There are 15 replies in this Thread which was already clicked 9,297 times. The last Post () by esmeralda1.
KIII_PRO_AVL6862-ota-20170905.174619.V0619
https://mega.nz/#F!1uhzgSiT!0dbtH-iPNUJgEl3dMhcQGg
Direct from Mecool
after tested cccam works exellent
How a property worksDVB C
How configuration MODE DVB-C ...?
KIII_PRO_AVL6862-ota-20170905.174619.V0619
https://mega.nz/#F!1uhzgSiT!0dbtH-iPNUJgEl3dMhcQGg
Direct from Mecool
after tested cccam works exellent
Hi just ordered the box and flashed above firmware but absolutely clueless with Cccam and dvb-c scan for UK any help with the settings will be appreciated
KIII_PRO_AVL6862-ota-20170905.174619.V0619
https://mega.nz/#F!1uhzgSiT!0dbtH-iPNUJgEl3dMhcQGg
Direct from Mecool
after tested cccam works exellent
Hi just ordered the box and flashed above firmware but absolutely clueless with Cccam and dvb-c scan for UK any help with the settings will be appreciated
From dtv menu, press 111111
for about three days TVCenter is no longer open, but if I disconnect from the internet, the app starts up with no addon. I reinstalled the TV Center, but if I'm connected to the Internet, it does not start ... as if at the first release it does a server check ... I do not know what it can be. The player is connected to the internet with a cable and if I go to About \ Status networking ... at the mac address it appears: 02: 00: 00: 00: 00, but if I connect through wifi I get the correct mac address corresponding to the network card wireless .. on the other hand when I'm connected with a cable and disable wifi .... in the router I get the correct mac address ... on the back of the case.
Can someone look to see what's on About \ Status network ... but be connected with cable and disable to wifi ???
I have a fw version of 20170905
Display MoreKIII_PRO_AVL6862-ota-20170905.174619.V0619
https://mega.nz/#F!1uhzgSiT!0dbtH-iPNUJgEl3dMhcQGg
Direct from Mecool
after tested cccam works exellent
Hi just ordered the box and flashed above firmware but absolutely clueless with Cccam and dvb-c scan for UK any help with the settings will be appreciated
From dtv menu, press 111111
I have done that oscam is not an issue nor the satellite channels but for the life of me I can not scan DVB-C channels as the setting is only either Brazil or china... and the manual 6887 symbol rate don't work either..
dvb-c work only on you cable network provider !! 6887 symbol rate is virgin network united kingdom and work only uk , Dont work brazil or europe or china
Work in Brazil Symbol Rate 5217.
dvb-c work only on you cable network provider !! 6887 symbol rate is virgin network united kingdom and work only uk , Dont work brazil or europe or china
I don't know if you missed it but I am in the UK and my symbol rate is 6887 and I know my provider is virgin.. hence I asked that how did you mange to scan channels in the UK which I could tell by looking at your screenshots in the other post. As I cannot find a way to do it I know my area frequency/symbol rate/ NET ID and I did put it in but it comes back within a second with nothing...
hi can someone send me the image for mecool k3pro for update the firmware
KIII_PRO_AVL6862-NHG47L-20170905.174619.V0619.img
Is there any possibility to go back with KIII Pro new ver (after Nov 2018) to stock firmware with DTV - I tried all 2017, 2018 and 2019 stock firmwares - some works without DTV and some even do not flash (E3004 : This package is for "KIII_PRO_VSDVB" devices; this is "KIII_Pro") - maybe you have working DTV stock firmware?
KIII_PRO_AVL6862-ota-20170905.174619.V0619
https://mega.nz/#F!1uhzgSiT!0dbtH-iPNUJgEl3dMhcQGg
Direct from Mecool
after tested cccam works exellent
link not found 😢
Don’t have an account yet? Register yourself now and be a part of our community!
