blade 7000s

Here is the latest pre made one i can find a little out of date have you tried using the online channel lists from blades server?

BLADE_7000 Channel List_L53-v3.10-Final.
Released: Sunday 11 December 2011
==============================================

The L53 [Blade 7000] multi-sat channel list can be used with any receiver,
that accepts the following formats, .ndf .cndf, and supports a minimum of 10,000 channels.

Please Note:
If you receive the message [Insufficient Storage] when trying to install the channel list.
All you have to do is:
Goto Menu -> Installation -> Database Reset -> and Delete All Channels once all the channels have been deleted, re-boot the receiver, then simply follow the install instructions below.

How to install:
It's always advisable to delete ALL Channels before installing a New Channel List.
1 .. Download and unzip the L53 Channel list.
2 .. Place the unzipped ndf file onto a USB Stick [Formatted in FAT32].
3 .. Insert the USB Stick into the USB port on the rear of the receiver.
4 .. Now goto Menu -> Utilities -> Download and select the L53 channel list
now click the OK button and select [Normal DB] and click OK, the channel list
will now auto install, please do not interupt the installation.

Default Settings:
Default Satellite: Thor 1 West
Default start up channel: The Poker Channel
Default LNB: Universal 9.750 - 10.600
Default Motor Protocall: Diseqc 1.2
Satellite Coverage: 45 East - 30 West
Number of Satellites: 30
Favourites: Empty
Radio Channels: 0

Please Note:
Astra 1C is in an inclined orbit, so unless you have a motorised elevation setup on your dish,
you may not receive any signal.

Blade Sidebar Gadget:
Included in the zip file is a small program called Blade 7000s.gadget
Click it and it will install on your desktop.
Requirements:
Windows 7 or Windows Vista.

All the best
Laurals

Try this one!

are these on the blade 7000 itself by pressing

Menu
Blade Online
and select the sat you want takes about 5 secs
all done and all in order