anyone help me set up 2 boxes on same network as can only get 1 at a time to work is there router settings I need to change? or are the boxes conflicting please help been stuck for days now
please help 2 boxes
- fossway
- Thread is marked as Resolved.
-
-
Are they the same make/model.
Have they the same mac address.
If so, this thread may be helpful.
http://linuxsat-support.com/showthread.php/32309 -
Are they clones ?
Often clone have the same mac address, then you cant use 2 on the same network without changing mac address on one of them.....Try turning off the router and boxes, router on wait 5 min
box 1 on wait 5 min
try box 2report back your findings
EDIT codar beat me to it lol
-
in lounge I have new 4k solo bh and dining is vu duo 2 got the solo working then tried the duo but nothing switched solo off and duo started to work tried switching solo back on but cant get it working now even with duo off
-
In network configuration turn dhcp off on one of the receivers and set a different, static ip address..
-
I tried above switching off router and waiting 5 mins then switch on solo but still no line box says network fine any ideas
-
So both boxes are getting an internet connection ?
You just can`t get your line to work on the solo ?
Are you using the same line on both boxes ?
Which emulator are you using on the solo ? -
yes but only got solo on at mo. I had it working on solo before I tried to get duo on now cant get back on just upgraded to solo and got dvb-c vm line preferred mgcamd so downloaded bh image with mgcamd it worked then tried different line dvb-s on duo it didn't work I tried it with solo off it worked but now solo not even showing line tried re-flashing tried above but no joy
-
yes but only got solo on at mo. I had it working on solo before I tried to get duo on now cant get back on just upgraded to solo and got dvb-c vm line preferred mgcamd so downloaded bh image with mgcamd it worked then tried different line dvb-s on duo it didn't work I tried it with solo off it worked but now solo not even showing line tried re-flashing tried above but no joy
could be the server has set failban up so you´ll need to contact your peer to use two separate lines ( one unique for each box ) -
it was 2 lines one for cable and one for sat. Don't know what goes on it wont flash off usb now
-
-
back up and running with black hole 3.0.2 by master g only thing now is no picture on any server channels in blue panel it says source:net (newcamd at --------------) signature ok so connected but no picture could pull my hair out if I had any ha
Your support hub for the VU+ receiver.
Help, firmware and downloads for the VU+ Enigma2 satellite receiver. Ask about setup, channel lists, plugins and troubleshooting.
