thanks master g for the reply wish to know if you know any oscam that can read conax card
Which oscam can read conax card
-
- General OSCam
- johnkiema
- Thread is marked as Resolved.
-
-
Depends which card / provider it is. Give us a clue..
-
provider startimes
-
This card isn`t on the oscam cards list wiki -> http://www.streamboard.tv/oscam/wiki/CardsList
If it is possible, the configuration isn`t public.
-
hi master g thanks for the reply i wish to know do you have oscam config for card reader on vu solo
-
No, sorry i don`t.
-
It is possible I misunderstand the question, but it is config.fil which determines which card to read?
I have conax nordic channels, all read by oscam -
wika i need the configs and oscam can you send to me
-
plse power vu ecm emu
send me powervu emulator
-
This is no secret so I'll post it here.
Copy and paste this into the oscam.server file.
I have not tested, but this should also work with Ncam
With me it works with all the oscam versions I've tried on the conax Nordic.
[reader]
label=Canal_Digital_Nordicenable=1
protocol=internal
device=/dev/sci0
detect=cd
group=1
emmcache=1,3,15
audisabled=0
mhz=357
cardmhz=2700
ratelimitecm=4
ratelimittime=9000
ecmunique=1
srvidholdtime=2000
cooldown=30,600
plse power vu ecm emu
I have no knowledge of Power VU
-
thanks brother will try it and update you results and thanks alot for response and setting
-
hi wika i tried the settings you gave me it read like this
2017/08/23 16:32:24 6F2A9884 r (reader) upper_card [internal] card detected
2017/08/23 16:32:24 02A49800 r (reader) lower_card [internal] card detected
2017/08/23 16:32:25 58F782A1 r (reader) emulator [emu] found card system emu
2017/08/23 16:32:25 58F782A1 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/08/23 16:32:25 58F782A1 r reading key file: /etc/tuxbox/config/oscam/SoftCam.Key
2017/08/23 16:32:30 6F2A9884 r (reader) upper_card [internal] ERROR: no characters found in ATR!
2017/08/23 16:32:30 6F2A9884 r (reader) upper_card [internal] Deactivating card
2017/08/23 16:32:30 6F2A9884 r (reader) upper_card [internal] Read ATR fail, attempt 1/7 fs = 9
2017/08/23 16:32:35 02A49800 r (reader) lower_card [internal] ERROR: no characters found in ATR!
2017/08/23 16:32:35 02A49800 r (reader) lower_card [internal] Deactivating card
2017/08/23 16:32:35 02A49800 r (reader) lower_card [internal] Read ATR fail, attempt 1/7 fs = 9
2017/08/23 16:32:40 6F2A9884 r (reader) upper_card [internal] ERROR: no characters found in ATR!
2017/08/23 16:32:40 6F2A9884 r (reader) upper_card [internal] Deactivating card
2017/08/23 16:32:40 6F2A9884 r (reader) upper_card [internal] Read ATR fail, attempt 2/7 fs = 8
2017/08/23 16:32:45 02A49800 r (reader) lower_card [internal] ERROR: no characters found in ATR!
-
Which tuner you have and what image do you use?
-
the box is pro v3 solo enginma 2 the image is openpli4 this is the info about tuner
main:
1. DVB-S2/S Tuner
2. BCM7358 752MHZ MIPS Processor
3. 512MB RAM (2*256MB DDR3)
4. Image Support: Openpli,Openvix,OpenATV,OpenHD,Blackhole,Italy7 and so on -
Now I'm unsure.
My Oscam.server file is intended for tuners with 1 card reader
"2017/08/23 16:32:25 58F782A1 r reading key file: /etc/tuxbox/config/oscam/SoftCam.Key". It seems to stop here.
Is this the correct location of softcam.key ev oscam.server ?
I use: /etc/tuxbox/config/SoftCam.Key" and
/etc/tuxbox/config/oscam.server".
Try editing this in your oscam.server file.
If you use softcam.key
[reader]
label=emulatorprotocol=emu_2
device=/etc/tuxbox/config/SoftCam.Key
fallback=1
detect=cd
group=2
emmcache=1,1,2,1
-
thanks for the respond brother i will try it now and I wish to ask if you have a good oscam that can read oscam card will appreciate conax
-
There is probably what is added to config.files that essentially determines what a softcam can read, and not the softcam version.
-
oh okay because I am using oscam emu and softcam with emu keys
-
Then it is important that .server file refers to the location of softcam.key
OSCam Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!