Elite RedLight HD 10+

There are 12 replies in this Thread which was already clicked 5,913 times. The last Post () by wozbwfc.

    Hi all


    My box ect


    Vu+ duo
    BH 1.7.2
    Elite redlight hd 10+ viaccess 4.0


    Can someone who as got this card plaese post up there oscam settings and post what settings they have in oscam webinterface under reader / config so can double check all mine are correct ect. Cheers


    Woz

    wont viacces card work ok in CCcam ?

    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

    Card just won't clear channels won't to double check everything before I start with the suplior I'm work at press so looks like wife kicking ass tonight because I doing duo hehe I can't understand why not working my jsc card is ok !!!

    One thing to check,did you make any changes to your setup before the card stopped working???
    If you made a full backup when the card was working it might be worthwhile flashing it on just to doublecheck that the card is still not working .


    If you did install any add-ons etc try un-installing them and then try your card again,if the card has been working in your box can't see it being a problem with that,try taking the card out and giving the contacts a wipe. Worth a try.

    fI7WHhv.png


    Please click on the "Like" :thumbup: button if you find the information and support posted on the forum helpful.

    Not changed anything mckee or installed anything !!a give card a wipe. Last night and I put it in xcam and matrix cam to see if it worked but don't know if they viaccess 4 compatible . And if something is a miss in my configs ect the card won't AU date !!

    sorted it guys with this?


    jsc in the top slot & redlight in the bottom slot .

    /etc/tuxbox/config ( Enigma2 )

    oscam.conf

    [global]
    nice = -1
    WaitForCards = 1
    ClientTimeout = 5
    CacheDelay = 120
    logfile = std
    saveinithistory= 1

    [newcamd]
    Key = 0102030405060708091011121314
    Port = 15001@0500:042400,042410,fff920;15002@0500:043800
    keepalive = 1

    [webif]
    httpport = 18002
    httpuser = root
    httppwd = pass
    httprefresh = 10
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

    oscam.server

    [reader]
    label = JSC
    Protocol = internal
    detect = CD
    device = /dev/sci0
    mhz = 500
    cardmhz = 500
    Group = 1
    EMMCache = 1,3,2
    caid = 0500
    ident = 0500:042400,042410,fff920
    ecmwhitelist = 0500@042400:52,57;0500@042410:52,57;0500@FFF920:52,57


    [reader]
    Label = Redlight
    enable = 1
    Protocol = internal
    device = /dev/sci1
    Detect = CD
    Group = 1
    EMMCache = 1,3,2
    mhz = 500
    cardmhz = 500
    CAID = 0500
    ident = 0500:043800

    oscam.user

    [account]
    user = test1
    pwd = test2
    group = 1
    AU = JSC
    caid = 0500
    ident = 0500:042400,042410,fff920

    [account]
    user = test3
    pwd = test4
    group = 1
    AU = Redlight
    caid = 0500
    ident = 0500:043800

    in CCcam.cfg

    N: 127.0.0.1 15001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256


    N: 127.0.0.1 15002 test3 test4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

    ecmwhitelist format is incorrect format so would have been inactive and ineffective, so channels would be clearing regardless as all ECM lengths would be accepted.
    It should be;

    Code
    ecmwhitelist = 0500@042400:52,57;0500@042410:52,57;0500@FFF920:52,57

    If I take a while to respond, you can see why.....


    :red:

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login