just one big problem powervu still not working
Enigma2 for KI, KII & KIII
- mtahirghauri
- Thread is marked as Resolved.
There are 796 replies in this Thread which was already clicked 196,864 times. The last Post () by @hamid1387.
-
-
on kii pro s905d not work
-
-
What version of oscam have you installed? where can I download it? Does it give you cuts?
-
Is there any way to boot on Enigma2 from stock firmware? thx
-
Detalhes
replaces the oscam.bin you have. do not forget to give attributes 775.
Detalhes
-
Thank you
-
Thank you
And then what?
You replaced it with success?
Works good without freezes on ccam?
-
Hi, I tested it in k2 s905d v2 version, boot ok, search channels ok, but no image in channels, and no detect network card, no detect any usb.... Anyone else? Thanks.
-
Hi, I tested it in k2 s905d v2 version, boot ok, search channels ok, but no image in channels, and no detect network card, no detect any usb.... Anyone else? Thanks.
which image you has tested?
The openvision have same problems who you wrote above.
The other one, neutrino and openpli have some bugs but works good on k1pro and k3pro.
Im not sure but i think doesnt play on your box.
-
Openvision 7.0 r7 k2prov2, firm works very fast but with problems i wrote. I think Neutrino and openpli is not posibble on k2 models.
-
Thank you
And then what?
You replaced it with success?
Works good without freezes on ccam?
In my case this binary dont works at all.
I managed to make the enigma2 work normally, even with oscam updated. but unfortunately I did not get the enigma2 to open on a 4k tv. everything is dark and does not even open the home screen. Any solution?
You can share with us your oscam-emu.ipk installation file?
I was try to replace your binary file who you posted above without success.
I has installed oscam-emu from mihaip.
4k channels doent works properly yet.
still has cuts, the lines I use work perfect in coreelec. can it be the oscam configuration?
-
can it be the oscam configuration?
No, it because on my vu+ (enigma2 receiver) clines works perfect with the same configuration
and off course in coreelec on k3.
-
still has cuts
Give a try the new one oscam-emu 11516-795
seems like more stable.
OSCam svn11516 Emu-r795
Changeset [11516]
*fix bug in disablecrccws_only_for
*update for server & client cams!
Emu r795:
-Added support for BISS2 mode 1 and mode CA *
-Added support for DVB-CISSA algorithm
-Increased descramblers to the actual number available on each box **
-Other small optimizations and improvements
*BISS2 mode 1 works similar to BISS1 mode 1. BISS2 mode CA is competely different though.
From this version and on, building OSCam-Emu will require linking with libcrypto due to the extedned use of cryptographic functions in BISS2 code. This means that you must enable the USE_SSL=1 or USE_LIBCRYPTO=1 switches when compiling.
**Previously, OSCam-Emu only used 16 descramblers in enigma2 boxes. Now, all descramblers available in a box (modern boxes have 64 or even 96 descramblers) are used, which means many more channels can be descrambled simultaneously. Fox example, with 16 descramblers only 3 or 4 PowerVu channels could be descrambled at the same time, while with 64 we can descramble ~4 times more.
-
some powervu channel black screen
-
still has cuts
Give a try the new one oscam-emu 11516-795
seems like more stable.
OSCam svn11516 Emu-r795
Changeset [11516]
*fix bug in disablecrccws_only_for
*update for server & client cams!
Emu r795:
-Added support for BISS2 mode 1 and mode CA *
-Added support for DVB-CISSA algorithm
-Increased descramblers to the actual number available on each box **
-Other small optimizations and improvements
*BISS2 mode 1 works similar to BISS1 mode 1. BISS2 mode CA is competely different though.
From this version and on, building OSCam-Emu will require linking with libcrypto due to the extedned use of cryptographic functions in BISS2 code. This means that you must enable the USE_SSL=1 or USE_LIBCRYPTO=1 switches when compiling.
**Previously, OSCam-Emu only used 16 descramblers in enigma2 boxes. Now, all descramblers available in a box (modern boxes have 64 or even 96 descramblers) are used, which means many more channels can be descrambled simultaneously. Fox example, with 16 descramblers only 3 or 4 PowerVu channels could be descrambled at the same time, while with 64 we can descramble ~4 times more.
Which image of k3 works with it and how?
-
Which image of k3 works with it and how?
Vitmod neutrino and openpli image
follow instructions and install ipk file in post #210
then replace the oscam binary file via ftp with new one from above post.
oscam-emu binary file are in usr/bin.
pvu on 0.8W n 4.8E doesnt works, pvu on 9E works good.
-
Which image of k3 works with it and how?
Vitmod neutrino and openpli image
follow instructions and install ipk file in post #210
then replace the oscam binary file via ftp with new one from above post.
oscam-emu binary file are in usr/bin.
pvu on 0.8W n 4.8E doesnt works, pvu on 9E works good.
Thanks, but am not used to ftp so i will have to learn it:eye roll:. Otherwise i would prefer ipk file.
-
can some one uplod oscam-emu svn 11516 ipk format for k3 pro
-
Try this one, I have used ocam-emu 11517 bin compiled for osmio 4k (aarch64) in this:
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!