can anyone give me the lamedb from their vix image please so i can check it against this one I have here , as soon as I do ABM maker it knocks more channels off lol
zgemma audio description virgin media
- tommy12
- Thread is marked as Resolved.
-
-
here you go
-
thankyou appreciated
-
actually pcr setting in lamedb is what is the issue,!!! the pcr is normally set to the same value as v-pid aka video carrier ,,,, when infact virgin has changed the pcr to now be the same as audio pid ,, the reason oscam works is because it sorts the pids correctly. therfore demuxs video from the audio and sets pcr via cam.. dont ask how im reading up on this matter,, it seems pids are set in such a way,,,
1 - video pid
2 - audio pid mpeg3 - unshure
4 - audio pid ac3
5 - unshure
6 - unshure
7 - unshure
8- unshure
9- unshure
somewhere i have actually seen the pid layouts,,!!
but in the new working pids in lamedb for sky sports mainevents hd,, are like so
SkySports MainEventHD
p:Unknown,c:00006d,c:020097,c:03006d,c:040083,C:0000,f:05
0c82:ffff0000:0020:f020:25:0
p:unknown = virgin
now the next linec:00006d
c:020097 = audio last 3 digits from hex to decimal c:020 097- we want
just these 3 hex symbols to convert = 151 this is actually mpeg audio
the line that starts c:40083 is the ac3 pid which is a52-ac3 as above the 3 last digits again c:040 083-we want these to convert from hex to decimal these 3 symbols converted = 131 this is ac3 what i have noticed is video pid is missing in this line,,, so maybe try add line like so, as i do know 109 is the video pid for this channel..
this is all in lamedb based in openatv image is etc/enigma2 folder. which is bouquets folder.
-
is there an idiots guide please sir on how to do this .as i am one of them idiots .iam using a vu solo 4k oscam
-
actually pcr setting in lamedb is what is the issue,!!! the pcr is normally set to the same value as v-pid aka video carrier ,,,, when infact virgin has changed the pcr to now be the same as audio pid ,, the reason oscam works is because it sorts the pids correctly. therfore demuxs video from the audio and sets pcr via cam.. dont ask how im reading up on this matter,, it seems pids are set in such a way,,,
1 - video pid
2 - audio pid mpeg3 - unshure
4 - audio pid ac3
5 - unshure
6 - unshure
7 - unshure
8- unshure
9- unshure
somewhere i have actually seen the pid layouts,,!!
but in the new working pids in lamedb for sky sports mainevents hd,, are like so
SkySports MainEventHD
p:Unknown,c:00006d,c:020097,c:03006d,c:040083,C:0000,f:05
0c82:ffff0000:0020:f020:25:0
p:unknown = virgin
now the next linec:00006d
c:020097 = audio last 3 digits from hex to decimal c:020 097- we want
just these 3 hex symbols to convert = 151 this is actually mpeg audio
the line that starts c:40083 is the ac3 pid which is a52-ac3 as above the 3 last digits again c:040 083-we want these to convert from hex to decimal these 3 symbols converted = 131 this is ac3 what i have noticed is video pid is missing in this line,,, so maybe try add line like so, as i do know 109 is the video pid for this channel..
this is all in lamedb based in openatv image is etc/enigma2 folder. which is bouquets folder.
Here is a pid list for enigma2:
0 VIDEO_PID
1 AUDIO_PID
2 TXT_PID
3 PCR_PID
4 AC3_PID
5 VIDEOTYPE
6 AUDIOCHANNEL
7 AC3_DELAY
8 PCM_DELAY
9 SUBTITLE_PID -
cheers jenseneverest,, looked everywhere lol haha. thanks, seen it last night like a wally forgot to store page
-
iv give up when I think im getting somewhere it goes back to how it is now?
-
yeah same here , after reboot the details are changing in the lamedb
\
-
ok made a possible easier fix , working on atv
ssh to box and run this cd /bin && wget http://smashguide.ddns.net/audio/channels.sh && chmod +x channels.sh && ./channels.sh
Worked so far onATV 5.3 , 6.0 and 6.1
-
cd /bin && wget http://smashguide.ddns.net/audio/channels.sh && chmod +x channels.sh && ./channels.sh
-
As a test in any black screen channels scenario,,, extract your list/save and look at it those channels in dcc///
UNTICK THESE
K (Keep): Do not automatically update the services's parameters(dxNoSDT)
P (Use PIDs):Always use the cached instead of current PIDs (dxNoDVB)
Save and write channel list back to box and restart settings.
You should recieve a picture again on any black screen channels if you edited like i advised above,,,if no sound then open vlc/stream channel to pc and look at broadcasted ac3 output codec,,add this to ac3 box in dcc...
Remove mpeg info if its there and add video pid from vlc to video and pcr if not there and TICK BOXES AGAIN,,,,save and write to box.
May seem longwinded and a bit confusing but it should do the the trick.
-
were is the softcams for atv and ABM I can never set this image up, tecnomate nano se h2 plus.
thanks.
ps
i read somwhere i theres a backup image all setup with this prob sorted for the zgemma lc
-
my instructions work I have tried it on 3 devices now Zemma H2 , Zgemma H2H and Amiko alien mini shd (amiko 5900)
I am making an ipk i will post it when i have done
-
For ATV 6.0 < use 1.0 , for 6.0 > use universal 2.0
-
Sorry the above files are for Open ATV . Once downloaded in the plugins menu an option for Softcams will have appeared . Choose Oscam ATV latest and install . The Webif will be contactabe on http://box.ip.address:83 . Sealions and New Sealions go in the Readers section and don't forget to update the DVBapi user as well with the correct group and CAID. I have posted earlier in this thread how to do Oscam .
-
Thanks smashingtv your fix worked for me, I had to find what ssh meant first though.
-
I ran the fix the box restarted but still doesn't work, when running the script again I now get "wget: can't open 'channels.sh': File exists"
-
when running the script again I now get "wget: can't open 'channels.sh': File exists"
Thats because the script is still in the folder bin. FTP to bin and delete channels.sh then try again.
-
it sorted some channels out but blacked out others
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!