Hi.... I got octagon 4k, CAN SOMEONE wich emu I need to use for that box??? and where I can find it?
Which softcam do i need to use on OCTAGON SF4008 UHD 4K ?
- rocuelo
- Thread is marked as Resolved.
There are 23 replies in this Thread which was already clicked 15,432 times. The last Post () by Need2learn.
-
-
[MENTION=225338]rocuelo[/MENTION] It uses the same softcam / emu as other ARM based receivers use. OSCam or NCam..
Which image are you using ?
-
[MENTION=225338]rocuelo[/MENTION] It uses the same softcam / emu as other ARM based receivers use. OSCam or NCam..
Which image are you using ?
openATV 6.0
Thanks master G -
-
Give the attached version a try buddy..
Hi master G, thanks a lot for your big help!
However I have some issue with the emu part..here my config:
Code
Display More[global] logfile = /dev/tty nice = -1 preferlocalcards = 1 [cache] [streamrelay] stream_relay_enabled = 0 [dvbapi] enabled = 1 au = 1 pmt_mode = 1 request_mode = 1 delayer = 70 ecminfo_type = 4 user = enigma read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 2 boxtype = dreambox [webif] httpport = 8081 httptpl = /usr/keys httprefresh = 30 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = 192.168.......... http_status_log = 1
Code
Display Moreoscam.dvbapi P: 2600:000000 P: 0500:060200,060210 A: ::000A:0104 2600:000000:1FFF # ERT 1 A: ::0014:0100 2600:000000:1FFF # ERT 2 A: ::0023:010A 2600:000000:1FFF # ERT 3 A: ::0028:0102 2600:000000:1FFF # ERT HD A: ::0064:1B5F 2600:000000:1FFF # ALPHA A: ::012C:1B60 2600:000000:1FFF # ANT1 A: ::015E:1B5E 2600:000000:1FFF # ART A: ::0190:1B5A 2600:000000:1FFF # M.tv A: ::01F4:1B5C 2600:000000:1FFF # MEGA A: ::0258:1B5B 2600:000000:1FFF # SKAI A: ::02BC:1B59 2600:000000:1FFF # STAR A: ::0320:1B5D 2600:000000:1FFF # E A: ::0007:008C 2600:0000:1FFF #RTRS
Code
Display Moreoscam.server [reader] label = constkeys protocol = constcw device = /usr/keys/constant.cw key = 0102030405060708091011121314 reconnecttimeout = 0 caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,06AD,0963,091F,A8 ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000;2600:000000;FFFF:000000;0E00:000000;06AD:000000;0963:000000;091F:000000 group = 1 [reader] label = SRGV6 protocol = internal enable = 0 device = /dev/sci0 caid = 0500 detect = cd mhz = 450 cardmhz = 2700 ident = 0500:060200,060210 group = 1 emmcache = 1,1,2,0 [reader] label = Tvsat protocol = internal device = /dev/sci0 caid = 183D,183E rsakey = A92............ detect = cd nagra_read = 2 mhz = 450 cardmhz = 2700 ident = 183D:000000,005411;183E:000000,005411 group = 1 emmcache = 1,3,15,0
Code
Display Moreoscam.user [account] user = enigma description = dvbapi failban = 1 au = 1 emmreassembly = 1 group = 1,2,3,4,5,6,7,8,9 cccmaxhops = -1 cccreshare = 1 cccignorereshare = 1
tvsat card ok works
biss ok works
emu (like srg or arena tandberg not working) ..I have this message on log: rejected reader sid by SoftCam.KeyThanks a lot
-
The above oscam is not oscam-emu. Try NCam instead..
-
The above oscam is not oscam-emu. Try NCam instead..
Thanks a lot. emu works, internal card too.... biss not! I tried also to add a constant.cw reader... what you'll suggest?
-
ncam uses softcam.key, not constant.cw
-
ncam uses softcam.key, not constant.cw
tried with different softcam always this message on log:
(ecm) linuxsatsupport (2600@000000/0000/0003/0B:152DF65181B648B7B2BB82EDA0534E1E): rejected group (0 ms) (no matching reader) -
rejected group (0 ms) (no matching reader)
Make sure the dvbapi [account] has the group for all readers (example: group = 1,2,3,4,5,6).
-
Give the attached version a try buddy..
thanks very much, you are really very cain..always great service!!!!!!
-
I am an SF4008 owner with image OpenATV 6.0. Can someone show me the steps to manually install the latest Oscam available? On Streamboardtv there are only "tar.gz" file, but the decoder only recognizes .ipk files. Can you explain the step by step procedure? I searched in the forum but had no luck...
-
I am an SF4008 owner with image OpenATV 6.0. Can someone show me the steps to manually install the latest Oscam available? On Streamboardtv there are only "tar.gz" file, but the decoder only recognizes .ipk files. Can you explain the step by step procedure? I searched in the forum but had no luck...
Use the attached version.
FTP to /tmp folder > blue button > plugins > ipk installer > 3 memory /tmp > follow on sreen instructions.
-
Thank you very much, it worked!
-
any idea how to run oscam_emu on openEight how to get it from ??
-
For Open8eight:
Install atv oscam. For run and stop oscam You must insert to /etc/init.d two script file:
1. softcam.None --> chmod755, keep empty (for softcam stop)
2. softcam.oscam --> chmod755, (for softcam start/restart) content example:Bash
Display More#!/bin/sh case "$1" in start) ulimit -s 1024 /usr/bin/oscam_atv --config-dir /usr/keys/oscam_atv --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8 ;; stop) kill `cat /tmp/oscam.pid` 2> /dev/null ;; restart|reload) $0 stop sleep 1 $0 start ;; version) echo "atv" ;; info) echo "oscam atv" ;; *) echo "Usage: $0 start|stop|restart" exit 1 ;; esac exit 0
Now to run oscam press Blue / Cam Setup / Select Softcam <> / Restart softcam / OK.
If You want to install oscam from feed via box menu, first install softcamfeed:
softcam-feed-arm-ahf_1.1_armv7ahf-vfp-neon.ipk
After softcamfeed install You find softcams for download and install in Menu / Plugins / Download plugins (Green).
After softcam install You find in:
/usr/bin/oscam_atv --> oscam bin file --> chmod755
/usr/keys/oscam_atv --> directory for your oscam config files --> chmod644
/etc/oscam_atv.emu --> running script for oscam ATV image - this file will be ignored
Now it is necessary to /etc/init.d insert two text files mentioned above.
How to install and start oscam in Open8eight:
-
any idea or oscam feed for openeight 6.0??? feed's above not working on openeight6.0 :(
-
any idea or oscam feed for openeight 6.0??? feed's above not working on openeight6.0 :(
Its an openpli based image. So use softcams built for openpli.
-
Hello, would you please send me for open8 i mean version 5 script and configuration osory for skylink?
-
Hi guys! Any idea how to run oscam and CI+ card together on Openeight 6
or Openatv 6.0? Oscam and CI+ works fine seperately, but not together.
(i know that work together on Egami 7.2.16, but not on Egami 8.0) Thanx!
OCTAGON SF4008 4K UHD Linux Enigma 2 2160p Wifi Multi-Stream Dual DVB-S2X & DVB-C/T2 Combo Receiver.
Download OCTAGON SF4008 4K UHD Images and Enigma2 Team Support from OpenATV, OpenDroid, OpenESi, OpenHDF, OpenPLi, OpenLD, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!