Intelsat 19 PowerVu Keys Needed Please

Hi could anyone please help me with a current set of powervu keys for intelsat 19

thank you for that. Do I just copy and paste this as is into softcam.key file and reboot oscam

thankyou so much

i am getting good messages now from oscam saying it has found the channel however my screen is still black. i don't know If there is any section in here not needed or needs to be added

i have got this in my log now but am using oscam as cardserver , should i also be using cccam or mgcamd as softcam so i can use nline or can i place an N line in oscam if possible because i would like to share it to other 2 boxes in the house in other rooms and if so could you please advise me on how to do that.

If anyone could please have a quick look below at my log from oscam and my configs are under it and please let me know where i have gone wrong.

oscam log2017/10/24 09:26:08 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:80197E8822D1B3CEB32EBD9D28A8320B): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:09 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:8E0A873801B51C2C060787C8D8AE6D45): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:10 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:5D627B299E0ED5B386F0332C82E25C61): found (10 ms) by emulator - TLC Australia2017/10/24 09:26:11 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:2A9174F90CC98A82B4761450C79E1463): found (18 ms) by emulator - TLC Australia2017/10/24 09:26:12 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:BA4505D326C18B1B2EC6B579894FDDFA): found (8 ms) by emulator - TLC Australia2017/10/24 09:26:13 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:08640A0ED988C9F924462F46DFD1200A): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:14 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:43C5D8301D7243F5B18BE6AE81A23A0C): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:15 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:1ADB3B9F1F7DD1692335B3C8DCC509E5): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:16 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:F82EB5ACC4794C6F546AAAC4857EF334): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:17 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:84AB03FE5301B0F989C3668486336175): found (9 ms) by emulator - TLC Australia

oscam.conf

[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[newcamd]
port = 10001@090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1

[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1

[webif]
httpport = 8888
httpuser = XXXXXX
httppwd = XXXXXX
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
http_status_log = 1

oscam.user

[account]
description = dvbapi
user = linuxsatsupport
group = 1

oscam.server

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

CCcam.cfg

#SMARTCARD CLOCK FREQUENCY: / dev / sci0 6000000
#CAMKEY: / dev / sci0 00 00 00 00 00 00 00 00
#CAMDATA: / dev / sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#TRY ALL CHIDS: / dev / sci0
#
N: 127.0.0.1 10001 linuxsatsupport 01 02 03 04 05 06 07 08 09 10 11 12 13 14

or

Mgcamd - Newcamd.list

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS= 127.0.0.1 10001 linuxsatsupport 01 02 03 04 05 06 07 08 09 10 11 12 13 14

thanking you in advance

i was under the impression that dm800se did not need it

Also am i missing anything else in my configs. could you advise me please or do i have to remove anything

thankyou so much it fired up straight away

can i please ask is there any thing in my configs i should not have there,

I would like to make an nline to my other box in the bedroom ,

are all my other settings correct and should i use cccam or mgcamd on the other box which is connecting

thankyou again so much i am so wrapped

yeah i am so wrapped ... i can't thank all you guys enough, yourself Inspiral , Master G , Eak Dumnern , Sun35, Georgeflu, Prophet, Paulus, and everyone else as well i hope i havn't missed out on anyone.

All i need to do now is connect via nline which i know how to do however am not sure if my configs are correct because the way i know is without dvapi and using cccam or oscam to connect fr0m other receiver via N: Line or CWS via mgcamd.

I just don't know right now because i am not using anything in softcam only oscam is set as cardreader/server and dvapi is doing the work.

If any of the guys could please check my configs which i have attached and please let me know what i have to do and hopefully it will all work out for me.

Thanks again everybody :)

PowerVu Configs Working CBand.rar

p.s. configs are for Intelsat19 (C-Band)