help flashing image on zgemma h2s

Some people have had some luck just pressing random buttons on your remote when this happens. Turn it on and off and the back and just press some buttons.

Other things to try...

Turn it of at the mains for a while.

Try re-flashing with a clean image first, before installing a backup build.
http://images.mynonpublic.com/…/index.php?open=zgemmah2s

after that you will probably have to try a bootloader. (which can brick your box completely if you mess that up)

Zgemma Star Bootloader for H.S - H2H - H2S ----- (the H3 models only)

reformat the usb key wont do it any harm then grab an image for the H2 from this link below

http://www.zgemma.tv/index.php?folder=WmdlbW1hLUguMlM=

put in back usb power on box and press power button on front of box once and it should start flashing box wait till everything is finished then should be ok..

if you have done it to 2 boxes, I would get yourself a genuine descent usb stick. Sounds like its a dodgy fake usb to me. Which might be why the flash is completely failing

Well if they are genuine sticks and not fleebay snides. you can always try cleaning your usb ports with a cotton bud. Some of these boxes are known for dodgy usb ports. Personally never had a problem with usbs myself though.

Are you not even getting the FLSH or USB message on the front of your box.