I have a nc+ card .
I set it in oscam and when i test it in cccam or mgcamd everythings work ok.
But when i use in server every 5 min oscam give me not found or rejected group.
And after 10 sec back ok.
I have dm800se .
I had cyfra card last year and it worked ok without problem.
I tested new card with mhz 900 and 630 and auto but same.
I test oscam 12111 .
فرستاده شده از HTC One_M8ِ من با Tapatalk
Show us your configs and an oscam log when it freezes.
thanks for your answer .
oscam.server
QuoteDisplay More# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11212
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt
[reader]
label = NC+
protocol = internal
device = /dev/sci0
services = nc+,no_sid
autospeed = 0
fallback_percaid = 0100:000068
caid = 0100
ecmwhitelist = 0100@000068:64
ecmheaderwhitelist = 0100@000068:803061006800075C00,813061006800075C00
detect = cd
mhz = 900
cardmhz = 2700
ident = 0100:000000,000068,000065
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-10,11-20,21-30,31-40,41-50,51-60,61-70
lb_weight = 100
blocknano = all
audisabled = 1
oscam.services
QuoteDisplay More# oscam.services generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11212
# Read more: http://www.streamboard.tv/svn/…oc/txt/oscam.services.txt
[nc+]
caid = 0100
provid = 000068,000065
srvid =
[no_sid]
caid = 0100
provid = 000068,000065
srvid = 01D4,01D5,01A3,0131,013A,012F,012E,01C5,01C7
oscam.conf
QuoteDisplay More# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt
[global]
logfile = stdout
unlockparental = 1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
lb_mode = 1
[cache]
[newcamd]
port = ****@0100:000000,000068,000065
allowed = 127.0.0.1,***********
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[webif]
httpport = *****
httpuser = oscam
httppwd = oscam
httptpl = /var/etc/picon/
httprefresh = 10
httpallowed = 192.168.1.1-192.168.1.255
hideclient_to = 15
- - - Updated - - -
can anybody help ?
Here are my configs (from ubuntu server though) which work well for me.
QuoteDisplay More[reader]
label = nc
protocol = pcsc
device = 1
caid = 0100
detect = cd
mhz = 450
cardmhz = 450
ident = 0100:000068
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
saveemm-s = 1
saveemm-g = 1
disablecrccws = 1
auprovid = 000100
QuoteDisplay More[global]
serverip = 192.168.1.105
logfile = /var/log/oscam.log
nice = -1
waitforcards = 1
lb_mode = 1
[cache]
[newcamd]
port = xxxx@0100:000068
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = xxxxxx
nodeid = xxxxxxxxxxxxxx
version = 2.1.3
reshare = 1
[webif]
httpport =
httpuser =
httppwd =
httprefresh = 15
httpshowuserinfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.1.1-192.168.1.254
This is most likely because you either do not have a full subscription or your server is sending faulty ECM (very often seen on misconfigured MCS,CSP).
Ok.why I have freeze in my dm ?why when many ecms request i have no picture for 10 sec and after it all ok and again after 3 or 5 min.
فرستاده شده از HTC One_M8ِ من با Tapatalk
Your card is 0100? => SID Limit like CSAT France and other V10 Cards.
Yes my card is 0100 .
But with last card i had no problem.with new card i have problem.
Last card was cyfra but no full.new card is nc+ ful
فرستاده شده از HTC One_M8ِ من با Tapatalk
Can anticas help me ?
Or limit emcs ?
فرستاده شده از HTC One_M8ِ من با Tapatalk
Try oscam sidlimit to 4 sid, if it still does not work try limiting to 2 sid.
Don’t have an account yet? Register yourself now and be a part of our community!
