Hallo need same help How to Convert OSCAM lines to CWS line mgcamd? is it possible ?
How to Convert OSCAM lines to MGCAMD?
-
- Mgcamd To OSCam
- Srbin75
- Thread is marked as Resolved.
-
-
Which protocol are the readers/lines in OSCam, newcamd or CCcam ?
-
Its Newcamd
-
In OSCam an example reader would be like this:
[reader]
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=some.hostname.org,10001
user=linuxsat
password=support
group=1
lb_weight=100In MGCamd it would look like this:
CWS = some.hostname.org 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
-
I hew 7 reader on my OSCAM SERVER on 7 different port . How to make on 1 CWS port ( exemple 34300 ) to go out ?
-
I`m not sure what you are asking here, but to add more OSCam readers to MGCamd you add CWS_MULTIPUL = instead of CWS =
For example:
CWS = some.hostname.org 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_MULTIPUL = some.hostname.org 10001 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_MULTIPUL = some.hostname.org 10001 linuxsat2 support2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_MULTIPUL = some.hostname.org 10001 linuxsat3 support3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -
he'd like to go all through a single line exemple 34300 . exemple
CWS = some.hostname.org 34300 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
but for all 7 Reader .
7 different cards on 7 diferent port . this is my exchenge server also. -
All of your OSCam readers/lines would need reshare to be able to do that.
You setup an account in oscam.user:[account]
user = linuxsat
pwd = supportYou need the [newcamd] parameter in oscam.conf, with the port you want to use:
[newcamd]
port = 34300
key = 0102030405060708091011121314Use this in MGCamd (change some.hostname.org to the servers ip address if you are using this on your own network):
CWS = some.hostname.org 34300 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
-
[newcamd]
port = 12544@0500:051700;15444@0629:000000;15450@1880:000000,002011,002111,002113;15500@0500:030a00,030a10,030a20,030a30,030a40
key = 0102030405060708091011121314How all this to let you through this port : 34300 ??????
-
How you have [newcamd] setup is for local cards.. Why do you have that if you are only using proxy readers ?
-
i make exchenge whit tihis server . N for N .
Now I would like to watch over him whit CWS linie . NO CCccam linie . -
You don`t add the proxy reader/N lines port and caid to [newcamd], only add the [reader], nothing else.
Remove this:
port = 12544@0500:051700;15444@0629:000000;15450@1880:000 000,002011,002111,002113;15500@0500:030a00,030a10, 030a20,030a30,030a40And add this:
port = 34300Add the [account] like how i showed you in post #8.
-
Super thxxxx
-
Does not work.
This is how I put :
port = 34300@0500:051700;0629:000000;1880:000 000,002011,002111,002113;0500:030a00,030a10,030a20 ,030a30,030a40
works only : 0500:51700if you go on like this:
port = 34300@0629:000000;0500:051700;1880:000 000,002011,002111,002113;0500:030a00,030a10,030a20 ,030a30,030a40
works only 0629:000000
always doing only the first profile . Why ? -
Try with only the port:
[newcamd]
port = 34300
key = 0102030405060708091011121314 -
not and will not . not at all
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!