BT Home Hub 5 ChromeCast Audio Static I.P.

There are 22 replies in this Thread which was already clicked 5,317 times. The last Post () by toothfairy.

  • I have just purchased a ChromeCast Audio and I'm trying to assign it with a Static I.P, I am now sure this is not possible after posting on Google Cast Help Forum.
    However I followed the instructions posted by a member shown below in Red.


    I have a Chromecast Audio (CCA) which I use with a HH5 in which I have assigned a static IP Address.
    Assuming your CCA is up and running, go to the "Advanced Settings" page of the Home Hub admin, then click "Home Network". This will show you all the devices (wired and wireless), connected to your router.
    You should see your CCA there, together with the IP Address assigned to it.
    Click the name of the CCA.
    Type the IP address you want to use in the appropriate box, then click "yes", where it says "Always use this IP Address".
    Click "Apply", and you should be good to go. If you look at the "Home Network" page now, it should show the CCA as having the IP Address that you want.


    However when it comes to the "Type the I.P. address you want"
    It wont let me......The only difference between the settings from the guy who posted the very helpful reply above and mine is he has DHCP Server enabled and I don't.
    Now here comes my question.
    Would it mess my HH5 Router settings up i.e. port forward, static I.P's if I enabled DHCP temporarily to see if I can then input an I.P. of my choce.


    Sorry for the long winded question.


    Thanks in advance.

  • but by clicking 'Always use this IP address' yes thats it with a static ip you just use that ip for what ever purpose you need..


    can i ask what you are trying to do by picking the ip?


    when device is connected just click use ip yes and thats it

  • if you have picked your own ip addy for it have you picked the right sub net as well?
    it would be easier to en enable dhcp and disable static ip on the chrome cast then reboot the chromecast let it find an ip and set it static

    110cm Triax Dish multi arm 13,16,19, 23, 28 east fixed 90cm thor

  • Easy solution would be to buy a decent router, the hh5 is piss poor tbh but people still insist they use them and laughably defend them.
    There are far better uncrippled devices out there that dont cost a fortune and will let you set things up the way you want.

    110cm Triax Dish multi arm 13,16,19, 23, 28 east fixed 90cm thor

  • Easy solution would be to buy a decent router, the hh5 is piss poor tbh but people still insist they use them and laughably defend them.
    There are far better uncrippled devices out there that dont cost a fortune and will let you set things up the way you want.


    Can you recommend me a replacement for the HH5 ?


    Thank you.

  • Quote

    You would have to seek out a combined VDSL/Router combination to use


    Just to clear things up infinity doesnt use vdsl it uses PPPoE


    I built my own router using http://www.ipfire.org/ which means i can set zones and limit who and what has access and i have a netgear night hawk x6 as an access point but the only reason i got it was a good black Friday offer, pick a router that is dd-wrt compatible http://www.dd-wrt.com/wiki/index.php/Supported_Devices so if you aren't happy with the stock firmware you always have a choice to change. Personally i would avoid a router/modem combi but thats your choice.

    110cm Triax Dish multi arm 13,16,19, 23, 28 east fixed 90cm thor

    Edited once, last by multipack: adding quote ().

Chat about everything else!

A friendly forum for off-topic discussions, random questions, and community bonding. Your space for conversations outside our main categories. Discuss hobbies, news, games, or anything else with the wider community.