is my Lnb knackered.

Hi All,

I flashed a fresh install of the latest Vix Image on my Solo2.
I carried out a service scan on 28.2 and only found 575 channels, "problem" no Sly feeds.
All FTA, BT & Eir channels but no Sly.
Put a meter on the the dish and the signal is 87%.
Took a feed from the neighbors dish and scanned all channels no bother.
My dish is a technomate and an ultra dark quab Lnb, the neighbors is the standard sly dish.
Anyone encounter this issue, or have any insight to a fix, apart from the obvious.

Cheers
Suttsy

How can I check this mate?

Quote from THE FUGITIVE

Can you check the frequencies and polarity of the channels you scanned for instance if the channels scanned are all H polarity and no V channels are coming in then YES your LNB is failing or it could be the other way around where you recieve ALL V channels and no H channels if you check this it may give a insight to your issue

Tried that mate cheers.

Quote from TK4|2|1

Are all outputs being used on your quad? You could try different ports as it's basically four lnb's in one box.

- - - Updated - - -

Update! checked a few channels and have both H & V polarities, thought I was on a winner until I got both,,,,

Quote from suttsy

How can I check this mate?

Thanks for the replys mate, I did all the above, before the post, so its looking like a new Lnb, could be worse I suppose, thanks again to all.

Quote from THE FUGITIVE

Yes i thought of that too that is why i said check frequencies and polarity it could as the poster says still be LNB fault but i would check simple things first