Posts by ezferret

Thanks MasterG
I just changed it and now working
I got the setup info using this diagram

90584.jpg

Ive been trying to connect 3 boxes (all vu duos running VIX images (one as server and 2 as clients) just using oscam. At the moment They run OK with oscam server and cccam as clients
The log in the client says there is no suitable readers found that can be used for decoding. Looking in the posts I cant see what Ive done wrong
Here are is the log and config files

2017/01/08 15:37:14 00000000 s (main) System name = Linux
2017/01/08 15:37:14 00000000 s (main) Host name = vuduo
2017/01/08 15:37:14 00000000 s (main) Release = 3.1.1
2017/01/08 15:37:14 00000000 s (main) Version = #1 SMP Sun Jul 6 12:47:51 BST 2014
2017/01/08 15:37:14 00000000 s (main) Machine = mips
2017/01/08 15:37:14 00000000 s (main) Stb model = dm500hd
2017/01/08 15:37:14 00000000 s (main) Stb vumodel = vuduo
2017/01/08 15:37:14 00000000 s (main) Stb boxtype = vuduo
2017/01/08 15:37:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 18012
2017/01/08 15:37:14 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/01/08 15:37:14 00000000 s (main) signal handling initialized
2017/01/08 15:37:14 00000000 s (reader) xxxxxxx [cs357x] creating thread for device xxxxxxxxxxxxxxxx
2017/01/08 15:37:14 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/01/08 15:37:14 00000000 s (main) waiting for local card init
2017/01/08 15:37:14 1DA5D9C9 p (reader) ixxxx [cs357x] proxy 192.168.1.71:25000
2017/01/08 15:37:14 1DA5D9C9 p (reader) ixxxx [cs357x] proxy initialized, server xxxxxxxxxxxxxxxxxxxxxx
2017/01/08 15:37:15 05ED731B h (webif) webif: decompressed 169348 bytes back into 417128 bytes
2017/01/08 15:37:15 05ED731B h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2017/01/08 15:37:15 00000000 s (main) init for all local cards done
2017/01/08 15:37:15 00000000 s (anticasc) anti cascading disabled
2017/01/08 15:37:15 5A1D2128 c (client) plain dvbapi-client granted (local, au=off)
2017/01/08 15:37:15 5A1D2128 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
2017/01/08 15:37:17 5A1D2128 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0963 ECM_PID: 051B PROVID: 000000
2017/01/08 15:37:17 5A1D2128 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 051B PROVID: 000000
2017/01/08 15:37:17 5A1D2128 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0960 ECM_PID: 051B PROVID: 000000
2017/01/08 15:37:17 5A1D2128 c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in caPMT
2017/01/08 15:37:17 5A1D2128 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/01/08 15:37:17 5A1D2128 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 051B ANY CHID PMTPID 0117 VPID 0209
2017/01/08 15:37:17 5A1D2128 c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in PMT
2017/01/08 15:37:17 1DA5D9C9 p (reader) xxxxxxxxxxxxxxx: resolved ip=xxxxxxxxxxxxxxx
2017/01/08 15:37:17 1DA5D9C9 p (reader) xxxxxxxxxx [cs357x] connecting to xxxxxxxxxxxxxxxxxx
2017/01/08 15:37:22 5A1D2128 c (ecm) local (0963@000000/FFFF/1135/71:282C225E2E91EA21810A95382C9561B5): timeout (5001 ms) by xxxxxxxxxx
2017/01/08 15:37:25 5A1D2128 c (ecm) local (0963@000000/FFFF/1135/71:F00AD9059ED8BD618262941CEC10DAEE): timeout (5001 ms) by xxxxxxxxxxxx
2017/01/08 15:37:25 5A1D2128 c (ecm) local (0963@000000/FFFF/1135/71:F00AD9059ED8BD618262941CEC10DAEE): not found (3033 ms) by xxxxxxxxxx
2017/01/08 15:37:26 5A1D2128 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2017/01/08 15:37:26 5A1D2128 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

=============================================================================
oscam.server (client)
[reader]
label = oscam (same as server label)
enable = 1
protocol = camd35
device = xxxxxxxxxxxxx 27000
account = username, password
caid = 0963
group = 1
emmcache = 1,3,2

oscam.conf (client)
[dvbapi]
enabled = 1
user = local

oscam.user (client)
[account]
user = local
group = 1

==========================================================

oscam.server (server)
[reader]
label = oscam (same as client label)
protocol = internal
device = /dev/sci0
caid = 0963
ecmwhitelist = 0963:3B,3E,42,41,42,44,45,47,4B,4E,4F,5F,50,53,54,56,5E,5F,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6F,7B,70,71,72,73,74,76,77,78,79,7A,7B,7C,7D,7E,80,82,84,85,88,89,8B,9A,B5,99
ecmnotfoundlimit = 5
detect = cd
mhz = 600
ident = 0963:000000
group = 1
emmcache = 1,1,2,0
disablecrccws = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 101

oscam.conf (server)
[global]
disablelog = 1
logfile = 0
clienttimeout = 5000
clientmaxidle = 180
maxlogsize = 300
block_same_ip = 0
block_same_name = 0
lb_mode = 0
lb_save = 100
lb_min_ecmcount = 3
lb_retrylimit = 800
lb_auto_betatunnel = 0

[dvbapi]
enabled = 1
au = 1
user = local
pmt_mode = 0

[cs357x]
port = 27000

oscam.user (server)
[account]
user = username
pwd = password
group = 1
cccmaxhops = 1
cccreshare = 1

Any help would be appreciated

That sounds like a good idea monkified.
What is a good alternative for the duo? I installed a campack for the blackhole image

Thanks fro the reply Satman
Here are the oscam configs

=========================================
OSCAM.CONF

[global]
disablelog = 1
maxlogsize = 1024
clienttimeout = 5000
clientmaxidle = 300
maxlogsize = 1000
netprio = 1
nice = -1
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_save = 100
lb_reopen_mode = 1
lb_min_ecmcount = 3
lb_retrylimit = 800
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[dvbapi]
enabled = 1
au = 1
user = local
pmt_mode = 0
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = xxxxxxx
httpuser = xxxxxxx
httppwd = xxxxxx
httpallowed = 127.0.0.1,192.168.1.2-192.168.1.253
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
hideclient_to = 0
httprefresh = 10
httppollrefresh = 10
http_status_log = 1

[newcamd]
port = 1xxxxxxx@0963:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1

[cccam]
port = xxxxxxx
nodeid =
version = 2.1.4
stealth = 1

=================================================================================
OSCAM.SERVER

[reader]
label = ice
protocol = internal
device = /dev/sci0
caid = 0963
ecmnotfoundlimit = 5
detect = cd
mhz = 600
ident = 0963:000000
group = 1
emmcache = 1,1,2,0
disablecrccws = 1
ecmwhitelist = 0963:3B,3E,42,41,42,44,45,47,49,4B,4E,4F,5F,50,53,54,56,5E,5F,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6F,7B,70,71,72,73,74,76,77,78,79,7A,7B,7C,7D,7E,80,82

================================================================================

OSCAM.USER

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10666
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.user.txt

[account]
user = local
au = 1
group = 1,2,3,4,5

[account]
user = kXXXXXXX
pwd = XXXXXX
group = 1
cccmaxhops = 1
cccreshare = 1

It is a vu duo running oscam 10666.
There are 10 accounts in oscam.user

If the log is showing that readout when the card first starts then there is a problem since the card had been on all day and it suddenly gave the readout half way through the footy match?

Ive been having some freezing problems with my oscam server
The picture freezes for about 25 seconds every hour or so
Very annoying so I monitored the log file and at about the same time it happened I got this printout in the logfile

2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] Card type: SYAV
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] Rom version: xxxx
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] Credit available on card: 35 euro
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] FuseByte: 25
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] Region Code: xxx
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] Country Code: xxx
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] classD1 ins742A: failed
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] Pincode read: xxxx
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] PCB settings: FF FF FF 0
2017/01/03 22:08:16 75C1D0F0 r (reader) ice [internal] type: VideoGuard BSkyB (0963), caid: 0963

AFAIK I don't have the card SYAV type, and have no credit with a Server and don't know what fusebyte or classD1 are

Ive edited out some info that might be sensitive (sorry if Ive posted this twice)

- - - Updated - - -

What does 75C1D0F0 mean?

- - - Updated - - -

What do these fields mean?
I looked on the oscam wiki but couldn't get any info about the log file set up

Quote from master G

Open the rc.local file which is in /etc. This should show you where the oscam binary is located.

Or search for it in telnet:

Code

find / -name oscam

Did you compile with webif support ?

I know where the binary is (/usr/local/bin) and can see it using flashfxp.
When I run it by going to the directory and typing ./oscam & I just see process is running but there is no screen output and I cant access oscam using webIF (Which was installed with binary)

- - - Updated - - -

Quote from joeuser

You can try

Code

netstat -antp |grep oscam

and see if it is listening for connections on port 8888 (or some other port if the default was changed in the conf) What is the logfile set to in oscam.conf? Maybe posting the oscam.conf file would be useful (removing and sensitive info).

here is oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.10rc-svn build #6089
# Read more: http://streamboard.gmc.to/svn/…on/doc/txt/oscam.conf.txt

[global]
serverip = 192.168.1.xx
logfile = /var/log/oscam.log
maxlogsize = 1024
# cachedelay = 120
nice = -1
preferlocalcards = 1
lb_mode = 1

[monitor]
hideclient_to = 15
# appendchaninfo = 1

[newcamd]
port = 1xxxxxx@0963:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1

[cccam]
port = xxxxxxxxxx
reshare = 2
version = 2.2.1

[webif]
httpport = 8888
httpuser = xxxxxxxxx
httppwd = xxxxxxxxxxxx
httprefresh = 10
httpallowed = 127.0.0.0,192.168.1.2-192.168.1.253

Ive just installed debian 8.6 and then compiled oscam using simplebuild (with pcsc)
I got the oscam binary Ok but not sure where to place it.
At the moment I put the binary in usr/local/bin (chmod 755 and renamed it oscam)
Config files (oscam.server, oscam.conf, oscam .user) are in usr/local/etc
When I try to run oscam ( using ./oscam & command) the file executes but I don't get any startup messages or anything. The PS command shows oscam is running but that's about all.
Also get nothing when I try webif.

[MENTION=3]master G[/MENTION] If I get a new sky +HD box with red card will I be able to get on demand from my duo?

What is the difference between the white and red cards? Will white card be OK in the vu duo or do I need a new red card?

At the moment I have a white sly card in a Thompson HD box Which I use in a vu duo oscam server. Sly have said the box will cease on dec 31st for technical reasons and they will swap the box for a sky + HD box. Can I still use the card from the new box? I thought this was not possible due to the new way of box pairing, but reading the forum I see there is a red card which might work.
Can anyone explain the difference between the red and white cards and whether I can get a new system set up when my box stops working.
Thanks for any help

[MENTION=72954]alimac[/MENTION] everything is working now. But I have to change box. I thought that card for the new sky boxes could only be used in original box.

I seem to be in same position as stones77
I have a Thompson box and a letter from sly saying I have to swap it for a hd + box
Will I be able to use the new card in my duo?
If so what do I need to do?

I fixed the problem.
The ip address had changed and hadn't been updated

same thing has happened to me

ive downloaded the script and tried to install on debian 8.6 (Jessie) on a i386 Athlon XP but it hangs. When I go to /emu/oscam to run oscam I get error "while loading shared libraries libssl.0.9.8 "no file or directory
Ive reinstalled debian with different options (ssl server, webserever etc but makes no difference.
please help

Thanks for that info.
Ive just got this box and there seems to mainly DE images for it
Can you suggest a better alternative?
I ve seen newenigma, TSimage and dreamboxUK
I also tried an openpli but had problems with it booting

- - - Updated - - -

Hi
Ive just installed a peter pan image (newnigma clone). Its installed autobouquets and crossepg is running and looks OK so far

Hi
Im just setting up a dm8000 with a dreamelite v3 image
I tried to install tspanel 7.5. It gave a few problems but I finally managed it by installing 6.6 and then updating.
When I try to open the add ons nothing happens. All the other options like devices and info etc appear to be OK
I have reinstalled and installed earlier versions but its the same
Any body got suggestions?
BTW crossepg is not working also maybe a connection?

Thankx for replies
I am waiting for the capacitor, but I think that the problem may be different cos it has the red light AND >starting... in the display which I am currently tying to figure out

Hi
I came home and found the display with a red light and starting>... screen instead of the usual standby clock.
I rebooted but no difference. After several days of trying to reflash box with images. cfe 3.0 bootloader, and using different usb sticks, Ive run out of ideas.
The box isn't reading the usb port, and using vutils or optiflasher doesn't do anything.
Reading around, I have been told that it could be
security key
capacity (c807?)
power supply

BTW I just realised what may have caused it may have been a power failure while I was out, does this make sense (but there were no relays tripped or anything to suggest this). It was running an openvix 3.0 image at the time

Does anyone have advice on this one, which is best way to check it out etc
any feedback appreciated

same thing happening to me, other channels missing also like living and sly1