Help with Fransat config

Can anyone help me setup my Fransat V5 card in my solo2.

I did have it working on a VTI image; but seem to have broken everything on moving to OpenVix.

I am starting to wonder if my card has been locked somehow; is that possible?

I am running OpenVix 5.1.019 and Oscam oscam-1.20-unstable_svn-r9620.

One particularly irritating thing is I can't find the log files; they are not being stored where the conf file says and they're not under /var/log and they don't appear to have 'log' in the filename. Logging in over web interface I can see the log; but it scrolls out of window before one can see whats happened and history is not long enough.

As flicking through fransat chanels I see such entries in the log. Who is provider 043200? On googling I don't find that.

[DVBAPI] Receiver wants to demux srvid 1001 on adapter 0000 camask 0001 index 0000 pmtpid 038E

2018/03/04 16:37:35 5551F0 c [ADD PID 0] CAID: 0500 ECM_PID: 1EEB PROVID: 041950

2018/03/04 16:37:35 5551F0 c [ADD PID 1] CAID: 0500 ECM_PID: 1EEC PROVID: 0419A0

2018/03/04 16:37:35 5551F0 c [ADD PID 2] CAID: 0500 ECM_PID: 1EEF PROVID: 042820

2018/03/04 16:37:35 5551F0 c [ADD PID 3] CAID: 0500 ECM_PID: 1EE8 PROVID: 043200

2018/03/04 16:37:35 5551F0 c [ADD STREAM 0] CAID: 0500 ECM_PID: 1EEB PROVID: 041950

2018/03/04 16:37:35 5551F0 c [ADD STREAM 1] CAID: 0500 ECM_PID: 1EEC PROVID: 0419A0

2018/03/04 16:37:35 5551F0 c [ADD STREAM 2] CAID: 0500 ECM_PID: 1EEF PROVID: 042820

2018/03/04 16:37:35 5551F0 c [ADD STREAM 3] CAID: 0500 ECM_PID: 1EE8 PROVID: 043200

2018/03/04 16:37:35 5551F0 c [ADD STREAM 0] CAID: 0500 ECM_PID: 1EEB PROVID: 041950

2018/03/04 16:37:35 5551F0 c [ADD STREAM 1] CAID: 0500 ECM_PID: 1EEC PROVID: 0419A0

2018/03/04 16:37:35 5551F0 c [ADD STREAM 2] CAID: 0500 ECM_PID: 1EEF PROVID: 042820

2018/03/04 16:37:35 5551F0 c [ADD STREAM 3] CAID: 0500 ECM_PID: 1EE8 PROVID: 043200

2018/03/04 16:37:35 5551F0 c [ADD STREAM 0] CAID: 0500 ECM_PID: 1EEB PROVID: 041950

2018/03/04 16:37:35 5551F0 c [ADD STREAM 1] CAID: 0500 ECM_PID: 1EEC PROVID: 0419A0

2018/03/04 16:37:35 5551F0 c [ADD STREAM 2] CAID: 0500 ECM_PID: 1EEF PROVID: 042820

2018/03/04 16:37:35 5551F0 c [ADD STREAM 3] CAID: 0500 ECM_PID: 1EE8 PROVID: 043200

2018/03/04 16:37:35 5551F0 c Found 4 ECMpids and 6 STREAMpids in PMT

2018/03/04 16:37:35 5551F0 c [DVBAPI] Receiver wants to demux srvid 1001 on adapter 0000 camask 0001 index 0000 pmtpid 038E

2018/03/04 16:37:35 5551F0 c New program number: 1001 (0500:1001 unknown) [pmt_list_management 3]

2018/03/04 16:37:35 5551F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

2018/03/04 16:37:35 5551F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 0500 PROVID 043200 ECMPID 1EE8 PMTPID 038E (NO MATCHING READER)

2018/03/04 16:37:35 5551F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!

Been probably playing round with all config a bit much.

Have corrected the logfile and group stuff. Do now see logfile.

But still getting lines like....

• all 4 ecmpids!
• 2018/03/04 23:29:58 556370 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2018/03/04 23:29:59 556370 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 0500 PROVID 023A20 ECMPID 1C9F PMTPID 026C (NO MATCHING READER)
• 2018/03/04 23:29:59 556370 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!

So must that provider id be listed in the server config or not. I assume that is being streamed down from sat. Do I need keys registered explicitly for each provider and does each provider have to be listed in oscam.dvbapi?

Also which /dev/sci is the correct slot in my solo2?

Shall try again tomorrow evening.

Thanks for all suggestions. Will try and upload log also.

Does openvix really support ci+ with oscam. Or should I switch back to a vti image that I was successfully using with my fransat card before?