Problem with Smargo reader (oscam ubuntu)

brakim123 · Jun 17th 2016

Hi,

I'm currently trying to set up my new server and i cant get my smargo-reader to work.

This is my environment (virtual machine)
Linux cardserver 3.19.0-25-generic #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
OSCam: 1.20-unstable_svn Build: r11209 Compiler: x86_64-linux-gnu
Smargoreader (the blue one, and i thinks it is clone version)

Everything worked fine on my other server but i guess the big difference between them was that my older server was debian and ran a lot older version of OSCam.

My problem is this.
(reader) smargo [smartreader] Error activating card.
(reader) smargo [smartreader] usb bulk write failed : ret = -7
(reader) smargo [smartreader] card initializing error

I have tried some different reader settings i cant get it to work.

My current settings:

Code

[reader]
label                          = smargo
description                 = smargo
protocol                     = smartreader
device                       = 002:002
caid                           = 0B00
detect                       = cd
mhz                          = 343
cardmhz                    = 369
ident                         = 0B00:000000
group                        = 1
emmcache                = 1,1,2,0

Display More

lsusb -v

Code

Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0403 Future Technology Devices International, Ltd
  idProduct          0x6001 FT232 USB-Serial (UART) IC
  bcdDevice            4.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 USB smartcard server
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 01 01
      ** UNRECOGNIZED:  04 24 02 07
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)

Display More

**master G** · Jun 17th 2016

Try removing britty:

Code

apt-get remove brltty

Try changing the device info.. Type these lines in telnet:

Code

lsusb -v | grep iSerial

You should get something like this:

Code

iSerial 3 Reader 1

Add this in oscam.server:

Code

device = Serial:Reader 1

Try using a different version of OSCam.. Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild

brakim123 · Jun 17th 2016

Quote from master G
Try removing britty:
Code
apt-get remove brltty
Try changing the device info.. Type these lines in telnet:
Code
lsusb -v | grep iSerial
You should get something like this:
Code
iSerial 3 Reader 1
Add this in oscam.server:
Code
device = Serial:Reader 1
Try using a different version of OSCam.. Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild
Display More

Hi, i don't have brltty installed, double checked.

lsusb only gives me

Code

iProduct                0 
  iSerial                 0

I haven't tried a different version of OSCam, do you have any recommendations or should i just update to latest?

**master G** · Jun 17th 2016

Just update to the latest OSCam..

Try updating the firmware on the smargoas well..

brakim123 · Jun 17th 2016

Quote from master G

Just update to the latest OSCam..

Try updating the firmware on the smargo..

I tried it yesterday but i couldn't get the software for windows to work, my reader showed up but when i tried to update the program freezes and crashed.

I just made a new build of the latest OSCam and changed back my OSCam server settings to this.

Code

[reader]label                         = smargo
description                   = ComHem
protocol                      = smargo
device                        = /dev/ttyUSB0
caid                          = 0B00
detect                        = cd
mhz                           = 343
cardmhz                       = 369
ident                         = 0B00:000000
group                         = 1
emmcache                      = 1,1,2,0

Display More

Now i get the following in my log

Code

2016/06/17 12:10:45 3B1B2EE6 r   (reader) smargo [smargo] Buffers readed  0 bytes total time_us 75125
2016/06/17 12:10:45 3B1B2EE6 r   (reader) smargo [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2016/06/17 12:10:46 3B1B2EE6 r   (reader) smargo [smargo] card detected
2016/06/17 12:10:54 3B1B2EE6 r   (reader) smargo [smargo] Error activating card.
2016/06/17 12:11:11 3B1B2EE6 r   (reader) smargo [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/06/17 12:11:11 3B1B2EE6 r   (reader) smargo [smargo] card initializing error

Problem with Smargo reader (oscam ubuntu)

Participate now!

Share

Tags