4Bxxx8 s Viasat [smart reader] card initializing error
28/01/2015 18:25:37 0 s init for all local cards donated
28/01/2015 18:25:37 0 s anti cascading disabled
Do you watch TV from the DM7020HD V2 or must share with others?
If it's the one you should see, I do not think you get started CCcam, select it from cam`s under "blue button" menu.
Otherwise, try another version, or even better with Oscam
I have almost the same problem, but here came the card not to work after it came in a SD box again. There is a picture on the SD box, but Oscam write channel is not open.
Viasat [***********] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
XXXXXX c XXX (093E&000000/009D/0460/AA:XXXXXXXXXXX535C1CEE314DXXXXXC4E): not found (75 ms) by Viasat
Do you picture when the card is in the original box?
Is it active?
What say CCcam when you look at 192.168.x.xxx:16001?
More says you should stay away from v 2.3
I agree, OScam works much better, try it. Complete files to CD is here, I know they work because I have shared mine.
