dm900 Please consider updating your rescue loader!

There are 3 replies in this Thread which was already clicked 5,615 times. The last Post () by master G.

  • have been trying different images to find one with softcam included
    now I have messed up the dm900
    It will not load up at all
    So tried to flash anther image it returns error and wont flash


    when i use online recovery
    and the following happens







    [*] Remounting '/dev/mmcblk0p3' to '/data'
    [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/recovery.sig'
    [*] Copying 'recovery' from local storage
    [*] Verifying signature of 'recovery'
    gpgv: Signature made Wed Dec 21 02:02:08 2016 UTC using RSA key ID 7DA27561
    gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>"
    [*] Unmounting '/data'
    [*] Running './recovery'
    [*] Options '-v -b -r'
    Warning: Could not read CA!
    Warning: Please consider updating your rescue loader!
    Warning: Could not read CA!
    Warning: Please consider updating your rescue loader!
    [*] Mounting '/dev/mmcblk0p3' to '/data'
    [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/dreambox-image-dm900.tar.xz.sig'
    [*] Copying 'dreambox-image-dm900.tar.xz' from local storage
    [*] Verifying signature of 'dreambox-image-dm900.tar.xz'
    gpgv: Signature made Sat Dec 10 00:27:46 2016 UTC using RSA key ID 7DA27561
    gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>"
    Warning: Could not read CA!
    Warning: Please consider updating your rescue loader!
    [*] Mounting '/dev/mmcblk0p2' to '/mnt'
    [*] Remounting '/dev/mmcblk0p3' to '/data'
    sed: /mnt/etc/shadow: No such file or directory
    [*] Unmounting '/mnt'
    [*] Unmounting '/data'
    Fatal: Failed to execute './recovery'


    can anyone help?

    • Official Post

    open telnet/ssh session and type:


    Code
    wget http://www.dreamboxupdate.com/opendreambox/2.5/unstable/images/dm900/zImage-rescue-3.14-r0-dm900-20170113.bin
    flash-rescue zImage-rescue-3.14-r0-dm900-20170113.bin


    When the image loads update the rescue loader in telnet/ssh:

    Code
    apt-get update && update-rescue -v


    Now you should be able to flash a new image of choice.

  • master G

    Added the Label Image Flashing & Backup Support

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!