Can't not for the life of me get My wetek and Oscam and cccam working

There are 11 replies in this Thread which was already clicked 1,703 times. The last Post () by cazuela.

    Any help would be appreciated. I have setup everything i think. In the Oscam web it tells me my c line is connected, but in the live log it's saying = reading key file: /sdcard/config/SoftCam.Key? Im getting scrambled channel.

    you may need to post configs , one thing i have seen missed on most folks Cccam is where you put in user name in password there is a box that says want emu ensure this is ticked ;)


    also you may with tpo say what caid your using ect ect

    PM for support 0nly with a Link to Y0ur
    P05t w1Th Wat5 up 0r 155u3 thaT5
    B33N ....... P05T3D


    0D3R PATCH3D 3H ;)
    much <3 th0ugh in d0 a5 Ab0v3
    1n Wh3n 533N r3plY n PM n 58PP0rt G1v3n ;)



    "I'm against Piracey so please DONT ATTACK SHIPS"
    :p

    I am really new to oscam so I don't know what a caid is where to find them. What info do I need to post about my configs?


    - - - Updated - - -


    In my live log it is saying reading key file: /sdcard/config/SoftCam.Key.


    - - - Updated - - -


    2016/03/31 15:21:59 4FDCDEF7 r (reader) emulator [emu] card detected
    2016/03/31 15:22:00 4FDCDEF7 r (reader) emulator [emu] found card system emu
    2016/03/31 15:22:00 4FDCDEF7 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2016/03/31 15:22:00 4FDCDEF7 r reading key file: /sdcard/config/SoftCam.Key

    Caid is identifier number eg sky uk caid 0963 , sky italy 093b, canalsat 0500. If you want to post copies of your config files make sure you change your user and password and server details in the files you post . What are you using as operating system is it E2 image, TV headend, Wetek theatre etc as the files go in different locations in each image. The only files I normally change are oscam reader/server, oscam user, dvbapi config and oscam config. Lately I have been editing my srvid files and services files as well.

    hi I got it working , really happy ,but now it keeps freezing every 5 seconds,showing pic but then saying scramble channel. I got 3 c lines running is this the problem?

    Have a look in oscam webif live log while watching glitching channels make a note of what it says when glitching occurs.


    If you have three different C lines to different servers - all supplying the same card.
    This can cause problems. Test and find with which line you have the better performance. It can be easily done by connecting one line and watch channels for a while and see which one gives less cutting or freezing


    You are receiving the same card on hop1 & hop2 etc..
    If it is the different servers use the one with better response time(sometime hop2 card have beter response than hop1). Try to use the channelinfo, prio and providers files to configure


    The server is overloaded at the other end
    An overloaded hop1 server can cause your file to connect to a Hop2 instead - but then keeps trying to get back on the hop1.

    Quote

    The server is overloaded at the other end
    An overloaded hop1 server can cause your file to connect to a Hop2 instead - but then keeps trying to get back on the hop1.


    This is very typical service from a payserver so before we jump to any false conclusions, Please read the site rules regarding such activities...

    I'm getting this message from my live log =no suitable readers found that can be used for decoding! (then I get) found (25 ms) by wetek (P/2/2/2) - Cartoon Netwrk
    2016/04/01 09:43:43 22C36928 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0904 length: 20)
    2016/04/01 09:43:43 22C36928 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 0903 length: 32)
    2016/04/01 09:43:43 22C36928 c (dvbapi) Demuxer 0 stream Videostream (MPEG-2)(type: 02 pid: 0901 length: 26)
    2016/04/01 09:43:43 22C36928 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 0902 length: 32)
    2016/04/01 09:43:43 22C36928 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
    2016/04/01 09:43:43 22C36928 c (dvbapi) Demuxer 0 serving srvid C418 (Cartoon Netwrk) on adapter 0000 camask 0001 index 0000 pmtpid 0000 . still not sure what's up?

    Quote from unorthodoxteks

    So sorry for talking about the untalkable on this site Is there anywhere I can get some help other than here. Thanks in advance


    There is no problem with talking about setups,,, but in this case,like many before, the problem lies with the server not the client.
    Get yourself a legit subscription on any "shareable" platform that you´d be interested in which opens new paths to follow...
    I am not for one minute recommending cardsharing, I am merely suggesting it as a possible/obvious solution to your viewing problem.

    Quote

    Sorry Cazuela my bad


    Not at all buddy!!
    You´re simply trying to help out,,but experience tells me how the thread was going and leading to.....

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login