OpenPLI-SSl84D-dm800-20180411
-
- Dreambox Clone Sim 2
- kloklo
- Thread is marked as Resolved.
-
-
it works on decoder sunray 4hd triple tuner sim 2.10? it works epg importer too?
-
How to install ccam on this firmware?
-
Very good image!Thanks
-
hey safe for clone?
best regards
-
This is for the clone !!!
-
SSl84D yes
-
is this works on DM800HD clone sim 2.01 ssl#84b ??
-
Thanks a lot! Awesome image. Openpli keeps to be the prefered image here on all receivers... :whistle:
-
is this works on DM800HD clone sim 2.01 ssl#84b ??
no for this image you need Clone Bootloader SSL 84D unrar it
Send ipk file via FTP (via DCC or FileZilla) to tmp> / var / temp
after over telnet:
opkg install /tmp/*.ipk
reboot
then flash image with less then 55mb
reboot
-
is this works on DM800HD clone sim 2.01 ssl#84b ??
no for this image you need Clone Bootloader SSL 84D unrar it
Send ipk file via FTP (via DCC or FileZilla) to tmp> / var / temp
after over telnet:
opkg install /tmp/*.ipk
reboot
then flash image with less then 55mb
reboot
My box not accept more then 50mb file. how wrong if i install boot loader image via default webif update? however i checked with serial port download also and succeed. show on front panel #84B bold text and 84D small in bottom.
-
is this works on DM800HD clone sim 2.01 ssl#84b ??no for this image you need Clone Bootloader SSL 84D unrar it
Send ipk file via FTP (via DCC or FileZilla) to tmp> / var / temp
after over telnet:
opkg install /tmp/*.ipk
reboot
then flash image with less then 55mb
reboot
My box not accept more then 50mb file. how wrong if i install boot loader image via default webif update? however i checked with serial port download also and succeed. show on front panel #84B bold text and 84D small in bottom.
Flash image with bad sector recovery and you will recover a lot of flash memory. Then reboot and flash again image.
Emo -
is this works on DM800HD clone sim 2.01 ssl#84b ??no for this image you need Clone Bootloader SSL 84D unrar it
Send ipk file via FTP (via DCC or FileZilla) to tmp> / var / temp
after over telnet:
opkg install /tmp/*.ipk
reboot
then flash image with less then 55mb
reboot
My box not accept more then 50mb file. how wrong if i install boot loader image via default webif update? however i checked with serial port download also and succeed. show on front panel #84B bold text and 84D small in bottom.
Flash image with bad sector recovery and you will recover a lot of flash memory. Then reboot and flash again image.
Emokindly recommend me best sector recovery app. i use optiflasher pro but they never count any bad sector.
-
You activate it thru the BIOS or the DreamUp/JapharFlasher Menu, then next flash will have the BSR enabled and you will gain back the bad sectors that can be recovered... so probably few Mb you are missing now.
Emo
-
Thnsnks @emosim for your kind time for me.
I done it two times with old merlin software which has 39 to 40mb almost with old 82 second stage boot loader. using dreamup 1.3.3.7 and it almost takes 45 min on serial port. at the end all are done successfully. not shown any bad sector. but still when i try new one same error. i just like to ask. can i use original firmware with BSR enable or clone. because i use clone because my box is clone.
-
You can use the BSR with any NFI image, you can try once or twice or even more no problem, as it just activated a function to check every Flash memory sector to check if it's ok or not, and clean the one badly marked and set the ones that really are bad. So at the end often you get more flash memory, and this works on original as well as clone boxes.
Probably I would do this with the SSL84, as it manages the Flash memory in a different way than the old SSL82.
Emo
-
Do you have any idea about tunner doesn't lock signal issue.
-
thanks
-
Do you see the Tuner on the configuration menu or you see as empty ?
Which tuner is having your box, Sat, Terrestrial or Cable, and which model ? Generally it shows the "name/model" on the Tuner setup (name of the tuner shown, eg "Alps BSBE2 (DVB-S2)").
Emo
Do you have any idea about tunner doesn't lock signal issue.
-
Do you see the Tuner on the configuration menu or you see as empty ?
Which tuner is having your box, Sat, Terrestrial or Cable, and which model ? Generally it shows the "name/model" on the Tuner setup (name of the tuner shown, eg "Alps BSBE2 (DVB-S2)").
Emo
Do you have any idea about tunner doesn't lock signal issue.
Yes it shown tuner "Alps BSBE2 (DVB-S2) 801A" and Tuner type is Rev-M , i check both while remove it shown empty and when insert it shown proper tuner model and i select satelite go to sat finder and it shown LNB strength and signals too and instantly lock signals. but i put exact polarity the tuner lock sign gone. anyways i go to manual tp search add tp and try to search. no program found........
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!