powervu oscam

There are 9 replies in this Thread which was already clicked 5,311 times. The last Post () by GAZA12.

    cannot get powervu channels, can anyone make sense of the this log?

    • 2017/05/04 13:13:37 00000000 s (main) System name = Linux
    • 2017/05/04 13:13:37 00000000 s (main) Host name = dm520
    • 2017/05/04 13:13:37 00000000 s (main) Release = 3.4-4.0-dm520
    • 2017/05/04 13:13:37 00000000 s (main) Version = #1 SMP Sun Jan 15 17:54:22 CET 2017
    • 2017/05/04 13:13:37 00000000 s (main) Machine = mips
    • 2017/05/04 13:13:37 00000000 s (main) Stb model = dm520
    • 2017/05/04 13:13:37 00000000 s (main) Stb vumodel = vuultimo
    • 2017/05/04 13:13:37 00000000 s (main) Stb boxtype = vuultimo
    • 2017/05/04 13:13:37 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 507
    • 2017/05/04 13:13:37 00000000 s (config) services reloaded: 0 services freed, 32 services loaded, rejected 0
    • 2017/05/04 13:13:37 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    • 2017/05/04 13:13:37 00000000 s (main) signal handling initialized
    • 2017/05/04 13:13:37 00000000 s (config) 4944 service-id's loaded in 132 ms
    • 2017/05/04 13:13:37 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
    • 2017/05/04 13:13:37 00000000 s (config) HINT: --> use optimized lists from http://www.streamboard.tv/wiki/Srvid
    • 2017/05/04 13:13:37 00000000 s (net) cccam: initialized (fd=4, port=12000)
    • 2017/05/04 13:13:37 00000000 s (reader) SoftCam.Key [constcw] creating thread for device /etc/tuxbox/config/SoftCam.Key
    • 2017/05/04 13:13:37 00000000 s (reader) constant.cw [constcw] creating thread for device /etc/tuxbox/config/constant.cw
    • 2017/05/04 13:13:37 00000000 s (reader) oscam.keys [constcw] creating thread for device /etc/tuxbox/config/oscam.keys
    • 2017/05/04 13:13:37 00000000 s (reader) oscam.constant.cw [constcw] creating thread for device /etc/tuxbox/config/oscam.constant.cw
    • 2017/05/04 13:13:37 00000000 s (reader) CCcam [cccam] creating thread for device xxxxxxxxxxxxxxxxx
    • 2017/05/04 13:13:37 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
    • 2017/05/04 13:13:37 00000000 s (main) waiting for local card init
    • 2017/05/04 13:13:37 17DD5B16 p (constcw) Local reader: oscam.constant.cw (file: /etc/tuxbox/config/oscam.constant.cw)
    • 2017/05/04 13:13:37 17DD5B16 p (constcw) ERROR: Can't open /etc/tuxbox/config/oscam.constant.cw (errno=2 No such file or directory)
    • 2017/05/04 13:13:37 17DD5B16 p (reader) oscam.constant.cw [constcw] proxy initialized, server /etc/tuxbox/config/oscam.constant.cw:0
    • 2017/05/04 13:13:37 3AAE187F p (constcw) Local reader: constant.cw (file: /etc/tuxbox/config/constant.cw)
    • 2017/05/04 13:13:37 31F4413D p (constcw) Local reader: SoftCam.Key (file: /etc/tuxbox/config/SoftCam.Key)
    • 2017/05/04 13:13:37 3AAE187F p (constcw) ERROR: Can't open /etc/tuxbox/config/constant.cw (errno=2 No such file or directory)
    • 2017/05/04 13:13:37 3AAE187F p (reader) constant.cw [constcw] proxy initialized, server /etc/tuxbox/config/constant.cw:0
    • 2017/05/04 13:13:37 3FCE96B0 p (constcw) Local reader: oscam.keys (file: /etc/tuxbox/config/oscam.keys)
    • 2017/05/04 13:13:37 3FCE96B0 p (constcw) ERROR: Can't open /etc/tuxbox/config/oscam.keys (errno=2 No such file or directory)
    • 2017/05/04 13:13:37 31F4413D p (reader) SoftCam.Key [constcw] proxy initialized, server /etc/tuxbox/config/SoftCam.Key:0
    • 2017/05/04 13:13:37 3FCE96B0 p (reader) oscam.keys [constcw] proxy initialized, server /etc/tuxbox/config/oscam.keys:0
    • 2017/05/04 13:13:37 1DAEAE90 h (webif) webif: decompressed 170465 bytes back into 418544 bytes
    • 2017/05/04 13:13:37 1DAEAE90 h (webif) HTTP Server running. ip=0.0.0.0 port=83
    • 2017/05/04 13:13:37 3280A5C0 p (reader) xxxxxxxxxxxxxx: resolved ip=xxxxxxxxxxxxxxxxx
    • 2017/05/04 13:13:37 3280A5C0 p (reader) CCcam [cccam] connecting to xxxxxxxxxxxxxxxxxx:21000
    • 2017/05/04 13:13:37 3280A5C0 p (reader) CCcam [cccam] connect failed: Connection refused
    • 2017/05/04 13:13:37 3280A5C0 p (reader) CCcam [cccam] proxy initialized, server xxxxxxxxxxxxxxxxxxxx:xxxx
    • 2017/05/04 13:13:37 00000000 s (main) init for all local cards done
    • 2017/05/04 13:13:37 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
    • 2017/05/04 13:13:37 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
    • 2017/05/04 13:13:37 00000000 s (anticasc) anti cascading disabled
    • 2017/05/04 13:13:37 5CC69684 c (client) plain dvbapi-client granted (dvbapiau, au=auto (5 reader))
    • 2017/05/04 13:13:40 5CC69684 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
    • Official Post

    Be careful when posting logs that you don`t give away ports, ip addresses or hostnames. I`ve removed them from your post.


    That log is from startup, nowhere does it show you trying to view any powervu channels. So we`ve no way of knowing what the issue is.


    Are you using regular oscam or oscam-emu ? You need oscam-emu for PowerVU.


    Remove any readers from oscam.server you have created for the Softcam.Key. oscam-emu creates a reader itself.


    Use this -> SoftCam Keys

    MAny thanks masterG, for your time

    have used softcam as you say, and also have tried following your intuitions from your helping others posts, and I think I have progressed a little the log is now different

    2017/05/04 16:38:17 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11273 (mipsel-unknown-linux-gnu)

    2017/05/04 16:38:17 00000000 s (main) System name = Linux

    2017/05/04 16:38:17 00000000 s (main) Host name = dm520

    2017/05/04 16:38:17 00000000 s (main) Release = 3.4-4.0-dm520

    2017/05/04 16:38:17 00000000 s (main) Version = #1 SMP Sun Jan 15 17:54:22 CET 2017

    2017/05/04 16:38:17 00000000 s (main) Machine = mips

    2017/05/04 16:38:17 00000000 s (main) Stb model = dm520

    2017/05/04 16:38:17 00000000 s (main) Stb vumodel = vuultimo

    2017/05/04 16:38:17 00000000 s (main) Stb boxtype = vuultimo

    2017/05/04 16:38:17 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 534

    2017/05/04 16:38:17 00000000 s [Emu] oscam-emu version 732

    2017/05/04 16:38:17 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

    2017/05/04 16:38:17 00000000 s (main) signal handling initialized

    2017/05/04 16:38:17 00000000 s (reader) constkeys [constcw] creating thread for device /usr/keys/constant.cw

    2017/05/04 16:38:17 00000000 s (reader) oscam_emu [emu] creating thread for device emulator

    2017/05/04 16:38:17 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

    2017/05/04 16:38:17 00000000 s (main) waiting for local card init

    2017/05/04 16:38:17 1ExxxBA p (constcw) Local reader: constkeys (file: /usr/keys/constant.cw)

    2017/05/04 16:38:17 1Exxx7BA p (constcw) ERROR: Can't open /usr/keys/constant.cw (errno=2 No such file or directory)

    2017/05/04 16:38:17 1EDxxxBA p (reader) constkeys [constcw] proxy initialized, server /usr/keys/constant.cw:0

    2017/05/04 16:38:17 00000000 [Emu] info: FFDecsa parallel mode = 64

    2017/05/04 16:38:17 5Fxxx9F r [Emu] reading key file: /etc/tuxbox/config/SoftCam.Key

    2017/05/04 16:38:17 7225B052 h (webif) webif: decompressed 174259 bytes back into 425544 bytes

    2017/05/04 16:38:17 7xxxx052 h (webif) HTTP Server running. ip=xxxx port=xxxx

    2017/05/04 16:38:17 5F3xx99F r (reader) oscam_emu [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

    2017/05/04 16:38:18 5Fx99F r (reader) oscam_emu [emu] card detected

    2017/05/04 16:38:19 5Fxxx9F r (reader) oscam_emu [emu] found card system emu

    2017/05/04 16:38:19 5Fxxx9F r (reader) oscam_emu [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

    2017/05/04 16:38:19 5F3xxx9F r [Emu] reading key file: /etc/tuxbox/config/SoftCam.Key

    2017/05/04 16:38:20 00000000 s (main) init for all local cards done

    2017/05/04 16:38:20 00000000 s (emmcache) loading emmcache disabled since no reader is using it!

    2017/05/04 16:38:20 00000000 s (emmcache) loading emmstats disabled since no reader is using it!

    2017/05/04 16:38:20 00000000 s (anticasc) anti cascading disabled

    2017/05/04 16:38:20 69xxx052 c (client) plain dvbapi-client granted (enigma, au=auto (2 reader))

    2017/05/04 16:38:20 69xxx052 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

    have replaced some digits as you suggest with xxx

    Still no picture although bottom of log says success, have used powervu key updater and the result was all keys updated successfully, but still no picture




    2017/05/05 13:17:06 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11273 (mipsel-unknown-linux-gnu)

    2017/05/05 13:17:06 00000000 s (main) System name = Linux

    2017/05/05 13:17:06 00000000 s (main) Host name = dm520

    2017/05/05 13:17:06 00000000 s (main) Release = 3.4-4.0-dm520

    2017/05/05 13:17:06 00000000 s (main) Version = #1 SMP Sat Feb 4 06:58:16 CET 2017

    2017/05/05 13:17:06 00000000 s (main) Machine = mips

    2017/05/05 13:17:06 00000000 s (main) Stb model = dm520

    2017/05/05 13:17:06 00000000 s (main) Stb vumodel = vuultimo

    2017/05/05 13:17:06 00000000 s (main) Stb boxtype = vuultimo

    2017/05/05 13:17:06 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 512

    2017/05/05 13:17:06 00000000 s [Emu] oscam-emu version 732

    2017/05/05 13:17:06 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

    2017/05/05 13:17:06 00000000 s (main) signal handling initialized

    2017/05/05 13:17:06 00000000 s (config) 1 service-id's loaded in 2 ms

    2017/05/05 13:17:06 00000000 s (net) newcamd: initialized (fd=4, port=ZZZZZ, prio=1)

    2017/05/05 13:17:06 00000000 s (net) cccam: initialized (fd=5, port=ZZZZ, prio=1)

    2017/05/05 13:17:06 00000000 s (reader) emulator [emu] creating thread for device emulator

    2017/05/05 13:17:06 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

    2017/05/05 13:17:06 00000000 s (emmcache) loading emmcache disabled since no reader is using it!

    2017/05/05 13:17:06 00000000 s (emmcache) loading emmstats disabled since no reader is using it!

    2017/05/05 13:17:06 00000000 s (anticasc) anti cascading disabled

    2017/05/05 13:17:06 00000000 [Emu] info: FFDecsa parallel mode = 64

    2017/05/05 13:17:06 68EA1582 r [Emu] reading key file: /etc/tuxbox/config/SoftCam.Key

    2017/05/05 13:17:06 0C3352E5 c (client) plain dvbapi-client granted (linuxsatsupport, au=off)

    2017/05/05 13:17:06 0C3352E5 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

    2017/05/05 13:17:06 547E0C68 h (webif) webif: decompressed 174259 bytes back into 425544 bytes

    2017/05/05 13:17:06 547E0C68 h (webif) HTTP Server running. ip=0ZZZ port=ZZZ

    2017/05/05 13:17:06 68EA1582 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

    2017/05/05 13:17:07 68EA1582 r (reader) emulator [emu] card detected

    2017/05/05 13:17:08 68EA1582 r (reader) emulator [emu] found card system emu

    2017/05/05 13:17:08 68EA1582 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

    2017/05/05 13:17:08 68EA1582 r [Emu] reading key file: /etc/tuxbox/config/SoftCam.Key

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login