You success.. i cant upload the cfe filr, but eems no suppert here anymore-- only questions- i hope somebody will respond to you.. btw. did you checked the voltages- where need to..
Need info on VU+ JTag Broadcom Tools ( Solved )
- rayq333
- Thread is marked as Resolved.
-
-
Could you please detail about voltages? Which ones? I do have the cfe file, the one posted in this forum together with the BBS tool. Is not good?
All
Does anyone know what offset should be used when flashing the NAND with BBS3? Is it 0x00000000?You success.. i cant upload the cfe filr, but eems no suppert here anymore-- only questions- i hope somebody will respond to you.. btw. did you checked the voltages- where need to..
-
hello,
to me, and 'came the same jtag, but the important thing is not' a single image that makes seeing where they put on the motherboard correctly the 4 wires, then also the other thing on the pdf there are 2 pictures of jtag but I think they are incorrect because the positions of the wires in the nstra jTAG 4 GND and that shown in the 2 phono in my opinion does not work (I burned my jtag at the time) I'm gonna 'order another one.
-
Hi
Trying to jtag a Ultimo.
Anyone come across this error before?
I get connected fine the problem comes when selecting the flash file K9FG08U0A and then refreshing I get this error.
Device id returned from the flash: D3 does not match
Any ideas ?
-
Hi
Trying to jtag a Ultimo.
Anyone come across this error before?
I get connected fine the problem comes when selecting the flash file K9FG08U0A and then refreshing I get this error.
Device id returned from the flash: D3 does not match
Any ideas ?
Have a gut feeling the K9FG08UAO xml file is the problem.
Anyone have a later version ?
-
Hello everyone,
I would like to know if I were able to upload the cFe_UNO.zip file with JTAG into the receiver? Sure thing after its decompression :) As I can see this it's UNO's bootloader so it seems like there's no problem with it.Thank you.
-
Does any one have the Samsung K9K8G08U0D.xml file ?
This is i think the correct file for the flash nand in the ultimo not the one quoted in the VU.pdf guide.
regards
-
Does any one have the Samsung K9K8G08U0D.xml file ?
This is i think the correct file for the flash nand in the ultimo not the one quoted in the VU.pdf guide.
regards
Yes, is what I have in my unit. You might find some Ultimo with K9F8G08U0M as well. make sure what NAND you have in the unit first.
-
hello, i have bcm96361 in my router and i wont to try to use studio3 fo read and write nand flash ,nand is in list and supported by studio3 but wath config i use for 6361? is possible?
-
verify the data sheet from your memory that you have on your board , and compare with the data sheet for memory that Broadcom studio3 selected from Flash list, when program give you CONNECTED.
between this 2 memories , in data sheet , you will find some difference on ID marker
generate in Flash folder, a new XML. file for your new memory that will be corected , with new Marker.after that, the error need to not reappear.
but you need to modify the XML for this memory to fit to what you have on your board
========================
<?xml version="1.0" encoding="utf-8" ?>
- <Flash maker="Samsung" name="Samsung K9F1G08U0A" type="NAND" technology="SLC">
<Command type="Nand" programmode="Block" maxbyte="2048" />
- <ID><Maker maxbyte="1" offset="0x00">0xEC</Maker>
- <Device maxbyte="1">
<DevId offset="0x01">0xF1</DevId>
</Device>
</ID>
<Size unit="gbit">1</Size>
- <Sector uniform="true" secure="false">
<MaxSector>1024</MaxSector>
<Size unit="kbyte">128</Size>
</Sector>
</Flash>======================================
look very - closer on the code of the version of the memory that you have on board, and find the data sheet for her, and produce your XML - using the example posted already
after that , the broadcom studio will communicate with processor from board , and the back-up can become .
check for revision of this memory , and for modifications , after revisions.
see
page 29
page 352af3defd6d2c17c.jpgDear All,
i reading your post here, got a lot of help-
but:
shortly: its solo
broadcom studio : CONECTED. right samsung flash selected,
but after i press refresh on flash explorer i got error message:"maker id returned from the flash:0 doeas not match.. "
so i cant upload the cfe.bin..can anybody help?
thx
_ -
please, I'm not an expert . I have ST NAND512W3A nand and bcm96361 ,wat can i do...please can you help me step by step for configure studio3:09:
-
please, I'm not an expert . I have ST NAND512W3A nand and bcm96361 ,wat can i do...please can you help me step by step for configure studio3:09:
you need this
1. plugin for your processor --- bcm96361
2. in program files> Broadcom> Broadcom studio3> Flashes-- you need to add the definition of XML file for your memory ST NAND512W3A, and this XML need to be correct madeopen program Broadcom studio3
go to
TOOLS>Device Manager> ADD { plugin for your processor }
after
View>> DEVICES> PLUG IN {bcm96361}and start
select your interface type - SPI , I2C , usb, etc
start to play
==================
<?xml version="1.0" encoding="utf-8" ?>
- <Flash maker="ST" name="ST NAND512W3A" type="NAND" technology="SLC">
<Command type="Nand" programmode="Block" maxbyte="512" />
- <ID>
<Maker maxbyte="1" offset="0x00">0x20</Maker>
- <Device maxbyte="1">
<DevId offset="0x01">0x76</DevId>
</Device>
</ID>
<Size unit="mbit">512</Size>
- <Sector uniform="true" secure="false">
<MaxSector>4096</MaxSector>
<Size unit="kbyte">16</Size>
</Sector>
</Flash>======================
but you need the bcm96361 plugin - to start playing -
Does any one have the Samsung K9K8G08U0D.xml file ?
This is i think the correct file for the flash nand in the ultimo not the one quoted in the VU.pdf guide.
regards
let's give some help here.
you always need to check the NAND data that you have on board, and to check for revisions. Also you need to read technical news regarding NAND writting, and reading -
<?xml version="1.0" encoding="utf-8"?>
<Flash maker="Samsung" name="Samsung K9F1G08R0A" type="NAND" technology="SLC">
<Command type="Nand" programmode="Block" maxbyte="2048"/>
<ID>
<Maker maxbyte="1" offset="0x00">0xEC</Maker>
<Device maxbyte="1">
<DevId offset="0x01">0xA1</DevId>
</Device>
</ID>
<Size unit="gbit">1</Size>
<Sector uniform="true" secure="false">
<MaxSector>1024</MaxSector>
<Size unit="kbyte">128</Size>
</Sector>
</Flash> -
<?xml version="1.0" encoding="utf-8"?>
<Flash maker="Samsung" name="Samsung K9F1G08U0A" type="NAND" technology="SLC">
<Command type="Nand" programmode="Block" maxbyte="2048"/>
<ID>
<Maker maxbyte="1" offset="0x00">0xEC</Maker>
<Device maxbyte="1">
<DevId offset="0x01">0xF1</DevId>
</Device>
</ID>
<Size unit="gbit">1</Size>
<Sector uniform="true" secure="false">
<MaxSector>1024</MaxSector>
<Size unit="kbyte">128</Size>
</Sector>
</Flash> -
<?xml version="1.0" encoding="utf-8"?>
<Flash maker="Samsung" name="Samsung K9F2G08R0A" type="NAND" technology="SLC">
<Command type="Nand" programmode="Block" maxbyte="2048"/>
<ID>
<Maker maxbyte="1" offset="0x00">0xEC</Maker>
<Device maxbyte="1">
<DevId offset="0x01">0xAA</DevId>
</Device>
</ID>
<Size unit="gbit">2</Size>
<Sector uniform="true" secure="false">
<MaxSector>2048</MaxSector>
<Size unit="kbyte">128</Size>
</Sector>
</Flash> -
<?xml version="1.0" encoding="utf-8"?>
<Flash maker="Samsung" name="Samsung K9F2G08U0A" type="NAND" technology="SLC">
<Command type="Nand" programmode="Block" maxbyte="2048"/>
<ID>
<Maker maxbyte="1" offset="0x00">0xEC</Maker>
<Device maxbyte="1">
<DevId offset="0x01">0xDA</DevId>
</Device>
</ID>
<Size unit="gbit">2</Size>
<Sector uniform="true" secure="false">
<MaxSector>2048</MaxSector>
<Size unit="kbyte">128</Size>
</Sector>
</Flash> -
<?xml version="1.0" encoding="utf-8"?>
<Flash maker="Samsung" name="Samsung K9LBG08U0M" type="NAND" technology="MLC">
<Command type="Nand" programmode="Block" maxbyte="4096"/>
<ID>
<Maker maxbyte="1" offset="0x00">0xEC</Maker>
<Device maxbyte="1">
<DevId offset="0x01">0xD7</DevId>
</Device>
</ID>
<Size unit="gbit">32</Size>
<Sector uniform="true" secure="false">
<MaxSector>8192</MaxSector>
<Size unit="kbyte">512</Size>
</Sector>
</Flash> -
<?xml version="1.0" encoding="utf-8"?>
<Flash maker="Samsung" name="Samsung KFG4GH6U4M" type="OneNAND">
<Command type="OneNand" programmode="Block" maxbyte="4096"/>
<ID>
<Maker maxword="1" offset="0x00">0x00EC</Maker>
<Device maxword="1">
<DevId offset="0x02">0x0255</DevId>
</Device>
</ID>
<Size unit="mbit">4096</Size>
<Sector uniform="false" secure="false">
<MaxSector>1024</MaxSector>
<Size unit="kbyte">512</Size>
</Sector>
</Flash> -
<?xml version="1.0" encoding="utf-8"?>
<Flash maker="Samsung" name="Samsung KFG1216U2B" type="OneNAND">
<Command type="OneNand" programmode="Block" maxbyte="2048"/>
<ID>
<Maker maxword="1" offset="0x00">0x00EC</Maker>
<Device maxword="1">
<DevId offset="0x02">0x0025</DevId>
</Device>
</ID>
<Size unit="mbit">512</Size>
<Sector uniform="true" secure="false">
<MaxSector>512</MaxSector>
<Size unit="kbyte">128</Size>
</Sector>
</Flash>
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!