hello guys i havce got a problem whith my vu+solo2 HW ERROR on led screen how to solve this problem expers answer (note box in original) not colone ok
HW ERROR on led screen
- aa7590
- Thread is marked as Resolved.
-
-
HW Error normally refers to a clone but if your sure it's original, I'd be contacting your supplier (if it's still under warranty)
You could try a couple of things first though, disconnect all hdd's, usb's etc from receiver and try to flash with original firmware.
Original images can be got from here:
http://linuxsat-support.com/sh…446-Open-Source-Image-3-0
or here:- - - Updated - - -
This thread may also be helpful finding out if it is a genuine receiver or clone:
http://linuxsat-support.com/showthread.php?t=42894 -
here r some pic tell this solo2 is ok or not
-
Looks ok from here (comparing pics to the thread I linked to earlier)
Have you tried with an original image? -
yes i tried but same problem i check and compaire my box with your given pdf file shows that box is orginal i am using box 3 years no problem but last saturday this problem appear
-
What image was previously running on the box before it developed this fault?
Did you online update it before your problem started.
I have read it happening to original solo2 , disconnecting it from the mains for a couple of seconds then powering back up may get it to boot.
You could also try bh 2.0.7 image to see if it will boot.
http://linuxsat-support.com/sh…ack-Hole-Vu-Solo2-v-2-0-7 -
ok thank you mr codar your given link for the image work for me and my vu+solo2 back again
-
You may have a clone so as that image is one that normally works for both clone and genuine receivers.
-
no man the pdf file u gave i check alll show original but thanks fo helping me i am using 3 years black hole images nothing go rong but i dont know why this happes i have geniune buying slip also
-
i have vu solo2 orginal box 3 years i am using black hole imagees all ok recently one day as i start my box i HR error on screen how to fix help urgent board all thig i check orginal box and i never use clone images ok
-
Have you tried re flashing your image?Maybe try with the original Vu plus image.I think I read somewhere that this solved it.
-
brother as i told before that i am using original image past 3 year with no problem and i also did official black home images on the box with no error works good but one day while watching channels i rstart y box and i get HW erroor on the led solo2 flash on the led a secend and then HW error appears help help urgnt experts of vu boxes i am waitng
-
it was suggested you flash the image again. you keep saying you are using the image.
Just try flashing original image again.Also try flashing most recent image.
Sent from my HTC One M9PLUS using Forum Fiend v1.3.3.
-
ok give the links for downloading i do on my box i tell you the results if i success then it will be for many vu solo2 those get the error mesage as i get
-
ok give the links for downloading i do on my box i tell you the results if i success then it will be for many vu solo2 those get the error mesage as i get
http://linuxsat-support.com/showthread.php/111259-VTi-9-0-3
I have seen a few posts on this, most of the time nand chip needs to be replaced. A serial log would help....
-
-
i did the image from your given link but still got same HW ERROR
-
hi do you have hdd internal or usb connected if yes remove it and try again to put new image
-
When i do image i never put hdd internal or any usb only i update the image with usb ever i remove the hdmi cable too before i do image
-
ok when you try to put new image and switch on wat message in front panel?
VU+ SOLO 2 PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!