where could find respberry oscam
The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread
-
- Various Support
- elton74
- Thread is marked as Resolved.
There are 2,399 replies in this Thread which was already clicked 479,183 times. The last Post () by abu baniaz.
-
-
Use IPC for raspberry and compile oscam with
o compile -
-
Use IPC for raspberry and compile oscam with
o compilesend comands
-
Search this board
-
Hello
Best version oscam-emu for dreambox & vuplus and best config
The best version for multi cs server it's good?
-
Hello dear managers and friends, a question about Oscam emu 11691 I have. I wanted to know in Oscam emu 11691 account cccam In your file cccam.cfg It is better to enter in the file oscam.server To enter. For better quality and higher stability in opening account card channels cccam Insert one of the files I mentioned above. Thank you for your help. Thank
-
Hello dear managers and friends
Regarding Oscam emu 11691 And insert an account cccam according to the relevant structure in the file cccam.cfg that whatever I did, no channel was opened while the account cccam Import yourself according to the relevant structure of the file oscam.server I say the channels open well. I had a request that you tell me exactly what I should do to get an account cccam Import the file cccam.cfg to open the channels. Please help me so that I can use the feature cccam.cfg At Oscam emu 11691 I will also use. Thank you. I am waiting for your answer, dear ones.
-
Install oscam in your image use the configs files in my Signatur and edit only
Device = address,port
User
Pass
with your data … restart oscam -
Hello dear managers and friends
Regarding Oscam emu 11691 And insert an account cccam according to the relevant structure in the file cccam.cfg that whatever I did, no channel was opened while the account cccam Import yourself according to the relevant structure of the file oscam.server I say the channels open well. I had a request that you tell me exactly what I should do to get an account cccam Import the file cccam.cfg to open the channels. Please help me so that I can use the feature cccam.cfg At Oscam emu 11691 I will also use. Thank you. I am waiting for your answer, dear ones.
Install oscam in your image use the configs files in my Signatur and edit only
Device = address,port
User
Pass
with your data … restart oscamHello dear friend about the emulator Oscam emu 11691 Let me state the following to make my problem clearer.
I put in an account cccam In the file oscam.server And open channels using files oscam.server I do not have a problem.
My problem using the file cccam.cfg that is by placing an account cccam In the file cccam.cfg Unfortunately the channels do not open.
My emphasis on using the file cccam.cfg At Oscam emu 11691 This is because, for example, if I wanted package channels NC+ With the Nagra system of one C line do not code to have this feature and I can do it easily.
Example of restricting C line In the file cccam.cfg I brought it down.
C: yourhost.dyndns.org 12000 user pass no {1806:0}
-
Quick question because I've been running an older version of Oscam-Emu for over a year. PV and BISS only.
What cardless and no server modes (standalone receiver/no IP connection/no cards) will the latest version open? -
Quick question because I've been running an older version of Oscam-Emu for over a year. PV and BISS only.
What cardless and no server modes (standalone receiver/no IP connection/no cards) will the latest version open?Phenomenal response.
I asked this question because out of curiosity I flashed openatv 7.0 in slot 2 on an osmio 4k.
So far it's stable. I found and installed the ipk feed but had issues after installing oscam-emu from it.
I could not clear PV channels and noticed that there were 47 (exaggerated) readers but no emulator.
After a few opkg remove commands in terminal and trying different versions I found another secret feed on another site.
I found that OSCam r11693-798 finally worked. But it required some work.
47 readers (again). All seemingly card related (I don't use cards....PV and Biss only). Edits in the files to paste emulator.
I got decoding in live log but no sound and video.
Finally pasted in the constant.cw section and all was working.
So. Now in Status of the webif I see emulator and dreamosat. And in Readers I see constant.cw and emulator.
A little confusing as to what is doing what.
Anyway its working. There are other schemes in my region besides what I mentioned above. And wondering which cardless ones I might get to clear.
Thanks!
-
Quick question because I've been running an older version of Oscam-Emu for over a year. PV and BISS only.
What cardless and no server modes (standalone receiver/no IP connection/no cards) will the latest version open?Phenomenal response.
I asked this question because out of curiosity I flashed openatv 7.0 in slot 2 on an osmio 4k.
So far it's stable. I found and installed the ipk feed but had issues after installing oscam-emu from it.
I could not clear PV channels and noticed that there were 47 (exaggerated) readers but no emulator.
After a few opkg remove commands in terminal and trying different versions I found another secret feed on another site.
I found that OSCam r11693-798 finally worked. But it required some work.
47 readers (again). All seemingly card related (I don't use cards....PV and Biss only). Edits in the files to paste emulator.
I got decoding in live log but no sound and video.
Finally pasted in the constant.cw section and all was working.
So. Now in Status of the webif I see emulator and dreamosat. And in Readers I see constant.cw and emulator.
A little confusing as to what is doing what.
Anyway its working. There are other schemes in my region besides what I mentioned above. And wondering which cardless ones I might get to clear.
Thanks!no changes for biss / powerVU / tandberg in a long time. As said before the change log for both the emu section and oscam itself can be found on github.
Openatv 7 is still a beta test image and python 3 at that, so do not expect much to work.
-
enigma2-plugin-softcams-oscam_11.695-emu-r798_all.ipk.rar - arm bin file missing.
-
OSCam ALL Images mips - arm - sh4
IMAGES LIST ::
#### OE2.5 IMAGES ##### DreamOSat camManager
Gemini GP3 image
OoZooN image
newnigma2 image
Dream-Elite OE2.5 image
SatLodge image
PeterPan image
TDW image
OpenTS/Ts image
#### OE2.0 IMAGES ##### DreamOSat camManager
Gemini GP3 image
OoZooN image
newnigma2 image
OpenTS/Ts image
Merlin3 image
Dream-Elite image
SatLodge image
PeterPan image
VTI image
Blackhole image
teamBlue image
NonSoloSat image
DDD-Demoni image
Domica image
LT image
TDW image
Egami image
SatdreamGr image
#### OE2.0 IMAGES ##### PBnigma-VIX image
PURE2 image
ruDREAM image
PKT image
ItalySat image
HDMU image
OpenATV image
OpenPLI image
OpenNFR image
OpenBlackhole image
OpenSPA image
OpenDroid image
OpenVIX image
OpenHDF image
OpenLD image
OpenESI image
OpenEight image
OpenMips image
OpenPlus image
Open Vision image
.:. Install .:.
OE2.0 Enigma2 ::
opkg install /tmp/*.ipk
or
opkg install --force-overwrite /tmp/*.ipk
.:. Remove .:.
OE2.0 Enigma2 ::
opkg remove enigma2-plugin-softcams-oscam
OE2.5 DreamOS:
.:. Install .:.
dpkg -i /tmp/*.deb
or
dpkg -i --force-overwrite /tmp/*.deb
.:. Remove .:.
opkg remove enigma2-plugin-softcams-oscam-osdreambox
or
dpkg -r enigma2-plugin-softcams-oscam-osdreambox
Any problem found in Oscam, please submit the problem here
The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread
Online Install
Hello MOHAMED_OS.
The arm bin file missing.
-
please sir we need the OSCAM-SUPCAM and OSCAM-REVCAM version
-
please sir we need the OSCAM-SUPCAM and OSCAM-REVCAM version
please in attachment
OScam+SupCam 11695
and
OScam+RevCamV2 11695
-Corrected spelling errors in log messages and comments
-
Any auto installer for Linux PC ?
-
Hi brother
Dont connected GP4.1
WHY?
-
for now no
the log or the error
install from this commend
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!