I trying to use NCAM 4.0 to see SRG Suisse and also with last softcam.key present on this forum...but nothing no cw arriving ?
The NCam seem run well ...Someone can you help me ?
Thank
I trying to use NCAM 4.0 to see SRG Suisse and also with last softcam.key present on this forum...but nothing no cw arriving ?
The NCam seem run well ...Someone can you help me ?
Thank
go to NCAM webif and check files/other files/ softcam.key , if the ncam reads the softcam.key. if not, just copy (from your softcam.key) /paste to this area, save and restart ncam.
go to NCAM webif and check files/other files/ softcam.key , if the ncam reads the softcam.key. if not, just copy (from your softcam.key) /paste to this area, save and restart ncam.
Thank i go in files/other files/ softcam.key and i see keys... but no vision (i use 1.5 official)
I use SOFTCAM & MR KEYS UPDATE BY INFORMED® (24-12-2017)
Hispa
i am not using ncam,so i can't help you deep, but try a newest (and maybe unofficial) version of the plugin...
i am not using ncam,so i can't help you deep, but try a newest (and maybe unofficial) version of the plugin...
You speak ragarding NCam 4.0 ?
Hispa
the emu for those channels,should work from first version (it is something old,nothing changed).
but i don't know,if the official version,is somehow "clean" or something. if you will try a new one (4.0 ,3.9 ,...3.1) will show something (picture or infos).
the emu for those channels,should work from first version (it is something old,nothing changed).
but i don't know,if the official version,is somehow "clean" or something. if you will try a new one (4.0 ,3.9 ,...3.1) will show something (picture or infos).
Thank i set all ok in emu NCAM 4.0 but also with correct keys no vision ...where is the problem ?
Thank
Hispa
what the log shows?
i just did a quick check,and it works in ncam 4.0 !
it work with Ncam 4.0 & oscam-emu 11397
bed676ef.jpg6e50dffb14cc90c.jpg
do you have this with red ?
QuoteDisplay More[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
caid = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
go to the webif and look under softcam if any are in it
possibly in the wrong place
softcam.key under usr/keys
ncam under etc/ tuxbox / config
Had the same problem as I wrote here:Ncam 3.6 compiled and patched by marouan & RAED
Changed softcam key and problem was solved. Maybe if you change the softcam key your problem will be solved too.
This is my file
# ncam.server generated automatically by NCAM
####################### SoftCams ############################
[reader]
label = myemulator
protocol = constcw
device = /usr/keys/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
[reader]
label = myconstantcw
protocol = constcw
device = /usr/keys/constant.cw
Caid = 2600,0B00,0500,0963,06AD
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
#Ident = 2600: 000000; 0B00: 000000; 0500: 032830; 0963: 000000; 06AD: 000000
Group = 1
#caid = 2600
#group = 3
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
caid = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
####################### CCcam ############################
####################### Ncamed ############################
[reader]
label = server2
enable = 0
protocol = newcamd
device = host,port
key = 0102030405060708091011121314
user = user
password = pass
fallback = 1
group = 1
####################### Gbox ############################
[reader]
label = server3
enable = 0
protocol = gbox
mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}}
group = 3
caid = 0300
#########################################################
[reader]
label = oscam_emu
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604,0648,0D98,0650,0D95,0E00,1FFF,2600
detect = cd
ident = 0E00:000000,000002;0D00:000000,000004,000010,000014,000020,0000C0,000000,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A
8;0D03:000000,000004,000008,000024,000028;0D05:000004,000010;090F:000000;0500:030B00,023800,007400,007800;1801:000000;0604:000000;0D98:000000;0650:000
000;0D95:000000
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
services = !afn
[reader]
label = AFN
de--SS--ion = AFN-EMU
protocol = emu
device = Emulator
caid = 0E00
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
Display More
Its correct ?
Thank
Hispa
Thanks
Don’t have an account yet? Register yourself now and be a part of our community!