Ncam-reloaded

**W@Rp** · Nov 18th 2017

Ncam-reloaded

The following ipk file is the softcam `ncam-reloaded version 1.6 release 1`. It is built for: Vu+ solo4k with OpenPLi 6.

Main features: Fast zapping, web interface (on port 17001) refreshes every 15 seconds.

The config files will be installed in /etc/tuxbox/config/mohncam; in this way all your config files in /etc/tuxbox/config stay untouched.

Following is useful, but not necessary:

In case you don't see the channel name/provider in the web interface you should clean the content of ncam.srvid2. You can clean => erase the content of that file in the web interface as shown in image_2.png or go to /etc/tuxbox/config/mohncam and open that file, erase all it's content and save. it will be filled with the channel names when you zap.

tnx.carloscarlos

tested on satdreamgr 5.0 Oktagon SF4008 hk

MAJOOR · Nov 18th 2017

Work fine on octagon sf4008 4k !!

Thanks

**W@Rp** · Nov 26th 2017

Ncam-reloaded

Here is the version of ncam-reloaded version 1.6 release 1 for Vu+solo4k with OpenATV-6.

All the config files will be installed in /var/keys/mohncam ;
in this way all your config files in /var/keys will stay untouched.

NOTE: The port of web interface h***://your.box.ip is 8888, and there is no username, no password

**W@Rp** · Nov 30th 2017

Ncam-reloaded v.1.6r1

for the MIPS architecture It is compiled for openATV-6 image.

**W@Rp** · Dec 2nd 2017

Ncam-reloaded v.1.6r1

for the MIPS architecture, It is compiled for Open Black Hole image.

vusolo2+openBH, other info inside the zip file.

**carloscarlosa** · Dec 2nd 2017

Hi to all

I am glad that these helped you.

For other image/hardware configuration you want it for, just give more info and I will recompile it .

carloscarlosa

xingchong · Dec 2nd 2017

Master can help to be a fit openpli-4-dm800se it, thank you. Recently 91.5nba can not find the key, thank you

**carloscarlosa** · Dec 2nd 2017

Hi

Do you want the plugin for openPLi-4 on dm800se?

carloscarlosa

xingchong · Dec 3rd 2017

9ae65153e022621a01c51e.jpg

29b4d31c80aa0.jpg

9ae65153e022621a01c51e.jpg

29b4d31c80aa0.jpg

1e3b50b130a98a64918dc.jpg

;(

**carloscarlosa** · Dec 3rd 2017

Hi,

Here is Ncam-reloaded v1.6r1 dm800se and boxes (mipsel) alike with openPLi-6 installed.

webif: 17001

config files will be installed in: /etc/tuxbox/config/mohncam

Filename: enigma2-plugin-softcams-ncam-moh_1.6-moh-r1-Reloaded_mipsel.zip

md5sum checksum:

4216f83b6441d9b72d148ee134d8a14f enigma2-plugin-softcams-ncam-moh_1.6-moh-r1-Reloaded_mipsel.zip

Hope this helps.

carloscarlosa.

**carloscarlosa** · Dec 3rd 2017

Hi,

Here is:

Ncam-reloaded v1.6r1 for arm-cortex_A15 and boxes alike with openPLi-6 installed.

Example: Mutant hd51

webif: 17001

config files will be installed in: /etc/tuxbox/config/mohncam

Filename: enigma2-plugin-softcams-ncam_1.6r1-Reloaded-openpli_armv7ahf-cortex-a15.zip

ipk md5sum checksum: fed3207925c8ffb76ed7377d8a35be69

LiskoFINAL · Dec 4th 2017

Hi, thank you very much for your work! Are the sources available?

**carloscarlosa** · Dec 4th 2017

Quote from LiskoFINAL

Hi, thank you very much for your work! Are the sources available?

Hi, thank you very much for your interest.

Not yet! I have a whole mess of source file tree!

ginntonic · Dec 7th 2017

I'äm interested in the source code as well - and i am used to understanding source code mess :-)

iqbalbhawana · Dec 7th 2017

Quote from enigma1969

Ncam-reloaded v.1.6r1

for the MIPS architecture, It is compiled for Open Black Hole image.

vusolo2+openBH, other info inside the zip file.

Cannot install it on open blackhole 4.1 image on vu Solo2 .

**carloscarlosa** · Dec 7th 2017

Hi iqbalbhawana

Thanks for the feedback, much appreciated, I will investigate open blackhole 4.1 and see whatt has changed.

carloscarlosa

**carloscarlosa** · Dec 13th 2017

Ncam-reloaded v1.7-r2 for Linux x86_x64 (64bits)

if you have VDR installed in your PC download the the config files for VDR

Filename: Ncam-reloaded_config-files-for-VDR.zip

N.B For the latest/recent build please check the last page.

carloscarlosa.

**carloscarlosa** · Dec 15th 2017

Hi linuxmen/women

Here is Ncam-reloaded V.-1.7r2 for armv7-vpn-neon, e.g. Vu+Solo4k (and 4k alike), compiled for open BlackHole-4.1-... /BlackHole

* webif port: 17001

* No username, nor pass required

Filename:
enigma2-plugin-softcams-ncam-reloaded_1.7r2-blackhole_armv7ahf-vfp-neon.ipk

md5 checksum: 1fbc036b1bd2a837d0e855292a1bfdc7

N.B For the latest/recent build please check the last page.

carloscarlosa.

**nautilus7** · Dec 15th 2017

What is changed in comparison to OSCam-Emu? Where is the source code with the modifications?

**carloscarlosa** · Dec 15th 2017

Ncam-reloaded v1.7-r2 for vusolo2 - mips32el with openBlackHole-4.1...

Filename: enigma2-plugin-softcams-ncam-reloaded_1.7r2-blackhole_mips32el.ipk

md5checksum: eadedf40a74b58b1566e0fe38cb44815

web port (webif): 17001

* security fix in openssl 1.0.2n (07 dec. 2017)

* static link to openssl

N.B For the latest/recent build please check the last page.

carloscarlosa.

Ncam-reloaded

Your resource for Ncam softcam.

Share

Tags

LinuxSat Community

Firmware Images

Receiver Support

Plugins & Tools

Resources