Hi, Failed attempt at running a script and my 4K is bricked and I cannot flash it (it is stuck on the initial splash screen). I think I need to flash a bootloader but cannot find it. Anyone can help?
Bricked my VU+ 4K
- al2813
- Thread is marked as Resolved.
-
-
It's not bricked. For it to be bricked you're have nothing on your TV. Try another USB stick.
-
Can you ftp or telnet in to the box. This way, you'd be able to save any config
Then, you should be able you reflash latest image and setup and transfer config back
Try another Usb flash drive
Make sure you have no other USB drive plugged in the back -
I tried already two USB sticks. One of them flashed my DUO2 on Sunday. Don't think it's the problem.
- - - Updated - - -
And I cannot telnet the box either :-(
- - - Updated - - -
just tried a third usb stick and it is working!!!!
Thanks everybody
-
For those that follow....read this thread:
http://linuxsat-support.com/sh…a-new-image-on-Vu-Solo-4K -
mmmmmm....... it s not formatting - I get to flashing image and than the LCD shows nothing and the process is not moving forward. 2 different USBs with the same result.
-
What image are you trying to install .
Try a basic image no addons etc like openblackhole new flash file released in dec
-
If the LCD shows nothing and the process is not moving, unplug usb then plug back in, sometimes it starts to continues flashing on some images
Just don't use cheap USB sticks they never last long- - - Updated - - -
you haven't got anything else plugged into your USB ports have you
if you have it won't flash -
I managed to flash open blackhole which than boots OK. However when trying than to reflash with openpli, it gets stuck. No clue why.
-
The image could be corrupt try another image
-
master G
Moved the thread from forum Vu+ SOLO4K Support to forum VU+ SOLO 4K. -
i got the same issue the image stuck on the initial stage please any body have latest boot loader that can fix the image
-
Hello scuse me a have a probleme my vuplus zero 4k remains stuck on the imagine wit lalanguge on evri imagine a put on the the receiver is duing the seme ting pleas can sombudy hel me?
-
Conect ttl on serial pin and get all info cech nand flash ok.
-
i think you you have to use usb to flash if :
1. download image to your recevier
2. turn the reciever off
3. set the usb on it
4. turn it on and follow the steps
5. wait intil the flashing ends and take off the usb
6. if needed restart your reciever
7. about your plugins you can install it again and your abonement from the seller again.
good luck
VU+ SOLO 4K PVR ready Linux Enigma2 Receiver UHD 2160p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!