Does NCam work as a server ?

master g, i have come across some configs, these are not mine.

[global]
disablelog = 1
logfile = /dev/tty
usrfileflag = 1
clienttimeout = 10000
unlockparental = 1
nice = -1
serialreadertimeout = 2000
maxlogsize = 100
waitforcards = 0
saveinithistory = 1
readerrestartseconds = 1
cacheexenablestats = 1
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 10
lb_min_ecmcount = 15
lb_max_ecmcount = 200
lb_reopen_seconds = 200
lb_nbest_percaid = 02:1
lb_savepath = 
lb_reopen_mode = 1
resolvegethostbyname = 1




[dvbapi]
enabled = 1
au = 1
writechannelcache = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = local
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox




[webif]
httpport = 8181
httpuser = root
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1




[reader]
label = server1
enable = 1
protocol = cccam
device = host,port
user = user
password = pass
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1




[reader]
label = server2
enable = 1
protocol = cccam
device = host,port
user = user
password = pass
group = 2
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1




[reader]
label = server3
enable = 1
protocol = cccam
device = host,port
user = user
password = pass
group = 3
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1




[reader]
label = Host
enable = 1
protocol = newcamd
device = host,port
key = 0102030405060708091011121314
user = user
password = pass
inactivitytimeout = 1
reconnecttimeout = 1
disableserverfilter = 1
fix9993 = 0
group = 4
lb_weight = 100

as you can see these files are much larger than the ones in my solo 4k, i want to use it as a server if possible but im not sure what to do ie do i open a port on my router plus do i need no-ip.com dns user. ive been looking at configs but not sure about ports and dns, so if i can will i be able to use it as server and add cline using the ncam converter. i am thinking that card reader 1 would be me with port and dns am i on the right lines. i connot find a guide how to set it up ive installed the ipk on the 4k obh 0.6. but going through the net for a guide all i could find was these configs paste/copy.

Quote from master G

NCam works exactly the same as OSCam, so yes it works as a server..

Use the configs from here -> Working NCam PowerVu Configs, it has all the unnecessary parameters removed..

Whether you use ncam, oscam or CCcam you must open the sharing ports in your router to allow a peers connection..

You also require a dynamic hostname from no-ip.com or which ever one you use..

Follow this guide -> Create C or N line and add new users in OSCam.. Only difference in this guide is oscam.conf is ncam.conf & oscam.user is ncam.user

If someone gives you a share, convert it with the NCam converter tool, then add the [reader] to oscam.server..

Display More

hello master g, thanks for the links i have tried everything to get this to connect with my friend. i have set it up like this.

config
[global]
logfile = /dev/null
nice = -1
lb_mode = 1
lb_save = 100
lb_reopen_mode = 1

[streamrelay]
stream_relay_enabled = 1

[cccam]
port = 15000
version = 2.1.3
build = 3165
reshare = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = localuser
extended_cw_api = 2

[webif]
httpport = 8181
httpuser =
httppwd =
httprefresh = 15
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

user
[account]
description = dvbapi
user = localuser
group = 1,2

[account]
description = master g help me ===== im not sure what goes here.
user = master g
pwd = linuxsat.net
group = 2
keepalive = 1

server
[reader]
label = emulator
protocol = emu
device = /usr/keys/SoftCam.Key
fallback = 1
detect = cd
group = 1
emmcache = 1,1,2,1

[reader]
label = master g
protocol = cccam
device = linuxsat help me,9000
user = master g
password = linuxsat.net
inactivitytimeout = 30
group = 2
cccversion = 2.1.3
cccmaxhops = 2
cccwantemu = 1
ccckeepalive = 1

thats how i have got it set up , ncam works for about 10 seconds then stop for about 30 minutes, i know my mate as a local and it will connect like i said i have no-ip set up and port forward set in my router, but it will not stay connected i have followed what you said the emu works ok it is my peer that does not any help please.

edit: all i get from his server "unknown" he as a local 68/68 cards when it works.

Quote from master G

You friend has given you a c line, as an example it looks like this:

C: my.friends.dns 9000 user password

Add this to ncam.server like so:

Code

[reader]
label = my friends server
protocol = cccam
device = [COLOR='#FF0000']my.friends.dns[/COLOR],[COLOR='#FFA500']9000[/COLOR]
user = [COLOR='#00FF00']user[/COLOR]
password = [COLOR='#00FF00']password[/COLOR]
group = 2

Creat an account in ncam.user for your friend:

Code

[account]
user = [COLOR='#00FF00']friend[/COLOR]
pwd = [COLOR='#00FF00']password[/COLOR]
group = 1,2
keepalive = 1

You now have a c line:

C: my.hostname.org 15000 friend password

Check port 15000 is open @ canyouseeme.org

Display More

thanks master g im all connected now with my mate still got black screen i dont think he as rebooted yet plus ive put in server my card reader like so

[reader]
label = freesat0
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101

can that be altered or is it ok it is connected.

hello radja sorry been out. my card is in the bottom slot and it is clearing motors tv on sky.

Quote from radja

Tell us which receiver you have and model?
Is it enigma 2 receiver?

Poslato sa Huawei P8 lite

[MENTION=16720]radja[/MENTION] sorry for late reply, my stb is a solo 4k.

- - - Updated - - -

Quote from master G

The reader is configured for the top slot..
Either insert the card in the top slot..
Or change this - device = /dev/sci0
To this - device = /dev/sci1
0 is top card reader. 1 is lower card reader.

thanks master g again sorry for late reply i now have my reader like so

[reader]
label = freesat
protocol = internal
device = /dev/sci1
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 2
emmcache = 1,3,15,0
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101

also what about ncam.srvid2 i have been looking for 1 but cannot find it, i have been reading that oscam srvid2 cannot be used. and ncam.dvbapi file are these needed like oscam.

Quote from master G

On the NavBar click "oscam" then "oscam config generator".

Download oscam.srvid & oscam.dvbapi for your card.

Rename oscam.srvid to ncam.srvid & oscam.dvbapi to ncam.dvbapi

@ master g thank you for pointing me to the navbar, i have ncam.srvid and ncam.dvbapi now installed do i need the following files.

ncam ccache
ncam.provid
ncam.services
ncam.srvid2

also do i need this
[account]
description = dvbapi
user = MASTER G
group = 1,2,3,4
keepalive = 1============= do i need to add this.

ncam is running on my solo 4k open blackhole 0.6 in flash.