How to watch powervu on enigma ii [detail tut]

There are 6 replies in this Thread which was already clicked 12,698 times. The last Post () by master G.

    Hi guys….
    In this tutorial am going to explain how to use Powervu with dreambox without stream relay
    For those who don’t have dreambox, you will have to activate stream relay to make it work, without stream relay is only for dreamboxes.
    I quote highly esteemed Joeuser >>


    >> people have confirmed working on VU+ images with stream relay.
    Tested on Dreambox 800se clone with Openpli 4, I believe any image should work, but go with PLi most people are using that
    I tested the two satellites NSS 7 at 20.0°W>> MTN Worldwide TV and Eutelsat 7 West A at 7.3°W >> BW TV


    1. You can flash your dreambox with the current image
    2. Scan your channels you watch to watch
    Always change the satellite.xml to make a good scan,The file is found in /etc/tuxbox/ but for Openpli its found in /etc/enigma2/ >> Satellitite.xml file can be downloaded here satellite.xml
    3. Install your oscam-emu, but first of all install oscam from openpli feeds and replace the bin file,Or simply download the oscam emu with configs
    Bin file is named “oscam” place in /usr/bin/ right click the file and change permission to 755 and config files goes to /etc/tuxbox/config/oscam/
    Softcam goes into /usr/keys/


    f5ab8ba992fefd0d72f91015.gif

    Now your oscam should be working,You can restart it from the softcam panel


    efe61f7460640bc785.gif


    Since oscam is showing on the softcam panel means oscam is installed successfully,if you have more than one cams installed,you need to choose oscam
    4. Now you need to edit the softcam.key
    for BWTV >> its like this


    The 1F86 is the SVID of the channel, you can get from your dreambox, from the info menu


    fc6097478c7906afd12.jpg


    That’s the same as the SID, its already in HEX format because dreambox already converts
    it for you

    Quote

    P 1F86 00 3581B4C2D46026 ;7W 11595
    P 1F86 01 CB5D29AF09277A ;7W 11595


    Change the 3581B4C2D46026 and CB5D29AF09277A to the working key and 7W to the angle of channel and 11595 to the frequency of the channel

    Code
    P 1F86 00178834 5760007a539b45 ;EMM Key
P 1F86 00194247 3d3aada52de025 ;EMM Key
P 1F86 001b41a5 3ba5fb3aba8eae ;EMM Key
P 1F86 001b6590 00220e31f919bc ;EMM Key
P 1F86 001c1b89 d5eea7e0081d86 ;EMM Key
P 1F86 001c61c6 8a8014a4a03f5f ;EMM Key
P 1F86 001d1f60 fceed617ce0e05 ;EMM Key
P 1F86 001d24b5 12fc7c504f6062 ;EMM Key
P 1F86 001d2f8c eb8125e02add8e ;EMM Key


    The rest are emm key for autoroll to work, all congis will be attached, everything configured out
    Most providers are not sending emm key again so you need to be on channel when emm is send to get autoroll working
    Others too have blacklisted public posted working emm, especially sports24….so u need to search for valid emm key to get it working
    >> As I said before those without dreambox need to enable streamrelay


    Change to one, or follow this tutorial >> HERE


    softcam key details for both satellite >>


    Very important, after changing keys, remember to restart oscam from panel or picture will not show
    My oscam-emu and configs FILES1,FILES2 AND FILE3


    ABOUT AUTOROLL
    - The oscam.conf is setup to autoroll with emm keys in the softcam. Key
    you need to look for the valid emm key,BWTV only send the EMM stream for a very short time each day.And until they send while watching the key will not update


    Type in browser to assess oscam webif

    PHP
    The ip_of_your_dreambox:16402


    for you to know autoroll will work,You should see something like this in oscam live log
    (reader) emulator [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND
    Relax, this means oscam is ready to receive the EMM for the UA listed in your emm key line in softcam


    For those on VU+ should watch this video on how to use stream relay >> WATCH VIDEO



    thanks for reading,hope it clears so many doubts
    press the thanks bottom if this tut helped you


    esuo2

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login