extended_cw_api = 2 change to 1
The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread
-
- Various Support
- elton74
- Thread is marked as Resolved.
-
-
I changed a lot 2-1 it didn't happen again
-
I changed a lot 2-1 it didn't happen again
ok now is 1?
-
now at 1
-
Does anyone have other ideas and thoughts?
-
now at 1
if try all configuration and not work , only one solution :instal one oscam patch
-
I installed it with the Oscam patch
Nothing changed all the same in Oscam versions
-
I installed it with the Oscam patch
Nothing changed all the same in Oscam versions
on your oscam use a lot uninecesary files , clean you oscam and after try , oscam tiers?oscam gues ?USE MINIMAL OSCAM
2021/01/26 01:19:33 00000000 s (config) INFO: Cannot open file "/storage/emulated/0/oscam_install/config/oscam.provid" (errno=2 No such file or directory)
2021/01/26 01:19:33 00000000 s (config) 3 service-id's loaded in 1 ms
2021/01/26 01:19:33 00000000 s (config) INFO: Cannot open file "/storage/emulated/0/oscam_install/config/oscam.tiers" (errno=2 No such file or directory)
2021/01/26 01:19:33 00000000 s (config) INFO: Cannot open file "/storage/emulated/0/oscam_install/config/oscam.fakecws" (errno=2 No such file or directory)
2021/01/26 01:19:33 00000000 s (main) starting thread garbage
2021/01/26 01:19:33 00000000 s (main) garbage thread started
2021/01/26 01:19:33 00000000 s (config) INFO: Cannot open file "/storage/emulated/0/oscam_install/config/oscam.guess" (errno=2 No such file or directory)
2021/01/26 01:19:33 00000000 s (config) INFO: Cannot open file "/storage/emulated/0/oscam_install/config/oscam.ird" (errno=2 No such file or directory)
2021/01/26 01:19:33 00000000 s (config) INFO: Cannot open file "/storage/emulated/0/oscam_install/config/oscam.whitelist" (errno=2 No such file or directory)
2021/01/26 01:19:33 00000000 s (config) INFO: Cannot open file "/storage/emulated/0/oscam_install/config/oscam.ratelimit" (errno=2 No such file or directory)
2021/01/26 01:19:33 00000000 s (net) monitor: disabled
-
Tandberg channels on Turksat 42 satellite are resolved with emu.
-
Tandberg channels on Turksat 42 satellite are resolved with emu.
powerwu is more restrictive coded system,must be cleaned oscam ,maybe is help this ,for me i use on dm900 and is ok
Channel Config:
1. Go to the OpenWebif and click on the “Stream” button for the channel you want to add. 2. Download and save the .m3u file. 3. Open the .m3u file with a text edior and get the stream link. It looks like this: http://stb:8001/1:0:19:1234:3EF:1:C00000:0:0:0: 4. Replace the port (8001) with the relay port (default: 17999) and the host name (“stb”) with 127.0.0.1 http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0: 5. For channel list you must use DreamboxEdit (Dreamset not work) and Service ID must be in Decimal (not in HEX).
Adding the new stream link to your channel list with DreamBoxEdit:
1. Go to the list in the middle “Bouquet details”. 2. Right click on a channel, select “IPTV and other streaming services”, select “Add”. 3. Select “DVB/TS”. 4. Choose a name and use the new stream link as URL. 5. Use the “Service ID” of the original channel. You can find it in the left list (“Services”). 6. Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link. Use Transponder ID: “11”, Network ID: “22” and Namespace: “33”. 7. Set Service Type to “1”, and enter the correct Service ID for the channel.
Note:
•
For best performance, the “Include ECM in http streams” setting must be enabled. If your image supports it (openpli, openatv), you can find it here: OpenWebif -> Settings -> Customize
•
If the setting is not available, you may need to adjust the “ECM fix delay” setting in oscam webif (Config -> Stream Relay). Increase/Lower it until there is no stuttering.
•
-
There are 5 versions of Oscam I have compiled, all of them are the same
-
Can someone please tell me how to change information displayed on stb from server address and port to reader name. or can both be displayed.
-
There are 5 versions of Oscam I have compiled, all of them are the same
this is stream relay for caid 0E00
[streamrelay]
stream_relay_enabled = 0
stream_ecm_delay = 300
stream_emm_enabled = 1
stream_relay_ctab = 0E00
= 0E00
-
2021/01/26 17:18:49 08CD6F5E c (ecm) dvbapi (0E00@000000/0000/05DC/40:68A05D6276D0B1AA784D881A0BF97387): found (1 ms) by SoftCam.Keys - Science Turkey HD
2021/01/26 17:18:50 54A119BE r (emu) FATAL ERROR: pthread_mutex_lock() failed in powervu_ecm with error 22 Invalid argument
[global]
logfile = /dev/tty
clienttimeout = 8000
maxlogsize = 1024
waitforcards = 0
waitforcards_extra_delay = 100
preferlocalcards = 1
disablecrccws_only_for = 0E00:000000
[streamrelay]
stream_relay_enabled = 0
stream_ecm_delay = 300
stream_emm_enabled = 1
stream_relay_ctab = 0E00
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
listen_port = 20000
delayer = 60
user = dvbapi
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 1
boxtype = pc
[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255
-
2021/01/26 17:18:49 08CD6F5E c (ecm) dvbapi (0E00@000000/0000/05DC/40:68A05D6276D0B1AA784D881A0BF97387): found (1 ms) by SoftCam.Keys - Science Turkey HD
2021/01/26 17:18:50 54A119BE r (emu) FATAL ERROR: pthread_mutex_lock() failed in powervu_ecm with error 22 Invalid argument
[global]
logfile = /dev/tty
clienttimeout = 8000
maxlogsize = 1024
waitforcards = 0
waitforcards_extra_delay = 100
preferlocalcards = 1
disablecrccws_only_for = 0E00:000000
[streamrelay]
stream_relay_enabled = 0
stream_ecm_delay = 300
stream_emm_enabled = 1
stream_relay_ctab = 0E00
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
listen_port = 20000
delayer = 60
user = dvbapi
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 1
boxtype = pc
[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255
-
dvbviewer is working ( Didn't work with Oscam )
-
TRY this
-
TRY this
ok
-
dvbviewer is working ( Didn't work with Oscam )
ok
-
TRY this
ok
[reader]
label = PowerVU-EMU
protocol = emu
device = emulator
services = !powervu 4.8e 0.8e delete this
disablecrccws_only_for = 0E00:000000
cacheex = 1
caid = 0E00
detect = cd
ident = 0E00:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0E00:000000
cacheex = 1
caid = 0E00
detect = cd
ident = 0E00:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0E00:000000
disablecrccws_only_for = 0E00:000000
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!