help to reconfigure oscam

i need a bit of help with my oscam config because i want to swap my client boxes (around the house) from using cccam to oscam

My current setup is a Ubuntu server running oscam -r9584 with a white card. i share my card around the house using cccam with several boxes running openvix using cccam 2.30.

i want to swap these boxes cams to oscam. i am not sure how to configure my sever (if anything needs editng), protocols, ports etc, and i am not 100% on the config for oscam on the client boxes (to replace cccam)

server config

oscam.conf
[global]
logfile = stdout
nice = -1
preferlocalcards = 1

[cache]

[newcamd]
port = 10000@0963:000000
key = xxxxxxxxxxxxxeditiedxxxxxxxxxxxxxxxx
keepalive = 1
mgclient = 1

[cccam]
port = xxeditedxx
nodeid = 0A0xxeditedxx011
version = 2.0.11
reshare = 0
reshare_mode = 0
ignorereshare = 1

[webif]
httpport = 9999
httpuser = xeditx
httppwd = xeditx
httprefresh = 15
#httpallowed = 85.255.235.212,127.0.0.1,192.168.0.0-192.168.254.254
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxxx edited dns xxxxx

oscam.user
[account]
user = lounge
pwd = xxxxxxxx
au = 1
group = 1

[account]
user = bedroom1
pwd = xxxxx
group = 1

oscam.server
[reader]
label = skyuk
protocol = pcsc
device = 0
caid = 0963
detect = cd
group = 1
emmcache = 1,2,3
blockemm-unknown-u = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
audisbaled = 1

for my client boxes, how do i set up the oscam.server file to recieve the incoming line from my server?

i have run the cccam to oscam convertor and pumped a c: line into it but this hasnt worked when i copy the conversion to oscam.server on my other box.
i dont actually know if i should be converting a cline, or if i should be taking a different approach.

Quote from master G

You also need dvbapi enabled in oscam.conf and an account setup for it in oscam.user. I have already done this for you in the attached files.. Just pump the converted c line / [reader] into oscam.server..

MasterG do you mean those 3 attached oscam files are for my client box?
does this also mean my server config in post 1 is fine for oscam to oscam?

audisbaled : its been a few years since i set up all the config so i cant actually remember why i would activate disable automatic updates.?

ok, so thanks MasterG i have dropped your oscam files (along with my converted cline in the oscam reader format) onto a client box.

but when i check its status on my ubuntu server, using the webif i see under USERS, my box is connected by the "cccam" propocol. is this the best protocol to be using? i ask this because the whole point of this excercise for me was to remove the dependancy of cccam from my client boxes. ( i am seeing a few freezes on my white card so it was suggested to update cccam softcam to oscam)
Is the use of the cccam protocol correct for the oscam softcam on client boxes?

Quote from master G

Use whatever protocol is handy for you.

but if i am seeing small freezes on the hour on premium 28e, and to eliminate them i am trying to do away with cccam softcams, (with performance in mind) should i also switch to another protocol and dump cccam or is an alternate protocol like mgcamd not going to offer a significant difference

put another way, when using oscam as the client softcam, in terms of which protocol to use for best performance is there much in it between using cccam or mgcamd. ?

( i have pretty much got to where i wanted to be in terms of softcam: Ubuntu OSCAM server >> to client OSCAM softcam using cccam protocol, )

- - - Updated - - -

Quote from Bangord30

I'm seen a few folk with odd hourly freezes that swapping to mgcamd has solved it

do you mean mgcamd as the client softcam or the protocol (i might be getting confused here)

thanks for the clarity MasterG. i now have oscam running on my client boxes and i will leave it and see how it performs at the weekend.

I wonder if its even worth playing with mgcamd, maybe another day. thanks everyone for advice and comments its really helped.