Hi could anyone please help me with a current set of powervu keys for intelsat 19
Intelsat 19 PowerVu Keys Needed Please
-
- Powervu Keys Support
- mcmuzzy
- Thread is marked as Resolved.
-
-
166E (Intelsat 19)
3980 H 30000 2/3
Eurosport 1 Asia HD & Eurosport News
Discovery Channel New Zealand, Discovery Science Australia & New Zealand, Animal Planet New Zealand,
Discovery Kids Australia & New Zealand, TLC Australia, Discovery Kids Southeast Asia HD,
Animal Planet Australia, Discovery Turbo New Zealand,
P 0000 01 211214410FD467 ;[3760V,3980H] 10.09.2016166E (Intelsat 19)
4040 V SR 30000 3/4
Discovery Kids Philippines(SD) & Load(Eve SEA), Discovery Science Southeast Asia, DMAX Southeast Asia, Animal Planet Southeast Asia
Discovery Channel Southeast Asia, TLC Southeast Asia,
Discovery Channel Taiwan
P 0000 01 459C747E1BC828 ;[4040V] 10.09.2016
P 0000 01 9710BD1BBDD408 ;[4080V] 10.09.2016Intelsat 19 – 166 E
4080 V 28270
(Discovery Channel Malaysia, Discovery Japan HD, Animal Planet Japan HD, Hits HD, Discovery Turbo Max, TLC Malaysia, Discovery HD World SEA, Discovery Channel China)
01 = 37 DB 47 EB 74 EF ED 13.07.2016[166.0°E_DISCOVERY-ASIA] #166.0°E
3760-V-30000 // (Discovery Networks Asia-Pacific)
01 = 72 3A BA A3 DD C0 19 13.07.2016ESPN Australia
IntelSat.19 166.E
Tp: 3940 H 27690
MPEG.2/SD PowerVu
00. 16DE199DA44BD4
01. ACF70F8EB19865 -
thank you for that. Do I just copy and paste this as is into softcam.key file and reboot oscam
-
-
thankyou so much
i am getting good messages now from oscam saying it has found the channel however my screen is still black. i don't know If there is any section in here not needed or needs to be added
i have got this in my log now but am using oscam as cardserver , should i also be using cccam or mgcamd as softcam so i can use nline or can i place an N line in oscam if possible because i would like to share it to other 2 boxes in the house in other rooms and if so could you please advise me on how to do that.
If anyone could please have a quick look below at my log from oscam and my configs are under it and please let me know where i have gone wrong.
oscam log2017/10/24 09:26:08 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:80197E8822D1B3CEB32EBD9D28A8320B): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:09 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:8E0A873801B51C2C060787C8D8AE6D45): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:10 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:5D627B299E0ED5B386F0332C82E25C61): found (10 ms) by emulator - TLC Australia2017/10/24 09:26:11 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:2A9174F90CC98A82B4761450C79E1463): found (18 ms) by emulator - TLC Australia2017/10/24 09:26:12 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:BA4505D326C18B1B2EC6B579894FDDFA): found (8 ms) by emulator - TLC Australia2017/10/24 09:26:13 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:08640A0ED988C9F924462F46DFD1200A): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:14 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:43C5D8301D7243F5B18BE6AE81A23A0C): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:15 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:1ADB3B9F1F7DD1692335B3C8DCC509E5): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:16 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:F82EB5ACC4794C6F546AAAC4857EF334): found (9 ms) by emulator - TLC Australia2017/10/24 09:26:17 7F0D47A7 c (ecm) linuxsatsupport (0E00@000000/0000/0588/40:84AB03FE5301B0F989C3668486336175): found (9 ms) by emulator - TLC Australia
oscam.conf
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox[newcamd]
port = 10001@090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1[webif]
httpport = 8888
httpuser = XXXXXX
httppwd = XXXXXX
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
http_status_log = 1oscam.user
[account]
description = dvbapi
user = linuxsatsupport
group = 1oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000CCcam.cfg
#SMARTCARD CLOCK FREQUENCY: / dev / sci0 6000000
#CAMKEY: / dev / sci0 00 00 00 00 00 00 00 00
#CAMDATA: / dev / sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#TRY ALL CHIDS: / dev / sci0
#
N: 127.0.0.1 10001 linuxsatsupport 01 02 03 04 05 06 07 08 09 10 11 12 13 14or
Mgcamd - Newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS= 127.0.0.1 10001 linuxsatsupport 01 02 03 04 05 06 07 08 09 10 11 12 13 14thanking you in advance
-
-
i was under the impression that dm800se did not need it
Also am i missing anything else in my configs. could you advise me please or do i have to remove anything
-
try like this in oscam.conf
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox
-
thankyou so much it fired up straight away
can i please ask is there any thing in my configs i should not have there,
I would like to make an nline to my other box in the bedroom ,
are all my other settings correct and should i use cccam or mgcamd on the other box which is connecting
thankyou again so much i am so wrapped
-
hi
masterG & the other guys here, be better for a reply on this now m8, i amm not good with Oscam config setups
Glad you up & running ;-)
enjoy bud
-
yeah i am so wrapped ... i can't thank all you guys enough, yourself Inspiral , Master G , Eak Dumnern , Sun35, Georgeflu, Prophet, Paulus, and everyone else as well i hope i havn't missed out on anyone.
All i need to do now is connect via nline which i know how to do however am not sure if my configs are correct because the way i know is without dvapi and using cccam or oscam to connect fr0m other receiver via N: Line or CWS via mgcamd.
I just don't know right now because i am not using anything in softcam only oscam is set as cardreader/server and dvapi is doing the work.
If any of the guys could please check my configs which i have attached and please let me know what i have to do and hopefully it will all work out for me.
Thanks again everybody :)
PowerVu Configs Working CBand.rar
p.s. configs are for Intelsat19 (C-Band)
-
yeah i am so wrapped ... i can't thank all you guys enough, yourself Inspiral , Master G , Eak Dumnern , Sun35, Georgeflu, Prophet, Paulus, and everyone else as well i hope i havn't missed out on anyone.
All i need to do now is connect via nline which i know how to do however am not sure if my configs are correct because the way i know is without dvapi and using cccam or oscam to connect fr0m other receiver via N: Line or CWS via mgcamd.
I just don't know right now because i am not using anything in softcam only oscam is set as cardreader/server and dvapi is doing the work.
If any of the guys could please check my configs which i have attached and please let me know what i have to do and hopefully it will all work out for me.
Thanks again everybody :)
PowerVu Configs Working CBand.rar
p.s. configs are for Intelsat19 (C-Band)
Hi , can you share new powervu solved Intelsat 19 tp 4040 v 30000 ? thanks.
-
this is intelsat19 key for today..
P 0000 00 000A77FCE3E5EB;1660:04040:30000:V
P 0000 01 CA2D09055BDAD1;1660:04040:30000:V
-
Hi McMuzzy.
Hey do you still have IS19 running via Oscam..
Ive just started to attempt to configure Oscam on a Zgemma box and are not having to much luck.
Below is a copy of what my Log is saying..
Would you know whats going on ?.. Is it something in my DVBapi config ?
I have my Config the same as the example above - extended_cw_api = 2
dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument2019/08/06 21:22:44 481F8612 c (-) -- Skipped 1 duplicated log lines --2019/08/06 21:22:44 481F8612 c (ecm) anonymous (0E00@000000/0000/0017/40:1303F7C0E62D22C58DA75D7CA397143C): found (1 ms) by emulator - TV5 Monde Pacifique HDWould be good to catch up.. Im in Nz too,,, -
Who can explain, the effect of key , i am stupid ,
Is it used to open more channels?
-
Can have espn pacific powervukey Intelsat19 thanks
Softcam Keys Support Forum
Configs, Downloads, Tools, Biss Feed Keys, Regular Feed Keys, Softcam Keys, Encrypted Feeds, Feed Hunter, Biss & Powervu Encrypted Feeds.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!