Debian 6 oscam server with omnikey reader and pscs driver help

Hi
Hope somebody can help a noob in distress
Just installed debian 6 then oscam with pcsc
I want to connect to clients
I have an omnikey and webui works ok
From what I have read I have to set up a cccam protocol in oscam.conf, an omnikey reder in oscam.server and an account for client in oscam.user

The server dosent connect to clients and doesnt seem to see the reader

my conf file

nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
saveinithistory = 1
PreferLocalCards = 1

[webif]
httpport = 8888
httpuser = oscam
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.2-192.168.1.255

[cccam]
port = 12000
reshare = 2
version = 2.2.1

oscam.server
[reader]
label = omnikey
Protocol = pcsc
detect = CD
device = 0
EMMCache = 1,3,2
CAID = 0963
ident = 0963:000000
emmcache = 1,3,2
group = 1
caid = 0963
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 101

oscam.user
[account]
user = user
pwd = pass
group = 1
uniq = 1
au = omnikey
keepalive = 1

from webui oscam status
2012/02/09 21:41:17 9E791D0 r Cannot open device: 0
2012/02/09 21:42:17 9E791D0 r PCSC failed establish context (8010001d)
2012/02/09 21:42:17 9E791D0 r Cannot open device:

I scanned the ports in webui and omnikey is reconised

Ive reinstalled differnt builds of oscam and also tried it along with cccam isntalled
I know Im doing something wrong (or NOT doing something right)
But been at it for 4 days and need a helping hand from someone more experienced in these matters

Please help before I give up and just stick to cccam:waaaht:

Hi
I tried that oscam version, 1.10 stable and the current one (1.20-unstable_svn Rev. 6364)
After setting up I compiled using

cd /usr/src
svn co http://streamboard.gmc.to/svn/oscam/tags/1.10 oscam
cd oscam
cmake -DWEBIF=1 -DPCSC=1
make

As you can see PCSC is included already
Do I need to install PCSC lite as well

One thing I dont understand is why I cant see clients logging onto server in webui
WEBUI users says they are offline, but I can ping the clients OK, and the cline in the cccam looks OK
oscam server IP 192.168.0.40

client c:line 192.168.0.40 12000 user pass yes

oscam.user
[account]
user = user
pwd = pass
group = 1
uniq = 1
au = omnikey
keepalive = 1

oscam.server
[reader]
label = omnikey
Protocol = pcsc
detect = CD
device = 0
EMMCache = 1,3,2
CAID = 0963
ident = 0963:000000
emmcache = 1,3,2
group = 1
caid = 0963
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 101

oscam.conf
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
saveinithistory = 1
PreferLocalCards = 1

[webif]
httpport = 8888
httpuser = oscam
httppwd = xlinkx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.255

[cccam]
port = 12000
reshare = 2
version = 2.2.1

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000

hi
I think I made progress
I installed pcsc as suggested by 10 below (thanks again) and the clients came on line. So Im guessing that pcsc (or similar) needs to be installed by linux as well as pcsc oscam drivers.
Now when I insert card I get this in webui status log
9:44:00 Bxxxxxxx0 c user (0963&000000/10CE/62:xxxC): rejected group (120 ms) (of 0 avail 0) (no matching reader)
9:44:09 Bxxxxxxx0 c user (0963&000000/10CE/62:xxxA): rejected group (120 ms) (of 0 avail 0) (no matching reader)

Both reader and user account are in same group (1)
Card works OK in other box so what can cause this?

Well I just sorted the problem, Im not a noob for nothing
The card was upside down in the reader :shame:

It was a new omnikey and Ive never used one before and I now know the chip side faces front of reader, not front side of card facing front of reader

Thanks again ten below, and al lthose who have helped me with their posts in the forum, I couldnt have done it without you