im getting picture freeze and breakup on this transponder any one else have problem like me
picture breakup transpnder 11656 v s/r 22.000
- ishara
- Thread is marked as Resolved.
-
-
On which satellite?
-
On which satellite?
Zee Tv mate ....only reason i know is i just got it going for someone...not a channel i use but i checked and all seems fine with no freezing so must be the members online thingy
-
just started a couple of days ago and and different emu still same.its like sat being out of line or lost its postion.so far its zee tv,zee punjabi,&tv which is fta all on 11656v 28e.when fta is glitching aswell it cant be number of people thing can it?
-
so basically all are like this on this transponder
-
Did you check your satellite signal and make sure that its ok on the quality
-
yes signal is 80% all other transpnders ok
-
Strength or quality?
-
deffo check your wiring and change your lnb looks like a dish problem
-
could be what you say. i have extended the cable in doing so had to use two f plugs that is
made two joins in the cable that may be problem,cable is probably near 35- 40 metres in length.i might get another length of cable and take out all connectors and have just one single length,that may help.i am using motorised set up 1,1cm dish and moteck ii drives the dish
-
could be what you say. i have extended the cable in doing so had to use two f plugs that is
made two joins in the cable that may be problem,cable is probably near 35- 40 metres in length.i might get another length of cable and take out all connectors and have just one single length,that may help.i am using motorised set up 1,1cm dish and moteck ii drives the dish
Joins should not be a problem as long as you used the f type barrell connectors which i think you have.
It definately looks like either dish alignment/line of sight issues or lnb.
Recheck all connections tho as you will have 8 in total.
-
thanks for reply. yes i have used the coupler you mentioned as above,two of them.but what i cant undrestand is why channels on this frequency only.all other channels on other frequency are ok.is this frequency on low power(11656v 22000)
-
thanks for reply. yes i have used the coupler you mentioned as above,two of them.but what i cant undrestand is why channels on this frequency only.all other channels on other frequency are ok.is this frequency on low power(11656v 22000)
Its nothing to do with low power although your kinda on the right track of thinking...for instance with rf signals in the past lower signals produced better signal quality//these days lnb/s can drop out certain transponders if guilty regardless of signal strength signals....
I assume you have a quad lnb so try the other ports.....or try a new lnb mate/alignment....they are fairly inexpensive on fleebaay
-
thankyou for reply.i have ultra black twin lnb about 9 monthas old from new.so i dont know if they can fail that quickly.i have now ordered fresh length of 50m reel cable and try if that fixes the problem.dish is a bit high so not easy to get to.
-
hi just done some more measurements.on the 11656 freq. quality 20 odd to 40 ish changing too quickly to see properly. poor picture pixellating
showcase channel quality 58% freq.11598v picture good
1tv channel 10906v 70% quality picture good
-
on vosolo2 sat finder snr is 73-84 jumping back and forth
agc is 95 constant
lock is green/red jumping from green to red back and forth not constant
-
wow just changed channels and-all ok again no pixellation and clear picture like the rest i wonder what happenned.and now i have ordered new reel of 50m cable due to arrive monday!
-
well that was short lived. this morning all the symptoms have returned.i havent changed anything my end.odd
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
