Posts by esmeralda1
-
-
@ DRAGON@ hi mate thanks very good skin thanks , i have problem weather bar dont show on my zgemma h9 twin
-
-
-
upgrade from Mars to Ecam version
to upgrade you need rs232 cable mate !!!
-
hi mates i have test the file and works perfect
notes please if you have mars software please
use the cable usb mars dont work !!!
BISS AUTO UPDATE !!!
-
-
-
HI Biko respect thanks mate works super
-
hi biko mate the only thing i cant change between 4 different style i tray but no luck
-
working excellent on zgemma h9 twin with openatv 7.3 super skin
thanks to Nitro Team !!
-
-
Templeton hi im looking for streamrelay list mate i have the provider on full
HERE IS THE SAMLPE BUT IM LOOKING FOR Movistar+ on Astra
#NAME ======SKY iCAM Stream relay
#SERVICE 1:64:54:0:0:0:0:0:0:0:
#DESCRIPTION •••••::| SKY Sport |::•••••
#SERVICE 1:0:1:17CB:7D7:2:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a17CB%3a7D7%3a2%3a11A0000%3a0%3a0%3a0%3a:SkySp%20Mix
-
-
here with picture
-
dish and motor set up on thor 1 west 100% signal quality the wall bracet or ground pool mast bee 100% line up the dish on set up dipend on your location an you will receive all satellite from 50 east to 50 west
-
@Bugo sorry mate sold !! goon
-
OSCam-11718-798 is any ipk file format for zgemma H9 twin too test
-
Quote
Thank you for your link but i have been flashing images to a usb for over 15 years and have never had any issues until now.
ZigZag hi mate tray with diferent usb get new one 16 gb . and Format a USB stick to FAT32.
-
here mate
[TUTO] How To flash/update Xtrend ET9x00
What you need before we start:
1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image).
2) Image of your choice.
3) Compression software such as 7zip, Winrar, Winzip
PREPARATION
1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.
3. Open the folder you extracted to your desktop, in this case named IMAGE-et9000_usb.zip , you will see another folder named et4x00, this is your image file. Copy the entire et9x00 folder directly to the USB stick.
– Fully power the receiver down via the rocker switch at the rear of the receiver.
– Make sure no USB devices are plugged into the receiver at this point.
– Insert the USB stick containing the image files into one of the USB ports on the receiver.
– Power the receiver on from the rear rocker switch.
– Press the OK button on the front panel ( behind the card flap ), to initiate the flashing process .
– If successful the receiver will reboot it self after the flashing process has completed.
-Warning-
During upgrading, please don’t unplug power or shut down STB.
Don’t power off within 5 seconds after upgrade is completed.