I know that I have to match the OSCAM-EMU to my chipset but there are more than one version here.
The Edision Mio 4K has a ARM chipset.
If you`re not sure which file you need, use the ipk versions that support all images and architectures/chipsets/processors.
Hey!
TNAP was specifically designed for the USA. Native softcam install capability was disabled and trying to install an ipk will fail unless dependencies are installed first. In the webif in settings>packages, click the all tab then search for libcrypto and install them.
Master g may have a more streamlined way to do it as he will immediately realize what dependencies are needed to make oscam-emu work.
I can help. If you attempt to install oscam and see the errors. Make note of them.
Why TNAP for rookie to complicated.
Use OpenPLI image or openatv install ipk cam or use cam feed and enjoy
Why TNAP for rookie to complicated.
Use OpenPLI image or openatv install ipk cam or use cam feed and enjoy
More like vato cavron like old clint eastwood movies.
You provided no useful information and therefore we shall consider you null and void.
But I do agree openatv and openvix (screw pli) do give a better out of box experience.
It would have been just as easy to blurt out what you did.
TNAP is tailored for the beginner, siiiiiiiiii. Jes, mang.
Perhaps the op isn't experienced as the el-capitain you appear to be. siiiiiiiii.
We can work out the tnap issue w/o the trade in the ford and get a toyota thing. estas el-bwayno por tu?
I don't know what u want 
I have the TNAP (the north american project) 4.2
I waisted many hours trying to get any cam to load, much less work
TNAP just would not recognize it, perhaps it needed dependencies loaded?
That's all definitely above my statue....
None of my other images had any problem loading and working oscam or ncam
So, I agree with atari, why TNAP?
Get another image
i'll show you how to fish. google being the fish.
look at your logs. see if you're missing anything.
haven't used tnap in a month. seems to be working still.
Thanks to everyone for your help. It is greatly appreciated!
I think I will take the advice and install another Image. I can always keep my TNAP for my satellite/channel/LNBF settings and use the Oscam friendly Image for viewing PV or entering Biss codes.
Thanks to everyone for your help. It is greatly appreciated!
I think I will take the advice and install another Image. I can always keep my TNAP for my satellite/channel/LNBF settings and use the Oscam friendly Image for viewing PV or entering Biss codes.
For tnap 4.2 you can install:
enigma2-plugin-extensions-levi45multicammanager_9.6-r12_all.ipk,
but is a bit complicated. It will allow you to use ncam and/or oscam.
your best bet is to install tnap 5, where you have sofcam menu in the plugins, with all the ingredients...
Ever since I installed the latest versions of Oscam-icam emu I'm having trouble opening the PowerVu channels except for AFN which works great.
I also tried different softcam keys, including mine.
I have already spent a lot of time trying to solve the problem, but not successfully.
Of course, I know something about this, but I obviously won't solve the matter myself.
So I'm asking, can you open the PowerVu channels on 16E (Ippica1/2 Snai), 4.8E (SIS Live), 1W (Occas.Feed). There was never a problem with these channels in the past.
Thanks for every reply
Cheers/ Sat-An
Is there really no one can answer the question, so that I will not waste time unnecessarily to solve the problem (can you open the PowerVu channels on 16E (Ippica1/2, Snai), 4.8E (SIS Live), 1W (Occas.Feed).
post # 2,150
Cheers/ Sat-An
1.0°W (12643 V): 
4.8°E (11727 H, 12418 H):
9.0°E (11804 V) au:
16.0°E (12724 H):
I was watching AFN this week on 9.0°E .
The otherones are also not working for me, so I think always the wrong keys..
Display MoreIs there really no one can answer the question, so that I will not waste time unnecessarily to solve the problem (can you open the PowerVu channels on 16E (Ippica1/2, Snai), 4.8E (SIS Live), 1W (Occas.Feed).
post # 2,150
Cheers/ Sat-An
1.0°W (12643 V):
4.8°E (11727 H, 12418 H):
9.0°E (11804 V) au:
16.0°E (12724 H):
I was watching AFN this week on 9.0°E .
The otherones are also not working for me, so I think always the wrong keys..
The problem is solved, I replaced Oscam config by atari with Oscam config by MOHAMED_OS and now all PowerVu channels work!
My configs not for powerVU channels !
This one are emu and keys use for powerVU Mohamed’s confs no problem
The otherones are also not working for me, so I think always the wrong keys..
What is other ones ?? Which channels ….
My configs not for powerVU channels !
This one are emu and keys use for powerVU Mohamed’s confs no problem
Sorry, but I didn't know that.
Sat-An
Can anyone help me - I am a bit confused.
I am looking for an .ipk with latest oscam emu and config files that will work on openatv 7.2 running on vuultimo4k.
Thankyou.
Can anyone help me - I am a bit confused.
I am looking for an .ipk with latest oscam emu and config files that will work on openatv 7.2 running on vuultimo4k.
Thankyou.
All images and receivers are supported in the same file ~ RE: Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT
Hi - thx for your help. So I go for 'enigma2-plugin-softcams-oscam_11718-emu-r798_all.ipk' - is this just the binary though. I am looking for an ipk with a basic set of config files included. My old VUUltimo4k just suddenly wont power on as of 2 days ago.
I have another one and am trying to set it up but I am getting config error :-
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 stopped descrambling for program 379F (Ale kino+ HD)
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1803 ECM_PID: 0397 PROVID: 000000
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0100 ECM_PID: 1FEB PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 1-4-2010
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 0507 PROVID: 000000
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0B01 ECM_PID: 1FD0 PROVID: 000000
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 4 CAID: 06ED ECM_PID: 06A3 PROVID: 000000
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 5 CAID: 1884 ECM_PID: 0514 PROVID: 000000
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 6 CAID: 186C ECM_PID: 1804 PROVID: 000000
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 7 CAID: 0500 ECM_PID: 0613 PROVID: 032A00
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 8 CAID: 1813 ECM_PID: 1FEB PROVID: 000068
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 ecmpid 9 CAID: 1870 ECM_PID: 0800 PROVID: 000000
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 found 10 ECM pids and 4 STREAM pids in CA PMT
2023/04/03 13:08:49 6555536B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2023/04/03 13:08:50 3FAD3A3D p (cccam) xxxxxx configuration error!
2023/04/03 13:08:53 6555536B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/04/03 13:08:54 6555536B c (config) 11 service-id's loaded in 0 ms
2023/04/03 13:08:57 6555536B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/04/03 13:09:03 3FAD3A3D p (-) -- Skipped 1 duplicated log lines --
2023/04/03 13:09:03 3FAD3A3D p (cccam) xxxxxx configuration error!
2023/04/03 13:09:03 6555536B c (dvbapi) Demuxer 0 stopped descrambling for program 0C25 (AXN HD)
2023/04/03 13:09:03 6555536B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1813 ECM_PID: 0835 PROVID: 000068
2023/04/03 13:09:03 6555536B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0B01 ECM_PID: 0899 PROVID: 000000
2023/04/03 13:09:03 6555536B c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0867 PROVID: 032A00
2023/04/03 13:09:03 6555536B c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1884 ECM_PID: 08FD PROVID: 000000
2023/04/03 13:09:03 6555536B c (dvbapi) Demuxer 0 found 4 ECM pids and 5 STREAM pids in CA PMT
2023/04/03 13:09:03 6555536B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2023/04/03 13:09:03 00000000 >> OSCam << cardserver log switched, version 1.20_svn, build r11715-798 (armv7-vuduo4k-linux-gnueabihf-libcurl)
2023/04/03 13:09:08 6555536B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/04/03 13:09:09 6555536B c (config) 12 service-id's loaded in 1 ms
2023/04/03 13:09:12 6555536B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/04/03 13:09:16 3FAD3A3D p (cccam) xxxxxx configuration error!
2023/04/03 13:09:17 6555536B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/04/03 13:09:29 3FAD3A3D p (-) -- Skipped 2 duplicated log lines --
Currently using OSCam_11715-r798, OpenATV 7.2 02aPR2023, VUUltimo4k
is this just the binary though. I am looking for an ipk with a basic set of config files included.
No, it also has configs included.
(cccam) xxxxxx configuration error!
You havn`t configured the reader properly in oscam.server
Don’t have an account yet? Register yourself now and be a part of our community!
