@acypaczom
could i solve this problem installing a new firmware ?
There are 55 replies in this Thread which was already clicked 2,500 times. The last Post () by jeansmania.
@acypaczom
could i solve this problem installing a new firmware ?
@acypaczom
could i solve this problem installing a new firmware ?
99,9% yes. If it fails, search for service because it can be hardware problem.
@acypaczom
could i solve this problem installing a new firmware ?
Make sure you do not restore items afterwards.
Make sure you do not restore items afterwards.
YES, this is very important, i forgot, tq abu baniaz for watchfulness.
I'm reading a lot about how to flash the decoder but honestly I'm a bit confused because for example I downloaded the latest version of Openpli but I can not find the file in the folder H9 called No Force useful to force the reading of the firmware.
create one in folder where you have installation files, it can be empty. But i think it is not needed.
Acording to https://wiki.openpli.org/Zgemm…ma_H9S.2FT_and_H9.2S.2F2H
thanks as always for the support, now when I turn on the decoder I do not take the network settings and It goes in crash.
No jeansmaria that is a setting for diseq switching, Using LNB 3 for tuner A.
I have ooenatv 6.4 on a box and had a go at setting up for dual here is a pic to give you the idea. I no longer use diseq so memory poor.
6.4 is old now, did box come with that loaded on it?
you should do a pic of your configuration as you may have missed a step
I see a configuration tuner advanced and in this mode i set my motorized sistem
I have motorised and have never used such a configuration. USALS is the method used now,
but as suggested post a few pics.
In fact as the friend peterfree posted my setting is equal to his keeping only hotbird and astra
the only differenze is the firmware ( ATV 6.4 )
Do you have a motorised dish or a fixed dish with two LNBs?
Everybody is posting examples of what to set tuners as, the important thing is what you are setting them as. Please upload pictures of what you have set.
HI,
I have 1 satellite dish with 4 LNBs.....13E+19E+5W+9E
I have 2 stations with 2 different decoders on the Dream 4 Lnb room they work at 100x100
in the studio I have 1 sat always from the same dish where I often do tests and backups that I make available to users who know me... ok.. I haven't had this hobby for 1 year,
and now I'm making the dream 800se which has just been released on the site with ATV 6.4 I want to make a backup and post it ok.
We are trying to help jeansmania in this thread. If you have an issue, please start your own thread.
The golden rule of tuner configuration is that it must match the hardware connected to the tuner.
zgemmah9.2h this box spec says only 1 sat tuner so it should be a simple Port A and Port B setup but OP is not giving enough information.
@piterfree you are way off topic so delete your posts and start a new separate thread
Don’t have an account yet? Register yourself now and be a part of our community!