Dear all,
i purchased dm520 two days ago from dubai. now i am facing a problem that is red light blink when turn on .
on screen just write there dreambox discover more. thats it.
kindly tell me what i do ? to resolve the issue
Dear all,
i purchased dm520 two days ago from dubai. now i am facing a problem that is red light blink when turn on .
on screen just write there dreambox discover more. thats it.
kindly tell me what i do ? to resolve the issue
dear ,
after installation image. when i go in tuner configuration, its show two options
chose tuner
1: tuner A (empty)
2: tuner B (empty)
when i chose 1 or 2 , nothing done any thing.
so tell me what i do ?
ok let me check /. thanks
dear now i install the PURE2 6.2 FOR DM520/525 HD image.
now i am facing an other problem .
after installation image. when i go in tuner configuration, its show two options
chose tuner
1: tuner A (empty)
2: tuner B (empty)
when i chose 1 or 2 , nothing done any thing.
so tell me what i do ?
Try the original original image from dmm!
Dear all,
DM 520 recently purchased, there is erroe red light blinking. one friend suggested me to install orginal image from dreamboxupdate.com/. i did it but result is same red light blink and on screen msg shown dream box discover more. after that i installed some other images. its open but i face an other problem , problem is in tuner configuration.. tuner is empty.
so friends please help me what i do ?
original image is not supported its just red light blinking. and other image shown tuner empty.
waiting for reply i need help.
Thank you
Display Moredear ,
after installation image. when i go in tuner configuration, its show two options
chose tuner
1: tuner A (empty)
2: tuner B (empty)
when i chose 1 or 2 , nothing done any thing.
so tell me what i do ?
You set up the tuner while installing the image.
There must have been something wrong during the installation of the image. I have tried most of the image to 520HD and I have never got 2 options in tuner configuration.
Try reinstalling the image and configure the tuner during installation.
Display MoreDisplay Moredear ,
after installation image. when i go in tuner configuration, its show two options
chose tuner
1: tuner A (empty)
2: tuner B (empty)
when i chose 1 or 2 , nothing done any thing.
so tell me what i do ?
You set up the tuner while installing the image.
There must have been something wrong during the installation of the image. I have tried most of the image to 520HD and I have never got 2 options in tuner configuration.
Try reinstalling the image and configure the tuner during installation.
for searching of issue , i found one an other error, error is no CA found.
Display MoreDisplay Moredear ,
after installation image. when i go in tuner configuration, its show two options
chose tuner
1: tuner A (empty)
2: tuner B (empty)
when i chose 1 or 2 , nothing done any thing.
so tell me what i do ?
You set up the tuner while installing the image.
There must have been something wrong during the installation of the image. I have tried most of the image to 520HD and I have never got 2 options in tuner configuration.
Try reinstalling the image and configure the tuner during installation.
kindly share the method,how to config tuner during installation. thank you
error is no CA found.
Flashing an original image on a genuine dreambox won`t give this error, unless the box is a clone. Or you are trying a clone image on an original. PurE2 image you tried is an original.
Take off the top cover and look at the sim card. What does it show on it ?
error is no CA found.
Flashing an original image on a genuine dreambox won`t give this error, unless the box is a clone. Or you are trying a clone image on an original. PurE2 image you tried is an original.
Take off the top cover and look at the sim card. What does it show on it ?
on sim card wrote dreambox security sim a8p
i download the Latest SSL Secondstage Bootloader for DM520.
but its show in valid type file . :(
when rescue mode i got an ip address.
that ip put in my browser... its show tree option there
device information online recovery firmware upload.
when rescue mode i got an ip address.
This is normal. Which way were you flashing images before ?
Try the PurE2 image again -> PurE2 6.2 for DM520/525 HD
Once the image loads install the latest bootloader in telnet:
FTP bootloader.deb to /tmp folder then run this command in telnet then reboot dpkg -i /tmp/*deb
i used normal way for flashing image. mentioned above
can u do it for me throug team veiwer .. please
please :(
please resolve my isuue
i have the same problem !!!!!
we need help ....
Once the image loads install the latest bootloader in telnet:
FTP bootloader.deb to /tmp folder then run this command in telnet then reboot dpkg -i /tmp/*deb
There are 3 of them, which are correct to use?
dreambox-secondstage-dbg_3-dm520-r0.1_mipsel.deb
dreambox-secondstage-dev_3-dm520-r0.1_mipsel.deb
dreambox-secondstage_3-dm520-r0.1_mipsel.deb
dreambox-secondstage_3-dm520-r0.1_mipsel.deb
dreambox-secondstage_3-dm520-r0.1_mipsel.deb
i try dreambox-secondstage_3-dm520-r0.1_mipsel.deb but it doesn't work
i try dreambox-secondstage_3-dm520-r0.1_mipsel.deb but it doesn't work
Do you do that in the way master G says in post # 16?
Dear all,
i purchased dm520 two days ago from dubai. now i am facing a problem that is red light blink when turn on .
on screen just write there dreambox discover more. thats it.
i had the same problem and i solved it yesterday by hitting dream box by hand from the top and front of the red light and worked!!!!!!
try and tell me
Dear all
I have same problem, with kazuya1. Dm525 tuner empty. Install Pure 2 image, ftp on box dreambox-secondstage_3-dm520-r0.1_mipsel.deb.
root@dm525:~# dpkg -i /var/tmp/*deb
-bash: dpkg: command not found
~ Kernel 3.4-4.0-dm520 (22:33:11). Have a N.I.C.E. day on dm525 ~
pure2 6.2 dm525
dm525 login: root
Password:
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
root@dm525:~# dpkg -i /var/tmp/*deb
-bash: dpkg: command not found
Don’t have an account yet? Register yourself now and be a part of our community!