How to added or edit existing reader ?

**Sat-An** · Mar 17th 2018

Is it possible to configure oscam reader (v_11400) for CS and PV auto roll?

If it's help, please.

Thanks in advance/ Sa-An

**Sat-An** · Mar 18th 2018

Since there is no advice on how to solve my problem, I will describe it slightly more precisely.

Box: DM800HD-se
Image: NewNigma2
Emu: OScam's v.11400

SoftCam.Key reader works fine (by default) !
C_line (CCcam) through OScam works fine !
P_vu, if the Keys is valid working fine !

The problem is just, how to edit the auto roll reader for P_vu.
On AFN services get only audio NO picture ?
If I change (Camd Choice) from OScam Emu, to Mgcamd, the picture appears for a few seconds.

Where is the problem in my configuration I do not know, so I need advice from someone who has more knowledge and experience.

[reader]

label = oscam

description = CCcam_cs

protocol = cccam

device = xywz...

user = abcd...

password = xxxyyy...

cccversion = 2.3.0

cccwantemu = 1

ccckeepalive = 1

audisabled = 1

group = 1

[reader]

label = emulator

protocol = emu

device = emulator

caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010

ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000 000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000 ;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

detect = cd

emmcache = 2,2,2,0

saveemm-u = 1

group = 2

Best Regards/ Sat-An

**master G** · Mar 18th 2018

Autoroll isn`t configured on the reader. AU needs enabled in [dvbapi] and [account], as well as valid EMM keys in SoftCam.Key file.

Have a look at this thread -> Oscam-emu Autoroll via emm ?

**Sat-An** · Mar 18th 2018

Quote from master G

Autoroll isn`t configured on the reader. AU needs enabled in [dvbapi] and [account], as well as valid EMM keys in SoftCam.Key file.

Have a look at this thread -> Oscam-emu Autoroll via emm ?

AU needs enabled in [dvbapi] and [account] -------- Yes it is.

[reader]

label = oscam

description = CCcam_cs

protocol = cccam

device = xywz...

user = abcd...

password = xxxyyy...

cccversion = 2.3.0

emmcache = 2,2,2,0

saveemm-u = 1

cccwantemu = 1

ccckeepalive = 1

audisabled = 1

group = 1

Is this reader o.k. now ?

I'm removed second reader and added

emmcache = 2,2,2,0

saveemm-u = 1

in too the first one.

Now I'm back where I was three days ago.

On AFN services get only audio NO picture ?

If I change (Camd Choice) from OScam Emu, to Mgcamd or Cccam, the picture appears for a few seconds.

The auto-roll obviously works. On Ecm status I can obsrve how Cw is changing.

I don't understand why the Audio is o.k. but no picture ?

**georgeflu** · Mar 18th 2018

you need to add (or modify if already excist) those two readers for afn

Code

[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
services                      = !afn
cacheex_maxhop                = 1
cacheex_allow_request         = 1
caid                          = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect                        = cd
ident                         = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group                         = 2
emmcache                      = 2,1,2,1
emu_auproviders               = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid                      = 000E00



[reader]
label                         = AFN
description                   = AFN-EMU
protocol                      = emu
device                        = Emulator
services                      = afn
cacheex                       = 1
cacheex_maxhop                = 1
cacheex_allow_request         = 1
caid                          = 0E00
detect                        = cd
group                         = 4
emmcache                      = 1,5,31,1
emu_auproviders               = 0E00:000000
auprovid                      = 000E00

Display More

also you need a softcam.key which have to contain also the emm keys for au.

johndeere88 · Mar 19th 2018

Quote from Sat-An

I don't understand why the Audio is o.k. but no picture ?

I,ve seen this before on certain providers, i think tring was one of them and in my case it was due to the viewing card not updating,in your case i assume it will be due to an invalid key

**Sat-An** · Mar 19th 2018

you need to add (or modify if already exist) those two readers for afn

Now auto roll works, but now I'm lost Cs c_line through oscam-emu (protocol = CCcam). I had to remove it, comment on. So, oscam can't read two different protocols, I guess.

Thank you very much @ jgeorgeflu & master G

Sat-An

**georgeflu** · Mar 19th 2018

no you are guessing wrong.

most people are using those two protocols without any problem. you are doing something wrong.

**georgeflu** · Mar 19th 2018

try just to replace with your dns,user/pass

Code

[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
services                      = !afn
cacheex_maxhop                = 1
cacheex_allow_request         = 1
caid                          = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect                        = cd
ident                         = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group                         = 2
emmcache                      = 2,1,2,1
emu_auproviders               = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid                      = 000E00



[reader]
label                         = AFN
description                   = AFN-EMU
protocol                      = emu
device                        = Emulator
services                      = afn
cacheex                       = 1
cacheex_maxhop                = 1
cacheex_allow_request         = 1
caid                          = 0E00
detect                        = cd
group                         = 4
emmcache                      = 1,5,31,1
emu_auproviders               = 0E00:000000
auprovid                      = 000E00








[reader]
label                         = CCcam-server
protocol                      = cccam_mcs
device                        = server,port
user                          = user
password                      = pass
inactivitytimeout             = 30
group                         = 1
cccversion                    = 2.2.1
cccmaxhops                    = 2
ccckeepalive                  = 1
audisabled                    = 1

[reader]
label                         = CCcam-server2
protocol                      = cccam_mcs
device                        = server,port
user                          = user
password                      = pass
inactivitytimeout             = 30
group                         = 1
cccversion                    = 2.2.1
cccmaxhops                    = 2
ccckeepalive                  = 1
audisabled                    = 1

Display More

**Sat-An** · Mar 19th 2018

try just to replace with your dns,user/pass

I tested...

It's totally the same thing as before. With the reader protocol cccam works everything, except PV autoroll. Autoroll Riders must be disabled.

With PV autoroll, works only PV autoroll, even SoftCam Key doesn't read.

Reader Cccam must be disabled, otherwise there is nothing.

Best Regards/ Sat-An

**Sat-An** · Mar 23rd 2018

I managed to sort things out, so everything works now. I had to completely disable or remove the second AFN reader and edit the first (Autoroll all).

Thanks to everyone for help.

With respect/ Sat-An

[reader]

label = oscam_emu

protocol = emu

device = emulator

caid = 1010,0500,1FFF,2600,0E00

detect = cd

ident = 1010:000000;0500:023800,021110,007400,007800;2600:000000;1FFF:000000;0E00:000000

group = 2

emmcache = 2,2,2,0

saveemm-u = 1

cacheex = 1 # <-------- added

lb_weight = 1000

emu_auproviders = 0E00:000000

auprovid = 000E00

**Sat-An** · Mar 28th 2018

Any idea how to edit the autoroll reader to read SoftCam Key??

If the "cacheex = 1" is present in the autoroll [reader], it can't read the SoftCam Key.

But, autoroll doesn't work, if it doesn't exist in the reader or is it disabled.

Oscam-emu reads SoftCam Key by default, so this command obviously disables it.

**georgeflu** · Mar 28th 2018

i don't know what is wrong in your config (i have no time to check it step by step) but i know that everything is ok in mine.

so take those configs,add/replace your lines,add a softcam.key which contains the emm and you should be ok.

a few things to take care

1) i am using port 16002 you can change it in oscam conf)

2) there is a known bug in afn reader,and sometimes oscam does not start. check if it works...

**Sat-An** · Mar 28th 2018

I tested it ....

Exactly the same thing. I'm a little guessing, that it's not possible to have both of them at all, reading SoftCam Key and Autoroll in the same configuration, cacheex = 1 is really problematic.

with respect / Sat-An

**georgeflu** · Mar 29th 2018

strange...! i don't know what could be the problem to your receiver, but it is more than clear,that using the configs i uploaded,works for me both (lines and autoroll for afn and other powervu channels in 0.8W)

**Sat-An** · Mar 29th 2018

strange...! i don't know what could be the problem to your receiver, but it is more than clear,that using the configs i uploaded,works for me both (lines and autoroll for afn and other powervu channels in 0.8W)

You're right, everything works great!!!

I finally managed to edit the issue, with some changes to the entries in your config, everything works perfectly.

Thank you for your help.

Regards / Sat-An

**georgeflu** · Mar 29th 2018

:thumbup: nice...

it could be nice also,to writte the changes that you did,and may it help any other member with same problem...

**Sat-An** · Mar 29th 2018

Quote from georgeflu

:thumbup: nice...

it could be nice also,to writte the changes that you did,and may it help any other member with same problem...

Can I send a complete config with keys, or it must be without keys ???

Sat-An

**georgeflu** · Mar 30th 2018

for keys,there are other sections...

anyway,i suppose that you done changes in oscam.server file,so you can in "code" your oscam.server file...

**Sat-An** · Mar 30th 2018

Tested and works 100% on

DM800HD-se

Newnigma2

OScam-emu ver. 1400

Attention on, where your oscam_emu version stores the keys, and the rest of the others config entries !!!

Newer one to: usr / keys, directly without a folder!

Older in: var / tuxbox / config.

The attached folder is defined for OE 2, (oscam conf> dvbapi> extended_cw_api = 2

For OE 2.2, change the entry, extended_cw_api = 1

How to added or edit existing reader ?

OSCam-EMU Support Forum

Participate now!

Share