Send ipk file via FTP (e.g. via DCC or FileZilla) to tmp> / var / temp
Connect to the box via Telnet and enter the following commands:
opkg install /tmp/*.ipk
reboot
Send ipk file via FTP (e.g. via DCC or FileZilla) to tmp> / var / temp
Connect to the box via Telnet and enter the following commands:
opkg install /tmp/*.ipk
reboot
Thank You very much 👍 work great Oscam 11635 🤝
Display MoreSend ipk file via FTP (e.g. via DCC or FileZilla) to tmp> / var / temp
Connect to the box via Telnet and enter the following commands:
opkg install /tmp/*.ipk
reboot
I tried but it doesn't show up on openweb and not work
My dear friends, is C-band powervu not working?
I have tried 68.5east(HBO, CNN, and SKY news..no show), also tried 4.8east(AFN ) ..
I know someone has the solution, Kindly relief me of the stress..
After longer tests, I found a problem in the latest versions of oscam 11618 - 11635, the image freezes again and again after a few minutes of viewing for several seconds, there is nothing suspicious in the oscam log, I checked the older version 11603 and this problem does not occur here 🤔
A new changeset 11638 is out, try it
Guys, for a long time i have been saying the same thing, LOOK AT THE CHANGE LOG.
The newest, latest, shiny, oscam, and emu patch will do nothing for you..... unless there is something in the changes that will be of benefit
There has been a lot of change to oscam concerning cachex - for the most part of no use to most users....
And little has changed in the emu patch either (since July)
It would appear a fix for the recent .srvid problem is coming to the latest versions
See here for detail:
my motto never change a running system
Display MoreFull oscam binar
CodeDisplay More___ ____ ___ / _ \/ ___| / __|__ _ _ __ ___ | | | \___ \| | / _` | '_ ` _ \ | |_| |___) | |_| (_| | | | | | | \___/|____/ \___\__,_|_| |_| |_| +------------------------------------------------------------------------------- | OSCam ver: build-DreamOSat-1.20_svn rev: 11638-798 target: arm-dreambox-linux-gnueabihf-ssl-libusb-pcsc | Tools: | CROSS = /home/dreamosat/s3-git/support/toolchains/dream_arm/bin/arm-dreambox-linux-gnueabihf- | CC = /home/dreamosat/s3-git/support/toolchains/dream_arm/bin/arm-dreambox-linux-gnueabihf-gcc | Settings: | CONF_DIR = /etc/tuxbox/config | CC_OPTS = -Os -ggdb -pipe -ffunction-sections -fdata-sections | CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition | CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/PCSC -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_PCSC=1 -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/PCSC -I/home/dreamosat/s3-git/support/toolchains/dream_arm/arm-dreambox-linux-gnueabihf/sysroot/usr/include/../local/include/PCSC -DWITH_UTF8=1 -DWITH_UTF8 | LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lpcsclite -lm -lpthread -ldl -lrt | UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_PCSC=1 USE_UTF8=1 | Config: | Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CS_CACHEEX_AIO CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT CLOCKFIX WITH_EMU WITH_SOFTCAM | Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP | Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT | CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI STINGER DRECAS SMART PCSC | Compiler : arm-dreambox-linux-gnueabihf-gcc (crosstool-NG 1.24.0.175_e6e39ea) 10.2.0 | Config : build/arm-dreambox-linux-gnueabihf-ssl-libusb-pcsc/config.mak | Binary : /home/dreamosat/s3-git/support/binaries/oscam-svn11638-dream_arm-webif-dvbapi-ssl-libusb-pcsc-emu798 +-------------------------------------------------------------------------------
CodeDisplay MoreUnix starttime: 1601037173 Starttime: 25.09.2020 15:32:53 Version: oscam-build-DreamOSat-1.20_svn-r11638-798 Compiler: arm-dreambox-linux-gnueabihf-ssl-libusb-pcsc Box type: dm900 (generic) PID: 18339 TempDir: /tmp/.oscam GBox tmp_dir: not defined using: /tmp/.oscam ConfigDir: /etc/tuxbox/config/ WebifPort: 8888 Web interface support: yes LiveLog support: yes jQuery support intern: yes Touch interface support: yes SSL support: yes DVB API support: yes DVB API with AZBOX support: no DVB API with MCA support: no DVB API with COOLAPI support: no DVB API with COOLAPI2 support: no DVB API with STAPI support: no DVB API with STAPI5 support: no DVB API with NEUTRINO support: no DVB API read-sdt charsets: yes Irdeto guessing: yes Anti-cascading support: yes Debug mode: yes Monitor: yes Loadbalancing support: yes Cache exchange support: yes Cache exchange AIO support: yes CW Cycle Check support: yes LCD support: yes LED support: yes Clockfix with realtime clock: yes IPv6 support: no Emulator support: yes Built-in SoftCam.Key: yes camd 3.3x: no camd 3.5 UDP: yes camd 3.5 TCP: yes newcamd: yes CCcam: yes CCcam share: yes gbox: yes radegast: yes scam: yes serial: yes constant CW: yes Pandora: yes ghttp: yes Reader support: yes Nagra: yes Nagra Merlin: yes Irdeto: yes Conax: yes Cryptoworks: yes Seca: yes Viaccess: yes NDS Videoguard: yes DRE Crypt: yes TONGFANG: yes Bulcrypt: yes Griffin: yes DGCrypt: yes cardreader_phoenix: yes cardreader_drecas: yes cardreader_internal_azbox: no cardreader_internal_coolapi: no cardreader_internal_coolapi2: no cardreader_internal_sci: yes cardreader_sc8in1: yes cardreader_mp35: yes cardreader_smargo: yes cardreader_pcsc: yes cardreader_smartreader: yes cardreader_db2com: yes cardreader_stapi: no cardreader_stapi5: no cardreader_stinger: yes
See for other binar files.
How to install it on linux VPSserver x64 ubuntu/debian ?
wiith the last oscam bin version the restart gui need a lot of time to complete.only with reboot the box starts and oscam is ok.latest blackhole image vu uno 4k se.
Hi everyone!
Oscam 11635 are not working on Open Droid 7.0 - Dinobot 4K Plus, i try with the version enigma2-plugin-softcams-oscam_11.635-emu-r798_IPK.
Hi everyone!
Oscam 11635 are not working on Open Droid 7.0 - Dinobot 4K Plus, i try with the version enigma2-plugin-softcams-oscam_11.635-emu-r798_IPK.
I have done, but are not working.
I gonna install another image and i will try again
Ok, thanks
Display MoreHi everyone!
Oscam 11635 are not working on Open Droid 7.0 - Dinobot 4K Plus, i try with the version enigma2-plugin-softcams-oscam_11.635-emu-r798_IPK.
My image i get working now with Cccam.
do not use in every new oscam, a deb file.
Just replace the oscam bin
Thank you, now work perfectly
Don’t have an account yet? Register yourself now and be a part of our community!