Did you burn the sd card with the image?
Check the root of that sd card.
There are 796 replies in this Thread which was already clicked 196,296 times. The last Post () by @hamid1387.
Did you burn the sd card with the image?
Check the root of that sd card.
I am sorry, since OpenWebIF is not working, I could not take screenshots of Enigma2 to post here.
I tried to install oscam emu IPK file but that did not work. However, I managed to use oscam emu by using the wicardd trick.
Excuse me in bad English
I do not know what the error is with me, after the boot from the sd card, the system neutrino in the background is in pink color, the channels search is ok, but there is no transition to enigma 2 or android. The enigma is not displayed on my screen at all :offended::offended:
network setting not working
how to set neitrino and enigma2 wicard
Hai.. My K3 pro success boot to enigma2 and success scan satellite and t2 but just list channel no video.. message : no data on tranponder (Timeout reading PAT)
Please help..
I am sorry, since OpenWebIF is not working, I could not take screenshots of Enigma2 to post here.
I tried to install oscam emu IPK file but that did not work. However, I managed to use oscam emu by using the wicardd trick.
what are the results and how its done?
what are the results and how its done?
Oscam Emu is working fine with this trick.
Here is the method:
1. Use "WinSCP" to connect to your box in Neutrino or Enigma2. Better to use "SFTP" mode rather than "FTP".
2. Go to "/usr/vitmod/wicard" and delete two files namely "wicardd" and "wicardd.conf".
3. Rename "oscam emu" bin file as "wicardd" and copy in the above mentioned location and set its attributes to 755.
4. Rename oscam emu "config" directory (with all necessary files inside) as "wicardd.conf" and copy to above mentioned location.
5. Restart the box.
but network setting not working
Same problems, the ROM Works smooth . Hope we can resolve network problem KIII pro44a0708b48.jpg
Problem solved with network...i have tested open-pli on K3pro.
Latest oscam-emu working well but power vu channels not open.
2019/03/21 17:46:55 3C3F032A c (ecm) dvbapiau (0E00:000000:0A8C:178B:0000:005E #ECM_L:40 #CW=D66DF8BC646DF44F0000000000000000 HOP:00): found (1 ms) by emulator - ID Xtra Europe HD
2019/03/21 17:46:56 3C3F032A c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
Still have too many bugs with audio, UHD channels etc.
see HERE post #129 by mihaip and HERE post #178 by the same user.
could you please make a tutorial steep by steep
I used this tutorial
- download image from : https://yadi.sk/d/qblad5LMFlY3JQ
- write image on mSDcard using Win32Imager or Rufus
- boot k3pro in Neutrino
- save detected Network settings !!!
- next-next-next ... till Live Screen !
- Menu and Reboot to Enigma2
in that steep when I restart enigma2 done black screenWhen i force to reboot by unpluging power my box not to reboot to vitmod
Display Morecould you please make a tutorial steep by steep
I used this tutorial
- download image from : https://yadi.sk/d/qblad5LMFlY3JQ
- write image on mSDcard using Win32Imager or Rufus
- boot k3pro in Neutrino
- save detected Network settings !!!
- next-next-next ... till Live Screen !
- Menu and Reboot to Enigma2in that steep when I restart enigma2 done black screenWhen i force to reboot by unpluging power my box not to reboot to vitmod
How can i change resolution becouse i have black screen :(
Display Morecould you please make a tutorial steep by steep
I used this tutorial
- download image from : https://yadi.sk/d/qblad5LMFlY3JQ
- write image on mSDcard using Win32Imager or Rufus
- boot k3pro in Neutrino
- save detected Network settings !!!
- next-next-next ... till Live Screen !
- Menu and Reboot to Enigma2in that steep when I restart enigma2 done black screenWhen i force to reboot by unpluging power my box not to reboot to vitmod
I followed this tutorial me too,
is important to burn on your sd card his image file. You did 1st and 2nd step?
Reboots works well on this image, no needed unpluging power cable.
THIS IMAGE ARE ONLY FOR K3PRO.
Yes I do it, but failed to reboot enigma2, but not sure for network config s I did only next next and saving parameters
i did it on my 1st try, it's easy.
Somehow you did something wrong...
try it again.
Can we use this image on k2 pro (s905) changing dtb file?
i have not idea, try it and post the results here.
Failed to reboot enigma 2 here's screen shoot after that black screen
in k1 pro can't connect to the network, in static IP,can you help please
Failed to reboot enigma 2 here's screen shoot after that black screen
very strange...:derpthink:
Don’t have an account yet? Register yourself now and be a part of our community!