Is it possible to configure oscam reader (v_11400) for CS and PV auto roll?
If it's help, please.
Thanks in advance/ Sa-An
Is it possible to configure oscam reader (v_11400) for CS and PV auto roll?
If it's help, please.
Thanks in advance/ Sa-An
Since there is no advice on how to solve my problem, I will describe it slightly more precisely.
Box: DM800HD-se
Image: NewNigma2
Emu: OScam's v.11400
SoftCam.Key reader works fine (by default) !
C_line (CCcam) through OScam works fine !
P_vu, if the Keys is valid working fine !
The problem is just, how to edit the auto roll reader for P_vu.
On AFN services get only audio NO picture ?
If I change (Camd Choice) from OScam Emu, to Mgcamd, the picture appears for a few seconds.
Where is the problem in my configuration I do not know, so I need advice from someone who has more knowledge and experience.
[reader]
label = oscam
description = CCcam_cs
protocol = cccam
device = xywz...
user = abcd...
password = xxxyyy...
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1
audisabled = 1
group = 1
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000 000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000 ;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
detect = cd
emmcache = 2,2,2,0
saveemm-u = 1
group = 2
Best Regards/ Sat-An
Autoroll isn`t configured on the reader. AU needs enabled in [dvbapi] and [account], as well as valid EMM keys in SoftCam.Key file.
Have a look at this thread -> Oscam-emu Autoroll via emm ?
Autoroll isn`t configured on the reader. AU needs enabled in [dvbapi] and [account], as well as valid EMM keys in SoftCam.Key file.
Have a look at this thread -> Oscam-emu Autoroll via emm ?
AU needs enabled in [dvbapi] and [account] -------- Yes it is.
[reader]
label = oscam
description = CCcam_cs
protocol = cccam
device = xywz...
user = abcd...
password = xxxyyy...
cccversion = 2.3.0
emmcache = 2,2,2,0
saveemm-u = 1
cccwantemu = 1
ccckeepalive = 1
audisabled = 1
group = 1
Is this reader o.k. now ?
I'm removed second reader and added
emmcache = 2,2,2,0
saveemm-u = 1
in too the first one.
Now I'm back where I was three days ago.
On AFN services get only audio NO picture ?
If I change (Camd Choice) from OScam Emu, to Mgcamd or Cccam, the picture appears for a few seconds.
The auto-roll obviously works. On Ecm status I can obsrve how Cw is changing.
I don't understand why the Audio is o.k. but no picture ?
you need to add (or modify if already excist) those two readers for afn
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group = 2
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = Emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
detect = cd
group = 4
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
Display More
also you need a softcam.key which have to contain also the emm keys for au.
I don't understand why the Audio is o.k. but no picture ?
I,ve seen this before on certain providers, i think tring was one of them and in my case it was due to the viewing card not updating,in your case i assume it will be due to an invalid key
you need to add (or modify if already exist) those two readers for afn
Now auto roll works, but now I'm lost Cs c_line through oscam-emu (protocol = CCcam). I had to remove it, comment on. So, oscam can't read two different protocols, I guess.
Thank you very much @ jgeorgeflu & master G
Sat-An
no you are guessing wrong.
most people are using those two protocols without any problem. you are doing something wrong.
try just to replace with your dns,user/pass
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 090F,0500,1801,0604,0E00,4AE1,1010,09BE,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;0E00:000000,000002;4AE1:000011,000014,0000FE;1010:000000;2600:000000;FFFF:000000
group = 2
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
auprovid = 000E00
[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = Emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
detect = cd
group = 4
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
[reader]
label = CCcam-server
protocol = cccam_mcs
device = server,port
user = user
password = pass
inactivitytimeout = 30
group = 1
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
[reader]
label = CCcam-server2
protocol = cccam_mcs
device = server,port
user = user
password = pass
inactivitytimeout = 30
group = 1
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
Display More
try just to replace with your dns,user/pass
I tested...
It's totally the same thing as before. With the reader protocol cccam works everything, except PV autoroll. Autoroll Riders must be disabled.
With PV autoroll, works only PV autoroll, even SoftCam Key doesn't read.
Reader Cccam must be disabled, otherwise there is nothing.
Best Regards/ Sat-An
I managed to sort things out, so everything works now. I had to completely disable or remove the second AFN reader and edit the first (Autoroll all).
Thanks to everyone for help.
With respect/ Sat-An
[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 1010,0500,1FFF,2600,0E00
detect = cd
ident = 1010:000000;0500:023800,021110,007400,007800;2600:000000;1FFF:000000;0E00:000000
group = 2
emmcache = 2,2,2,0
saveemm-u = 1
cacheex = 1 # <-------- added
lb_weight = 1000
emu_auproviders = 0E00:000000
auprovid = 000E00
Any idea how to edit the autoroll reader to read SoftCam Key??
If the "cacheex = 1" is present in the autoroll [reader], it can't read the SoftCam Key.
But, autoroll doesn't work, if it doesn't exist in the reader or is it disabled.
Oscam-emu reads SoftCam Key by default, so this command obviously disables it.
i don't know what is wrong in your config (i have no time to check it step by step) but i know that everything is ok in mine.
so take those configs,add/replace your lines,add a softcam.key which contains the emm and you should be ok.
a few things to take care
1) i am using port 16002 you can change it in oscam conf)
2) there is a known bug in afn reader,and sometimes oscam does not start. check if it works...
I tested it ....
Exactly the same thing. I'm a little guessing, that it's not possible to have both of them at all, reading SoftCam Key and Autoroll in the same configuration, cacheex = 1 is really problematic.
with respect / Sat-An
strange...! i don't know what could be the problem to your receiver, but it is more than clear,that using the configs i uploaded,works for me both (lines and autoroll for afn and other powervu channels in 0.8W)
strange...! i don't know what could be the problem to your receiver, but it is more than clear,that using the configs i uploaded,works for me both (lines and autoroll for afn and other powervu channels in 0.8W)
You're right, everything works great!!!
I finally managed to edit the issue, with some changes to the entries in your config, everything works perfectly.
Thank you for your help.
Regards / Sat-An
:thumbup: nice...
it could be nice also,to writte the changes that you did,and may it help any other member with same problem...
:thumbup: nice...
it could be nice also,to writte the changes that you did,and may it help any other member with same problem...
Can I send a complete config with keys, or it must be without keys ???
Sat-An
for keys,there are other sections...
anyway,i suppose that you done changes in oscam.server file,so you can in "code" your oscam.server file...
Tested and works 100% on
DM800HD-se
Newnigma2
OScam-emu ver. 1400
Attention on, where your oscam_emu version stores the keys, and the rest of the others config entries !!!
Newer one to: usr / keys, directly without a folder!
Older in: var / tuxbox / config.
The attached folder is defined for OE 2, (oscam conf> dvbapi> extended_cw_api = 2
For OE 2.2, change the entry, extended_cw_api = 1
Don’t have an account yet? Register yourself now and be a part of our community!