Have Yourself a E-Star box, and flashed others to 84 before
Why not make it as the first and thus avoid CA Error?
and therefore content to copy the drivers to finish
How do I find out sim version in my box?
Have Yourself a E-Star box, and flashed others to 84 before
Why not make it as the first and thus avoid CA Error?
and therefore content to copy the drivers to finish
How do I find out sim version in my box?
Yes, see if it works, My writing CARDOK
(no entitlements) when the date has passed, but oscam opens the channels anyway.
You can see readers about your client writing to the card.
oscam server
[reader]
label =xxx
protocol = smartreader
device = 001:004
caid = 0B00
ins7e11 = 15
detect = cd
mhz = 534
cardmhz = 369
ident = 0B00:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
# blockemm-u = 1
blockemm-g = 1
auprovid = 000B00
oscam user
[account]
user = xxx
pwd = xxx
keepalive = 0
au = 1
group = 1
Works on RasPi here
Cliens 192.168.x.x port xxx xxx { 0:0:1 }
This will not stop your box being paired lol all your going to do with that is run logged emm to check what you are writing to the card , once you are paired thats it IMO its of no use
No, actually it was not what I was thinking. I thought it might be a tool to help find a solution to the "new pairing"
But I took that error, I understand.
But it would be nice
I listen intently with here, but the name suggests well it is a tool that can help to break the "new pairing" but can we as ordinary users of this site to help in any way, may I ask for more instruction
Hello
I ran as a client on a 3G connection, through both a phone and a 3G router. Both worked perfectly, but it requires the connection is solid rock.
Try protocol = smartreader
I use to read a usb reader with my Raspi
and I think I had the same problem until I hit the right protocol
Now I have opened for U, but it has been running for more than 1 year who come EMM`s S and then.
It says NO entitlements in CARDOK but cleat all anyway
Have an idea about the other possible? Opening for paired HD channels by switching an active card from an original box to another, without putting in box number 2?
Thanks.
One of my cards function AU
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
and write no ENTITLMENT, but it works so Even so,?
I was wondering if one could be done to open the paired channels by taking an active card, code it to another box, but then put it in a oscam server instead, so it does not pair with the new box, but opens channels?
Hello
I've got a little Oscam to work, also with the AU. Is there someone who can explain what is the difference between different EEM`s?
EMM u: Unique? and what does it mean? A emm sent to one current card, and why?
EMM g: Global? and what does it mean?
Can Oscam OPEN an inactive card to clear canals, and with what EMM`s settings?
I downloads
Samba Mount 3.0.20
and
Samba Server 3.0.20
from Gemini-Server in the Blue menu, but nothing happens when I can not get in and create a setup.
Hello and thank you very much.
I want direct access from the network, so it is a Samba server I have to work with.
I have a wired LAN neværk in the house and all PCs running Win7
But I need Samba?
Hello
I have had my box to store recordings on a shared network drive. That way I could see the recorded files to other devices on the network.
However I could not put HD channels on pause, or record, so now I have put a hard drive in my DM800 clone. It works perfectly, but how can I mount the hard drive so I can see it from the network and access the files on the hard drive?
Figured it out and the box is up, I was suprised that none of the DM gurus here were able to help.
Hey, now I see it's an old thread. I have the same problem with a DM500HD and wonder also not someone who knows what to do.
But it surprised me too you have not described what you did to get the box up again?
I have tried on the LAN, but the dream box will not reach far reaching that it takes up an IP from the router.
There will be no update screen when I hold the button and turn on the box. So the green diode and nothing happens
If I put the power on without holding the button turns red.
If I press the button flashes to green and back to red.
I do not know what it is for a bootloader and I picked up just rot that was linked to here, but I do not understand the bootloader properly.
Again, I can get in touch with DreamUp, but it ends with:
upload completed, waiting for acknowledge
so it ends.
I've tried with optiflash that I can choose the boot loader, but it goes into a loop and will not finish, so I can get to flash the image.
Hello again.
Now I kontake box with DreamUp, but it does not extend beyond:
upload completed, waiting for acknowledge
OptiFlash says Bootloader and second stage ok,
Some suggestions?
Now I have downloaded the latest version of OptiFlash, and hope a kind soul will link to a boot loader for an original DM500HD I can not clean out what it is for, I efforts shall try.
I try to donate to get a key and full version, but in the end I end up on a website with no progress.
I certainly thought it could be the one that was the problem, but even though I've read some here and made many other boxes to work, I can not figure it out with bootloader and in what order to do it?
#1 First flash the bootloader, then put new image on?
#2 But again, can not figure out the bootloader manual?
When I start DreamUp I get often told, can not find com ports, aborting.
By DM500HD I use a USB port, with clones a USB to Serial converter, it is often better.
#3 Is there someone who has a solution to the USB problem also?
Hi
My brother's original DM500HD was discontinued without being shut down properly.
Since then it has not been able to start again.
When the power is switched on the LED is red and there is den.Ved pressure "Merely switching" flashes to green and returns to red.
It can not be contacted on the network and will have no IP router.
I can not contact it with the USB cable, but DreamUp and Optiflash get contact but then there will be no more.
Where do I start?